# changelog

author: Kurt Stutsman <kstutsma@redhat.com> [2.6.32-568.el6]
changelog:
  - [base] reduce boot delay on large memory systems (Seth Jennings) [1221389]
  - [md] dm: run queue on re-queue (Mike Snitzer) [1225158]
  - [fs] take i_mutex during prepare_binprm for set<u,g>id executables (Mateusz Guzik) [1216269] {CVE-2015-3339}
  - [netdrv] i40e: Make sure to be in VEB mode if SRIOV is enabled at probe (Stefan Assmann) [1206000]
  - [netdrv] i40e: start up in VEPA mode by default (Stefan Assmann) [1206000]
  - [netdrv] e1000e: Bump the version to 3.2.5 (John Greene) [1211531]
  - [netdrv] e1000e: fix unit hang during loopback test (John Greene) [1211531]
  - [netdrv] e1000e: fix systim issues (John Greene) [1211531]
  - [netdrv] e1000e: fix legacy interrupt handling in i219 (John Greene) [1211531]
  - [netdrv] e1000e: fix flush_desc_ring implementation (John Greene) [1211531]
  - [netdrv] e1000e: fix logical error in flush_desc_rings (John Greene) [1211531]
  - [netdrv] e1000e: remove call to do_div and sign mismatch warning (John Greene) [1211531]
  - [netdrv] e1000e: i219 execute unit hang fix on every reset or power state transition (John Greene) [1211531]
  - [netdrv] e1000e: i219 fix unit hang on reset and runtime D3 (John Greene) [1211531]
  - [netdrv] e1000e: fix call to do_div to use u64 arg (John Greene) [1211531]
  - [netdrv] e1000e: Cleanup handling of VLAN_HLEN as a part of max frame size (John Greene) [1211531]
  - [netdrv] e1000e: Correctly include VLAN_HLEN when changing interface MTU (John Greene) [1211531]
  - [netdrv] e1000e: call netif_carrier_off early on down (John Greene) [1211531]


author: Kurt Stutsman <kstutsma@redhat.com> [2.6.32-569.el6]
changelog:
  - [gpu] drm/radeon: fix freeze for laptop with Turks/Thames GPU (Jerome Glisse) [1213297]
  - [md] dm: fix casting bug in dm_merge_bvec (Mike Snitzer) [1226453]
  - [fs] nfs: Send the size attribute on open(O_TRUNC) (Benjamin Coddington) [1208065]
  - [net] inet: fix processing of ICMP frag_needed messages (Sabrina Dubroca) [1210321]
  - [net] tcp: double default TSQ output bytes limit (Hannes Frederic Sowa) [1140590]
  - [hv] hv_balloon: correctly handle num_pages>INT_MAX case (Vitaly Kuznetsov) [1006234]
  - [hv] hv_balloon: correctly handle val.freeram<num_pages case (Vitaly Kuznetsov) [1006234]
  - [hv] hv_balloon: survive ballooning request with num_pages=0 (Vitaly Kuznetsov) [1006234]
  - [hv] hv_balloon: eliminate jumps in piecewiese linear floor function (Vitaly Kuznetsov) [1006234]
  - [hv] hv_balloon: do not online pages in offline blocks (Vitaly Kuznetsov) [1006234]
  - [hv] hv_balloon: don't lose memory when onlining order is not natural (Vitaly Kuznetsov) [1006234]


author: Kurt Stutsman <kstutsma@redhat.com> [2.6.32-570.el6]
changelog:
  - [block] fix ext_dev_lock lockdep report (Jeff Moyer) [1230927]
  - [md] Revert "md dm: run queue on re-queue" (Mike Snitzer) [1232007]
  - [firmware] another cxgb4 firmware load fixup (Sai Vemuri) [1189255]
  - [char] tty: Don't protect atomic operation with mutex (Aristeu Rozanski) [1184182]
  - [edac] i5100 add 6 ranks per channel (Aristeu Rozanski) [1171333]
  - [edac] i5100 clean controller to channel terms (Aristeu Rozanski) [1171333]
  - [crypto] rng - Remove krng (Herbert Xu) [1226418]
  - [crypto] drbg - Add stdrng alias and increase priority (Herbert Xu) [1226418]
  - [crypto] seqiv - Move IV seeding into init function (Herbert Xu) [1226418]
  - [crypto] eseqiv - Move IV seeding into init function (Herbert Xu) [1226418]
  - [crypto] chainiv - Move IV seeding into init function (Herbert Xu) [1226418]


author: Kurt Stutsman <kstutsma@redhat.com> [2.6.32-571.el6]
changelog:
  - [netdrv] bnx2x: Move statistics implementation into semaphores (Michal Schmidt) [1231348]
  - [scsi] storvsc: Set the SRB flags correctly when no data transfer is needed (Vitaly Kuznetsov) [1221404]


author: Kurt Stutsman <kstutsma@redhat.com> [2.6.32-573.el6]
changelog:
  - [security] selinux: don't waste ebitmap space when importing NetLabel categories (Paul Moore) [1130197]
  - [x86] Revert "Add driver auto probing for x86 features v4" (Prarit Bhargava) [1231280]
  - [net] bridge: netfilter: don't call iptables on vlan packets if sysctl is off (Florian Westphal) [1236551]
  - [net] ebtables: Allow filtering of hardware accelerated vlan frames (Florian Westphal) [1236551]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.2.1.el6]
changelog:
  - [net] udp: fix behavior of wrong checksums (Denys Vlasenko) [1240758 1240759] {CVE-2015-5364 CVE-2015-5366}
  - [fs] vfs: Unhash and evict unused children dentries after rmdir (Lukas Czerner) [1243400 1241030]
  - [fs] vfs: Prevent syncing frozen file system (Lukas Czerner) [1243404 1241791]
  - [fs] vfs: Prevent freeing unlinked file to be indefinitely delayed (Lukas Czerner) [1243406 1236736]
  - [fs] vmcore: continue vmcore initialization if PT_NOTE is found empty (Baoquan He) [1245195 1236437]
  - [fs] vmcore: prevent PT_NOTE p_memsz overflow during header update (Baoquan He) [1245195 1236437]
  - [kernel] audit/fix non-modular users of module_init in core code (Baoquan He) [1245195 1236437]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.3.1.el6]
changelog:
  - [md] Revert "dm: don't schedule delayed run of the queue if nothing to do" (Mike Snitzer) [1246095 1240767]
  - [md] Revert "dm: only run the queue on completion if congested or no requests pending" (Mike Snitzer) [1246095 1240767]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.4.1.el6]
changelog:
  - [firmware] add iwlwifi-8000C-13 ucode (Stanislaw Gruszka) [1242969 1134603]
  - [net] Always propagate flag changes to interfaces (Jarod Wilson) [1253734 1222823]
  - [s390] zcrypt: Fixed reset and interrupt handling of AP queues (Hendrik Brueckner) [1253729 1238308]
  - [scsi] zfcp: Use correct length for FCP_RSP_INFO (Hendrik Brueckner) [1253728 1223105]
  - [tools] perf: avoid possible race condition in copyfile (Milos Vyletel) [1253733 1229673]
  - [tools] perf: Introduce copyfile_offset function (Milos Vyletel) [1253733 1229673]
  - [tools] perfs: Add rm_rf utility function (Milos Vyletel) [1253733 1229673]
  - [net] vlan: restore VLAN_GROUP_ARRAY_LEN definition (Michal Schmidt) [1246102 1242145]
  - [md] dm btree remove: fix bug in redistribute3 (Mike Snitzer) [1246105 1242023]
  - [netdrv] vmxnet3: prevent receive getting out of sequence on napi poll (Neil Horman) [1246092 1236564]
  - [kernel] sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem (Oleg Nesterov) [1246081 1198732]
  - [kernel] percpu_rw_semaphore: add lockdep annotations (Oleg Nesterov) [1246081 1198732]
  - [kernel] percpu_rw_semaphore: kill ->writer_mutex, add ->write_ctr (Oleg Nesterov) [1246081 1198732]
  - [kernel] percpu_rw_semaphore: reimplement to not block the readers unnecessarily (Oleg Nesterov) [1246081 1198732]
  - [kernel] percpu-rwsem: use synchronize_sched_expedited (Oleg Nesterov) [1246081 1198732]
  - [kernel] percpu-rw-semaphores: use rcu_read_lock_sched (Oleg Nesterov) [1246081 1198732]
  - [kernel] percpu-rw-semaphores: use light/heavy barriers (Oleg Nesterov) [1246081 1198732]
  - [kernel] blockdev: turn a rw semaphore into a percpu rw semaphore (Oleg Nesterov) [1246081 1198732]
  - [kernel] softirq: Add softirq_2ms_loop and default to existing RHEL6 behaviour (Prarit Bhargava) [1246064 970263]
  - [kernel] softirq: reduce latencies (Prarit Bhargava) [1246064 970263]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.7.1.el6]
changelog:
  - Revert: [kernel] softirq: reduce latencies (Prarit Bhargava) [1246064 970263]
  - Revert: [kernel] softirq: Add softirq_2ms_loop and default to existing RHEL6 behaviour (Prarit Bhargava) [1246064 970263]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.8.1.el6]
changelog:
  - [netdrv] bonding: fix LACP PDU not sent on slave port sometimes (Jarod Wilson) [1266366 1258446]
  - [netdrv] bonding: fix incorrect lacp mux state when agg not active (Jarod Wilson) [1266366 1258446]
  - [netdrv] bonding: fix bond_open don't always set slave active flag (Jarod Wilson) [1266366 1258446]
  - [netdrv] bonding: update bond carrier state when min_links option changes (Jarod Wilson) [1266366 1258446]
  - [netdrv] bonding: change AD_LINK_SPEED_BITMASK to enum to suport more speed (Jarod Wilson) [1266366 1258446]
  - [virt] kvm: ioapic: conditionally delay irq delivery duringeoi broadcast (Fam Zheng) [1266369 1199155]
  - [kernel] ipc, sem: fix use after free on IPC_RMID after a task using same semaphore set exits (Herton R. Krzesinski) [1266373 1233300]
  - [fs] xfs: extent size hints can round up extents past MAXEXTLEN (Leonardo Menezes Vaz) [1266372 1211110]
  - [fs] Remove BUG_ON in nfs_clear_inode (Frank Sorenson) [1266364 1224343]
  - [net] use address assign type "SET" (Jarod Wilson) [1266374 1225359]
  - [net] ethtool: set addr_assign_type to NET_ADDR_SET when addr is passed on create (Jarod Wilson) [1266374 1225359]
  - [net] rtnl: use dev_set_mac_address() instead of plain ndo_ (Jarod Wilson) [1266374 1225359]
  - [net] ipv4: inet_fragmentation: compute work more accurate (Hannes Frederic Sowa) [1246088 1235465]
  - [netdrv] bna: fix interrupts storm caused by erroneous packets (Ivan Vecera) [1260535 1241287]
  - [edac] pci: avoid negative reference count of edac_class (Herton R. Krzesinski) [1255492 1227845]
  - [kernel] percpu_counter: batch size aware __percpu_counter_compare (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] percpu_counter: make percpu_counters_lock irq-safe (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] lib/percpu_counter.c: fix bad percpu counter state during suspend (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] percpu_counter: unbreak __percpu_counter_add (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] lib/percpu_counter.c: fix __percpu_counter_add (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] percpu_counter: make APIs irq safe (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] lib/percpu_counter.c: __this_cpu_write doesn't need to be protected by spinlock (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] percpucounter: Optimize __percpu_counter_add a bit through the use of this_cpu options (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] percpu_counter: use this_cpu_ptr instead of per_cpu_ptr (Hannes Frederic Sowa) [1246088 1235465]
  - [kernel] percpu: fix list_head init bug in __percpu_counter_init (Hannes Frederic Sowa) [1246088 1235465]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.9.1.el6]
changelog:
  - [mm] hugetlb: fix race in region tracking (Herton R. Krzesinski) [1274599 1260755]
  - [mm] hugetlb: improve, cleanup resv_map parameters (Herton R. Krzesinski) [1274599 1260755]
  - [mm] hugetlb: unify region structure handling (Herton R. Krzesinski) [1274599 1260755]
  - [mm] hugetlb: change variable name reservations to resv (Herton R. Krzesinski) [1274599 1260755]
  - [fs] dcache: Log ELOOP rather than creating a loop (Benjamin Coddington) [1272858 1254020]
  - [fs] dcache: Fix loop checks in d_materialise_unique (Benjamin Coddington) [1272858 1254020]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.10.1.el6]
changelog:
  - [sound] Fix USB audio issues (wrong URB_ISO_ASAP semantics) (Jaroslav Kysela) [1273916 1255071]
  - [security] keys: Don't permit request_key() to construct a new keyring (David Howells) [1275927 1273463] {CVE-2015-7872}
  - [security] keys: Fix crash when attempt to garbage collect an uninstantiated keyring (David Howells) [1275927 1273463] {CVE-2015-7872}
  - [security] keys: Fix race between key destruction and finding a keyring by name (David Howells) [1275927 1273463] {CVE-2015-7872}
  - [ipc] Initialize msg/shm IPC objects before doing ipc_addid() (Stanislav Kozina) [1271504 1271505] {CVE-2015-7613}
  - [fs] vfs: Test for and handle paths that are unreachable from their mnt_root (Eric W. Biederman) [1209368 1209369] {CVE-2015-2925}
  - [fs] dcache: Handle escaped paths in prepend_path (Eric W. Biederman) [1209368 1209369] {CVE-2015-2925}
  - [netdrv] igb: add support for 1512 PHY (Stefan Assmann) [1278275 1238551]
  - [hid] fix unused rsize usage (Don Zickus) [1268203 1256568]
  - [hid] fix data access in implement() (Don Zickus) [1268203 1256568]
  - [fs] NFS: Hold i_lock in nfs_wb_page_cancel() while locking a request (Benjamin Coddington) [1273721 1135601]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.11.1.el6]
changelog:
  - [kvm] svm: unconditionally intercept DB (Paolo Bonzini) [1279467 1279468] {CVE-2015-8104}
  - [x86] virt: guest to host DoS by triggering an infinite loop in microcode (Paolo Bonzini) [1277557 1277559] {CVE-2015-5307}


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.13.1.el6]
changelog:
  - [security] Don't leak a key reference if request_key tries to use a revoked keyring (David Howells) [1288095 1188442]
  - [fs] gfs2: Protect freeing directory hash table with i_lock spin_lock (Robert S Peterson) [1288093 1250663]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.14.1.el6]
changelog:
  - [scsi] bfa: Fix incorrect de-reference of pointer (Chad Dupuis) [1292370 1258533]
  - [netdrv] genetlink-compat: register multicast groups (Stanislaw Gruszka) [1291978 1259870]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.16.1.el6]
changelog:
  - [net] bonding: propagate LRO disable to slave devices (Jarod Wilson) [1287993 1259008]
  - [net] Move bonding headers under include/net (Jarod Wilson) [1287993 1259008]


author: Frantisek Hrbata <fhrbata@redhat.com> [2.6.32-573.17.1.el6]
changelog:
  - [kernel] hrtimer: add force_hrtimer_reprogram kernel parameter (Prarit Bhargava) [1292082 1285142]
  - [mm] fix anon_vma->degree underflow in anon_vma endless growing prevention (Jerome Marchand) [1285693 1151823]
  - [mm] fix corner case in anon_vma endless growing prevention (Jerome Marchand) [1285693 1151823]
  - [mm] prevent endless growth of anon_vma hierarchy (Jerome Marchand) [1285693 1151823]
  - [mm] avoid anon_vma_chain allocation under anon_vma lock (Jerome Marchand) [1285693 1151823]
  - [mm] avoid repeated anon_vma lock/unlock sequences in unlink_anon_vmas() (Jerome Marchand) [1285693 1151823]
  - [mm] avoid repeated anon_vma lock/unlock sequences in anon_vma_clone() (Jerome Marchand) [1285693 1151823]
  - [scsi] only re-lock door after EH on devices that were reset (Ewan Milne) [1282464 995234]
  - [fs] fs: Unhash and evict unused children dentries after rmdir (Lukas Czerner) [1282621 1241030]
  - [fs] revert 'vfs: Unhash and evict unused children dentries after rmdir' (Carlos Maiolino) [1282621 1241030]
  - [netdrv] macvtap: fix network header pointer for VLAN tagged pkts (Ivan Vecera) [1280206 1213846]
  - [net] Fix vlan_get_protocol for stacked vlan (Ivan Vecera) [1280206 1213846]
  - [scsi] ipr: Fix incorrect trace indexing (Gustavo Duarte) [1280211 1209543]
  - [scsi] ipr: Fix invalid array indexing for HRRQ (Gustavo Duarte) [1280211 1209543]


author: Petr Holasek <pholasek@redhat.com> [2.6.32-573.18.1.el6]
changelog:
  - [netdrv] bonding: "primary_reselect" with "failure" is not working properly (Jarod Wilson) [1295924 1290672]
  - [net] netpoll: Close race condition between poll_one_napi and napi_disable (Neil Horman) [1295370 1252212]


author: Jeff Moyer <jmoyer@redhat.com> - 1.101-4
changelog:
  - Build for x86_64 as well.  Kdump support doesn't work there, but users
    should be able to use kexec.


author: Jeff Moyer <jmoyer@redhat.com> - 1.101-8
changelog:
  - Fix the service stop case.  It was previously unloading the wrong kernel.
  - Implement the "restart" function.
  - Add the "irqpoll" option as a default kdump kernel commandline parameter.
  - Create a default kernel command line in the sysconfig file upon rpm install.


author: Thomas Graf <tgraf@redhat.com> - 1.101-10
changelog:
  - kdump7.patch
     o Remove elf32 core headers support for x86_64
     o Fix x86 prepare elf core header routine
     o Fix ppc64 kexec -p failure for gcc 4.10
     o Fix few warnings for gcc 4.10
     o Add the missing --initrd option for ppc64
     o Fix ppc64 persistent root device bug
  - Remove --elf32-core-headers from default configuration, users
    may re-add it via KEXEC_ARGS.
  - Remove obsolete KEXEC_HEADERS


author: Thomas Graf <tgraf@redhat.com> - 1.101-15
changelog:
  - Don't add kdump service by default, let the user manually add it to
    avoid everyone seeing a warning.


author: Neil Horman <nhorman@redhat.com> - 1.101-45
changelog:
  - fixed typo in mkdumprd for bz 202983
  - fixed typo in mkdumprd for bz 203053
  - clarified docs in kdump.conf with examples per bz 203015


author: Jarod Wilson <jwilson@redhat.com> - 1.101-46
changelog:
  - ppc64 fixups:
    - actually build ppc64 binaries (bug 203407)
    - correct usage output
    - avoid segfault in command-line parsing
  - install kexec man page
  - use regulation Fedora BuildRoot


author: Neil Horman <nhorman@redhat.com> - 1.101-58
changelog:
  - Updating kdump.init and mkdumprd with most recent RHEL5 fixes
  - Fixing BuildReq to require elfutils-devel-static


author: Neil Horman <nhorman@redhat.com> - 1.102pre-1
changelog:
  - Bumping kexec version to latest horms tree (bz 257201)
  - Adding trigger to remove initrds when a kernel is removed


author: Neil Horman <nhorman@redhat.com> - 1.102pre-3
changelog:
  - Fix ARCH placement in kdump init script (bz 427201)
  - Fix BuildRequires
  - Fix Makedumpfile to build with new libelf


author: Neil Horman <nhorman@redhat.com> - 1.102pre-6
changelog:
  - Bringing rawhide up to date with bugfixes from RHEL5
  - Adding patch to prevent kexec buffer overflow on ppc (bz 428684)


author: Neil Horman <nhorman@redhat.com> 2.0.0-18
changelog:
  - Updated initscript to use mkdumprd2 if manifest is present
  - Updated spec to require dash
  - Updated sample manifest to point to correct initscript
  - Updated populate_std_files helper to fix sh symlink


author: Neil Horman <nhorman@redhat.com> -2.0.0-56
changelog:
  - Added utsname support to makedumpfile for 2.6.32 (bz 556356)
  - Cleaned up some syntax in the changelog


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-78
changelog:
  - Forward patches from RHEL5, Resolves: bz 592312  600566
    600571  600572 600574 600575 600577 600578 600579 600581 600583
    600584  600585 600586 600588 600590 600591 600593 600594 600595
    600596 600597  600598 600599 600600 600601 600602 600604 600605
    600606 600607 600610 600611 600613 600896 602785  602905.


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-86
changelog:
  - When there are double quotes in LABEL= in kdump.conf, findfs
    will not be able to find the correct label, we should allow
    quotes in LABEL= in kdump.conf because a label name may contain
    spaces. See comment #4 of bug 600611.


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-87
changelog:
  - We don't need to escape '#' with "\#", otherwise '#' will be
    executed as a command before aliased. See comment #4 of bug 600896.


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-92
changelog:
  - When there are multiple net dump targets, let the last one
    overwrite the previous ones, stop showing errors in this case.
    See comment #4 in bug 600607.


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-95
changelog:
  - Move modules from /lib into /lib/modules/`uname -r`, and
    regenerate modules.dep for them. Resolves bug 602033.


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-99
changelog:
  - Support btrfs, and move fs type check earlier so that
    mkdumprd will fail soon with unsupported fs type.
    Resolves bug 607515 and bug 607131.


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-102
changelog:
  - If a symlink with the same name exists, remove it first before
    copying, so that extra_bins will be copied correctly.
    Resolves bug 611699.


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-107
changelog:
  - Include the patch from Cai, adding missed options to --help
    of makedumpfile. Resolves bug 606704.


author: Amerigo Wang <amwang@redhat.com> - 2.0.0-197
changelog:
  - Add coordination between kdump and cluster fencing for long
    kernel panic dumps, resolve bug 585332. From Ryan O'Hara.


author: Dave Young <dyoung@redhat.com> - 2.0.0-227
changelog:
  - Fix the default dump failure option, resolve bug 729675.
  - Add default console font, resolve bug 784114.
  - Set pipefail at the beginning of init, resolve bug 771671.
  - Some bug fixes for raw dump, resolve bug 794981.


author: Dave Young <dyoung@redhat.com> - 2.0.0-229
changelog:
  - clarify "insufficient memory" in firstboot kdump module, resolve bug 799529 
  - mkdumprd: call add_rootfs early, resolve bug 799231
  - Do not depend on selinuxcoreutils, resolve bug 697657


author: Dave Young <dyoung@redhat.com> - 2.0.0-230
changelog:
  - Update firstboot threshold to 2G and roundup memsize value, resolve bug 802201
  - convert PREFIX to NETMASK for the second kernel, resolve bug 699318


author: Dave Young <dyoung@redhat.com> - 2.0.0-233
changelog:
  - Clarify the kdump.conf documentation, resolve bug 805793
  - uncomment the default core_collector and path, resolve bug 805793
  - fix module finding logic, resolve bug 794580


author: Dave Young <dyoung@redhat.com> - 2.0.0-236
changelog:
  - Warn when dumping to encrypted devices, resolve bug 743551
  - Correct the meaning of BOOTPROTO=none, resolve bug 805803


author: Dave Young <dyoung@redhat.com> - 2.0.0-242
changelog:
  - add s390x support in firstboot, resolve bug 805040
  - deal with s390x threshold in firstboot, resolve bug 805040


author: Dave Young <dyoung@redhat.com> - 2.0.0-246
changelog:
  - Do not run default/final action if network interface fails to come up, resolve bug 822146
  - Move default action handling code in a separate function, resolve bug 822146
  - Append to /etc/iface_to_active file instead of overwriting, resolve bug 822146
  - Allow activation of more than one network interface in second kernel, resolve bug 822146
  - always find and install the fs module for local fs dump, resolve bug 842476
  - document the supported fs types, resolve bug 813354


author: Dave Young <dyoung@redhat.com> - 2.0.0-248
changelog:
  - Exclude microcode kernel module, resolve bug 788253
  - Exclude virtio_balloon kernel module, resolve bug 770000


author: Dave Young <dyoung@redhat.com> - 2.0.0-249
changelog:
  - improve warning message for remain size checking, resolve bug 857282
  - propagate_ssh_key remove selinux flips for ssh key generation, resolve bug 816467
  - random feeding fix, resolve bug 825640
  - do not print error when there's no vendor-model-type, resolve bug 801344, bug 628610


author: Dave Young <dyoung@redhat.com> - 2.0.0-250
changelog:
  - mkdumprd: Support line mode terminals for s390x, resolve bug 818645
  - Fix kdump documentation about vmcore-dmesg handling, resolve bug 850623


author: Dave Young <dyoung@redhat.com> - 2.0.0-252
changelog:
  - remove hardcode for including ata_generic driver, resolve bug 820474
  - mkdumprd: Fix /dev/mapper/* links not being created by default, resolve bug 874832
  - vmcore-dmesg: Determine correct machine pointer size, resolve bug 871292


author: Dave Young <dyoung@redhat.com> - 2.0.0-254
changelog:
  - blacklist IB module mlx4_core.ko, resolve bug 876891
  - create bonding device dynamiclly, resolve bug 859824


author: Dave Young <dyoung@redhat.com> - 2.0.0-255
changelog:
  - make the SCSI dump target work with Linux on System z, resolve bug 870957
  - extract Linux on System z device init into separate functions, resolve bug 870957
  - remove hwclock calls for Linux on System z, resolve bug 821376


author: Baoquan He <bhe@redhat.com> - 2.0.0-259
changelog:
  - kexec-tools: Map network devices based on MAC address
  - kexec-tools: Allow mkdumprd modules blacklist to be overwritten by extra_modules
  - Add description about default action 'mount_root_run_init' and 'poweroff'
  - check_encrypted fix
  - add virtio disk identify logic
  - Add scsi_id disk identify logic
  - move scsi_id install to a function
  - move identify critical disk logic to a function


author: Baoquan He <bhe@redhat.com> - 2.0.0-260
changelog:
  - kexec-tools: powerpc: dt_reserve doesn't allocate enough memory for large properties
  - mkdumprd: check for empty dasd options
  - mkdumprd: Remove redundant code from handledm()


author: Baoquan He <bhe@redhat.com> - 2.0.0-261
changelog:
  - kexec: Respect memory limit while building crash memory ranges on ppc64, resolve bug 871522 
  - modprobe output awkscripts fix, resolve bug 876667 
  - kdump.init: exit and print error if kernel is old but using nr_cpus=1, resolve bug 844572
  - kdump.conf.5: the location of makedumpfile is said wrongly, resolve bug 847247
  - mkdumprd: remove redundant code of checkinging IS_UUID/IS_LABEL for lvm PV Name, resolve bug 879471
  - mkdumprd: handlelvordev cleanup, resolve bug 879471


author: Baoquan He <bhe@redhat.com> - 2.0.0-262
changelog:
  - kexec-tools: Allow kdump over a network work with an arbitrary bridge, bond or vlan name , resolve bug 959449
  - Add files related to fips support , resolve bug 909402
  - Change the old copy of symlink file , resolve bug 909402
  - kdump.conf: the location of makedumpfile is said wrongly , resolve bug 847247
  - Revert no-udev lvm.conf changes , resolve bug 888609


author: Baoquan He <bhe@redhat.com> - 2.0.0-263
changelog:
  - Add a help message into man page of makedumpfile for -b option, resolve bug 825476
  - makedumpfile: add a big patch to upgrade from v1.3.5 to v1.5.3, resolve bug 825476
  - add missing logs for makedumpfile patches, resolve bug 825476
  - RHEL6.4 PATCH Use conditional restart when adding or removing CPU/Memory, resolve bug 883543
  - mkdumprd: add tab key as delimiter of core_collector in kdump.conf, resolve bug 852373


author: Baoquan He <bhe@redhat.com> - 2.0.0-264
changelog:
  - kexec-tools.spec: turn on the dynamic and lzo build for makedumpfile, resolve bug 825476
  - kexec-tools.spec: Validate patches related to makedumpfile, resolve bug 825476


author: Baoquan He <bhe@redhat.com> - 2.0.0-265
changelog:
  - add selinux relabel when service startup, resolve bug 797231
  - add bzip2-devel and lzo-devel to BuildRequires, resolve bug 825476


author: Baoquan He <bhe@redhat.com> - 2.0.0-266
changelog:
  - kdump.conf.5: Modify 2 spelling errors
  - kexec-tools: Only remap network once when cluster configured
  - tools: Clean up /etc/iface_map after remapping the devices
  - kernel cmdline: Remove hugepage allocations
  - mkdumprd: change default disk_timeout to 180 seconds
  - kdump.conf: Tell user to specify module without ".ko" suffix
  - kdump.conf: add some missing supported configurations from kdump.conf.5
  - kdump.conf: change line columns to 80
  - Raw dump: use /sbin/blockdev to flush out block device buffers
  - Update translation file for firstboot
  - Update translation file for firstboot


author: Baoquan He <bhe@redhat.com> - 2.0.0-267
changelog:
  - mkdumprd: improve error message when e2fsprogs is missing, resolves bug 975642
  - mkdumprd: improve error message when btrfs-progs is missing, resolves bug 810494
  - Document mkdumprd option --allow-missing, resolves bug 951035


author: Baoquan He <bhe@redhat.com> - 2.0.0-269
changelog:
  - add snappy build, resolves bug 902147
  - This patch fixes the parsing of inline comments in config file, resolves bug 967427


author: Baoquan He <bhe@redhat.com> - 2.0.0-271
changelog:
  - makedumpfile: wrong cyclic buffer size recalculation causes bitmap data corruption, resolves bug 1009207


author: Baoquan He <bhe@redhat.com> - 2.0.0-272
changelog:
  - Allow multipathd to configure multipath map before adding partition devmappings, resolves bug 906601
  - mkdumprd: use timeout_count as a global variable, resolves bug 906601
  - mkdumprd: add support for SCM devices available for Linux on System z, resolves bug 903529
  - kdump.init: Run multiple kdump init instances one by one in serial order, resolves bug 963948


author: Baoquan He <bhe@redhat.com> - 2.0.0-273
changelog:
  - Fix max_mapnr issue on system has over 44-bit addressing, resolves bug 1008543
  - makedumpfile: fails phys_base calculation on sadump format, resolves bug 1010103


author: Baoquan He <bhe@redhat.com> - 2.0.0-274
changelog:
  - Add fence_kdump support for generic clusters, resolves bug 1083938
  - Add function setup_cluster_nodes_and_options, resolves bug 1083938
  - Add function get_pcs_cluster_nodes, resolves bug 1083938
  - Add function is_pcs_fence_kdump, resolves bug 1083938


author: Baoquan He <bhe@redhat.com> - 2.0.0-276
changelog:
  - kexec-tools: non-default routes are ignored by kdump, resolves bug 806992
  - kdumpctl: Pass disable_cpu_apicid to kexec of capture kernel, resolves bug 1061480
  - use -p option with fsck instead of -y, resolves bug 1055679
  - kdump doesn't work properly with nic that has "-" in it's name, resolves bug 874529
  - fix makedumpfile report and debug messages not shown, resolves bug 1016451


author: Baoquan He <bhe@redhat.com> - 2.0.0-277
changelog:
  - mkdumprd: add support for s390 DASD FBA type device, resolves bug 1022871
  - Check status of fsck before trying to mount a file system, resolves bug 1055672


author: Baoquan He <bhe@redhat.com> - 2.0.0-278
changelog:
  - Stop maximizing the bitmap buffer to reduce the risk of OOM, resolves bug 1114153
  - Move counting pfn_memhole for cyclic mode, resolves bug 1114153
  - Remove the 1st bitmap buffer from the ELF path in cyclic mode, resolves bug 1114153
  - Fix free bitmap_buffer_cyclic error, resolves bug 1114153
  - Introduce the mdf_pfn_t type, resolves bug 1114153


author: Baoquan He <bhe@redhat.com> - 2.0.0-279
changelog:
  - mkdurmpd: Issue sync after saving vmcore-dmesg.txt, resolves bug 1123061
  - mkdumprd: Fix check condition of selinux status, resolves bug 1122880
  - mkdumprd: fix no such file or directory warning in 2nd kernel on s390, resolves bug 1122883
  - Support for eppic language as a subpackage, resolves bug 823561
  - update .gitignore/sources for eppic_030413.tar.gz, resolves bug 823561
  - makedumpfile: Fix Makefile for eppic_makedumpfile.so build, resolves bug 823561


author: Baoquan He <bhe@redhat.com> - 2.0.0-280
changelog:
  - mkdumprd: wait for multipath device node, resolves bug 1128248
  - mkdumprd: clean up found logic in wait_for_multipath_devices(), resolves bug 1128248
  - use "getent ahostsv4 host-name" to get ipv4 address of a host name, resolves bug 1127138


author: Baoquan He <bhe@redaht.com> - 2.0.0-281
changelog:
  - starting kdump service after network, local fs and remote fs, resolves bug 1132300
  - Add sample eppic scripts to kexec-tools-eppic package, resolves bug 1104837
  - Convert leftover "getent hosts" to "getent ahostsv4", resolves bug 1142666
  - mkdurmpd: Fix the syntax error on the condition of fips inexistence, resolves bug 1131945


author: Baoquan He <bhe@redhat.com> - 2.0.0-283
changelog:
  - makedumpfile: Exclude unnecessary hugepages. resolves bug 1068674
  - makedumpfile: Vtop address translation support for vmalloc region in PPC64 arch. resolves bug 1068674
  - makedumpfile: Initialize for vmalloc address translation support in PPC64 arch. resolves bug 1068674
  - makedumpfile: Get rid of overrun adjustments. resolves bug 1068674
  - makedumpfile: Generic handling of multi-page exclusions. resolves bug 1068674


author: Baoquan He <bhe@redhat.com> - 2.0.0-286
changelog:
  - update kexec-kdump-howto.txt, resolves bug 949376
  - mkdumprd: Load the mlx4_core module if it is needed in the 2nd kernel, resolves bug 1099589
  - nfs dump will fail when netdev has different device name in ifcfg-$dev, resolves bug 1005141 
  - udev-rules: Restart kdump service on cpu ADD/REMOVE events, resolves bug 1113276


author: Tomas Smetana <tsmetana@redhat.com> 20070328-2
changelog:
  - fix wrong exit status of spawned process after SIGSTOP
  - fix building of debuginfo package, add %{?dist} to release
  - fix handling of SIGTTOU in non-interactive shell
  - remove useless builtins


author: Tomas Smetana <tsmetana@redhat.com> 20071105-2
changelog:
  - fix #405381 - ksh will not handle $(xxx) when typeset -r IFS
  - fix #386501 - bad group in spec file


author: Michal Hlavinka <mhlavink@redhat.com> 20081104-1
changelog:
  - update to 2008-11-04
  - ast-ksh-locales are not useable remove them
  - /usr/bin/ksh symlink was removed


author: Michal Hlavinka <mhlavink@redhat.com> - 20100202-6
changelog:
  - fix infinite loop when whence builtin is used with -q option (#587127)
  - fix stdin for double command substitution (#584704)


author: Michal Hlavinka <mhlavink@redhat.com> - 20100621-3
changelog:
  - fix file io race condition when file was created, but still does not exist (#660319)
  - use 'alternatives' for (m)ksh switching (#659658)
  - do not forget to restore file handles after execution of sourced script (#651888)
  - fix bug when here document got sometimes truncated (#644362)
  - do not forget to close autoloaded file with function definition (#643811)
  - fix wrong typeset handling of arrays that could caused a crash (#637052)
  - fix minor issues in man page (#619692)
  - fix crash when ksh get SIGPIPE while already executing signal handler (#616691)
  - fix wrong output redirection in SIGPIPE trap (#616684)
  - add RLIMIT_RTPRIO and RLIMIT_NICE support to ulimit (#582690)


author: Michal Hlavinka <mhlavink@redhat.com> - 20100621-7
changelog:
  - ksh did not wait for pipeline to complete when pipefail option was used (#702016)
  - completion used after an environment variable reported bad susbstituion error (#702015)
  - ksh child exit code not preserved correctly (#702013)
  - do not change $0 in posix function (#702011)
  - fix man page information about default value for PATH variable (#702008)
  - do not use invalid PID values in ksh kill built-in (#701890)
  - fix crashe when IFS is unset inside a function (#683734)
  - do not count empty array elements (#702014)


author: Michal Hlavinka <mhlavink@redhat.com> - 20100621-14
changelog:
  - fix data corruption in a here-document section of a script at byte 8192 (#786787)
  - restore tty settings after timed out read (#577223)
  - do not create extra process when it's not needed (#781976)
  - fix file descriptor leak (#781498)
  - do not segfault on incorrect oop code (#743840)


author: Michal Hlavinka <mhlavink@redhat.com> - 20100621-19
changelog:
  - assigning a right justified typedef'd variable to a smaller one
    could corrupt the result (#846678)
  - fix exporting of l/r-justified variable (#846678)


author: Michal Hlavinka <mhlavink@redhat.com> - 20120801-2
changelog:
  - fix overflow in subshell loop (#858263)
  - set default editing mode to emacs (#761551)
  - ksh -m did not turn monitor mode on (#960034)
  - prevent fork bomb trigered by SIGSTP (#922851)


author: Michal Hlavinka <mhlavink@redhat.com> - 20120801-14
changelog:
  - reading a file via command substitution did not work when any of stdin,
    stdout or stderr were closed (#1066589)


author: Michal Hlavinka <mhlavink@redhat.com> - 20120801-16
changelog:
  - do not resend signal on termination (#1075635)
  - fix argv rewrite (#1047506)
  - fix brace expansion on/off (#1078698)
  - fix incorrect rounding of numsers 0.5 < |x| <1.0 in printf (#1070350)
  - fix parser errors related to the end of the here-document marker (#1036931)
  - ksh hangs when command substitution fills out the pipe buffer (#1062296)
  - using typeset -l with a restricted variabled caused segmentation fault (#1083713)
  - ksh stopped on read when monitor mode was enabled (#1023109)
  - monitor mode was documented incorrectly (#1019334)


author: Michal Hlavinka <mhlavink@redhat.com> - 20120801-17
changelog:
  - do not crash when unsetting running function from another one (#1105138)
  - should report an error when trying to cd into directory without execution bit (#1102627)


author: Michal Hlavinka <mhlavink@redhat.com> - 20120801-18
changelog:
  - job locking mechanism did not survive compiler optimization (#1112306)
  - wrong return code from a pipe in command substitution (#1117316)


author: Michal Hlavinka <mhlavink@redhat.com> - 20120801-24
changelog:
  - cd to directory without execution permission can't fail silently (#1160923)
  - current directory could differ from PWD (#1168611)
  - declaration of a two dimemsional associatve array could add an extra 0 element (#1173668)
  - exporting fixed with variable corrupted its data (#1188377)
  - fixes memmory leak on unset of associative array (#1189294)


author: Michal Hlavinka <mhlavink@redhat.com> - 20120801-26
changelog:
  - fix segfault when handling a trap (#1117404)
  - closing a file descriptor in a command substitution caused loss of the output (#1116072)


author: Mike A. Harris <mharris@redhat.com> 0.99.0-2
changelog:
  - Renamed package to prepend "xorg-x11" to the name for consistency with
    the rest of the X11R7 packages.
  - Added "Requires: %{name} = %{version}-%{release}" dependency to devel
    subpackage to ensure the devel package matches the installed shared libs.
  - Added virtual "Provides: lib<name>" and "Provides: lib<name>-devel" to
    allow applications to use implementation agnostic dependencies.
  - Added post/postun scripts which call ldconfig.
  - Added Conflicts with XFree86-libs and xorg-x11-libs to runtime package,
    and Conflicts with XFree86-devel and xorg-x11-devel to devel package.


author: Mike A. Harris <mharris@redhat.com> 0.99.0-3
changelog:
  - Changed all virtual BuildRequires to the "xorg-x11-" prefixed non-virtual
    package names, as we want xorg-x11 libs to explicitly build against
    X.Org supplied libs, rather than "any implementation", which is what the
    virtual provides is intended for.
  - Added freetype-devel build dependency


author: Mike A. Harris <mharris@redhat.com> 0.99.0-4
changelog:
  - Added xorg-x11-proto-devel dependency to 'devel' subpackage, because the
    libXfont headers use some of the protocol headers, but the autotooling of
    libXfont doesn't autodetect this yet.  Discovered when bdftopcf failed to
    compile while trying to package xorg-x11-font-utils, even though libXfont
    headers were installed.


author: Mike A. Harris <mharris@redhat.com> 0.99.0-5
changelog:
  - Renamed package to remove xorg-x11 from the name due to unanimous decision
    between developers.
  - Use Fedora Extras style BuildRoot tag.
  - Disable static library creation by default.
  - Add missing defattr to devel subpackage
  - Add missing documentation files to doc macro
  - Fix BuildRequires to use new libX* style package names


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Updated libXfont to version 0.99.1 from X11R7 RC1
  - Remove libfontcache* from file manifests, as it is static linked into Xfont


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libXfont to version 0.99.2 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Mike A. Harris <mharris@redhat.com> 0.99.2-3
changelog:
  - Added libXfont-0.99.2-fontdir-attrib-fix-bug-172997.patch to remove
    conditionalization of FONTDIRATTRIB from sources instead of tweaking
    CFLAGS for bug (#172997, fdo#5047).


author: Mike A. Harris <mharris@redhat.com> 0.99.3-1
changelog:
  - Updated libXfont to version 0.99.3 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.
  - Removed libXfont-0.99.2-fontdir-attrib-fix-bug-172997.patch, which is now
    integrated upstream.


author: Adam Jackson <ajax@redhat.com> 1.2.3-2.fc7
changelog:
  - libXfont-1.2.3-namespace-pollution.patch: Hide some symbols from the dynamic
    linker to avoid colliding with other libs.


author: Adam Jackson <ajax@redhat.com> 1.3.3-1
changelog:
  - libXfont 1.3.3.
  - libXfont-1.3.1-fast-retry.patch: Retry font server connections faster.
    (#443070)


author: Soren Sandmann <ssp@redhat.com> 1.4.5-3
changelog:
  - cve-2013-6462.patch: sscanf overflow (bug 1049684)
  - sscanf-hardening.patch: Some other sscanf hardening fixes (1049684)


author: Benjamin Tissoires <btissoir@redhat.com> 1.4.5-4
changelog:
  - CVE-2014-0209: integer overflow of allocations in font metadata file parsing (bug 1163602, bug 1163601)
  - CVE-2014-0210: unvalidated length fields when parsing xfs protocol replies (bug 1163602, bug 1163601)
  - CVE-2014-0211: integer overflows calculating memory needs for xfs replies (bug 1163602, bug 1163601)


author: Benjamin Tissoires <benjamin.tissoires@redhat.com> 1.4.5-5
changelog:
  - CVE-2015-1802: missing range check in bdfReadProperties (bug 1258892)
  - CVE-2015-1803: crash on invalid read in bdfReadCharacters (bug 1258892)
  - CVE-2015-1804: out-of-bounds memory access in bdfReadCharacters (bug 1258892)


author: Christophe Fergeau <cfergeau@redhat.com> 0.0.3-2
changelog:
  - Removed definition of BuildRoot and cleanup of BuildRoot in %clean
  - Added missing arch to versioned Requires: %{name} in the -devel package
  - Don't include empty NEWS and ChangeLog in built RPM


author: Christophe Fergeau <cfergeau@redhat.com> 0.3.1-2
changelog:
  - Requires a new enough librest as we use symbols not available in older
    librest
    Related: rhbz#1116844


author: Christophe Fergeau <cfergeau@redhat.com> 0.3.2-1.2
changelog:
  - Access oVirt API through /ovirt-engine/api rather than /api, this fixes
    foreign menu when accessing a VM from .vv files
    Resolves: rhbz#1297810


author: Stephen Gallagher <sgallagh@redhat.com> - 0.9.22-8
changelog:
  - Fixes from package review
  - Change Requires: on tools subpackage to be the exact version/release
  - Remove unnecessary BuildRoot directive


author: Stephen Gallagher <sgallagh@redhat.com> - 1.0.0-1
changelog:
  - New upstream release 1.0.0
  - SOname bump to account for module loading changes
  - Rename libldb-tools to ldb-tools to make upgrades easier


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.3-2
changelog:
  - Build and install API documentation
  - Build tdb_compat and ccan statically. They have no upstream releases to
    link against yet and their API is in flux. It is unsafe to make them
    public and shared at this time.


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.3-3
changelog:
  - Add explicit mention of the bundled libreplace
  - https://fedorahosted.org/fpc/ticket/120
  - Add explicit mention of bundled libtdb_compat and libccan
  - https://fedorahosted.org/fpc/ticket/119


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.4-1
changelog:
  - New upstream release
  - Add ldb_module_error() routine
  - Fedora: work around unreliable configure check for pytevent
  - Drop patch to ignore --disable-silent-rules (included in tarball)


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.6-1
changelog:
  - New upstream release 1.1.6
  - Drop upstream patches
  - Required for upcoming Samba 4 beta
  - Explicitly build with tdb1 support


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.8-1
changelog:
  - New upstream release 1.1.8
  - Required for latest Samba 4 beta
  - Fixes for pyldb
  - Revert to using tdb1 by default
  - Drop support for tdb_compat
  - CCAN is no longer built as a static library


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.9-1
changelog:
  - New upstream release 1.1.9
  - Required for Samba 4 Beta 5
  - Ensure rename target does not exist before deleting old record
  - Add parameter to avoid NULL format string flagged by -Werror=format


author: Jakub Hrozek <jhrozek@redhat.com> - 1.1.13-3
changelog:
  - use the proper %patch stanza to make rpmdiff happy
  - related: rhbz#873422 - LDB 1.1.13 exports improper ABI


author: Jakub Hrozek <jhrozek@redhat.com> - 1.1.13-3.1
changelog:
  - Resolves: rhbz#1290712 - CVE-2015-5330 libldb: samba: Remote memory read
                             in Samba LDAP server [rhel-7.2.z]
  - Remove the patch from the previous commit, it doesn't fix a remotely
    eploitable issue. Add patches from upstream #11636 instead.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - we are Serial: 1 now because we are reverting the 1.0.2 version from 5.2
    beta to this prior one
  - install man pages; set defattr defaults


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Work around a problem causing konqueror to segfault in image preview
    mode (Bug #20018)
  - Copy SuSE 7.0's patch to handle bad chunks


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Remove the workaround for Bug #20018 (from Oct 30).
    Qt 2.2.2 fixes the problem the workaround addressed.


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - s/Copyright/License/
  - fix weird versioning system (epoch was set to "2" in the main
    package, serial to "1" in the devel package. Huh?)


author: Matthias Clasen <mclasen@redhat.com> - 2:1.2.5-3
changelog:
  - Reinstate and improve the transfix patch which got lost sometime ago, 
    but is still needed for CAN-2002-1363 (#125934)


author: Matthias Clasen <mclasen@redhat.com> 2:1.2.5-7
changelog:
  - Replace the patches for individual security problems with the
    cumulative patch issued by the png developers. 
  - Build for FC1


author: Tom Lane <tgl@redhat.com> 2:1.2.16-1
changelog:
  - Update to libpng 1.2.16
  Resolves: #211705, #216706, #227334
  - Separate libpng.a into a -static subpackage
  - Other minor packaging fixes per Fedora merge review
  Resolves: #226038


author: Tom Lane <tgl@redhat.com> 2:1.2.46-1
changelog:
  - Update to libpng 1.2.46, includes fixes for CVE-2011-2501, CVE-2011-2690,
    CVE-2011-2691, CVE-2011-2692
  Resolves: #721306


author: Roland Dreier <rdreier@cisco.com> - 1.0.6-2
changelog:
  - Spec file cleanups from Fedora review: add BuildRequires for
    libibverbs, and move the static library to -static.


author: Doug Ledford <dledford@redhat.com> - 1.0.15-1
changelog:
  - Update to latest upstream release (adds FDR support and fixes 696019 the
    upstream way)
  - Include fixes in git not yet in a release
  - Related: bz750609
  - Resolves: bz700289


author: Doug Ledford <dledford@redhat.com> - 1.0.17-0.git4b5c1aa
changelog:
  - Pre-release version of 1.0.17
  - Resolves a CVE vulnerability between librdmacm and ibacm
  - Fixes various minor bugs in sample programs
  - Resolves: bz866221, bz816074


author: Doug Ledford <dledford@redhat.com> - 1.0.17-1
changelog:
  - Official 1.0.17 release
  - The fix to bug 866221 got kicked back as incomplete last time, fix
    it for real this time.
  - Intel adapters that use the qib driver don't like using inline data,
    so use a memory region that is registered instead
  - Resolves: bz866221, bz828071


author: Doug Ledford <dledford@redhat.com> - 1.0.19.1-1
changelog:
  - Update to latest upstream release
  - Drop patches that upstream has folded in
  - Resolves: bz1119108


author: Caolán McNamara <caolanm@redhat.com> - 3.4.5.2-8
changelog:
  - Resolves: rhbz#798983 Kannada langpack missing
  - Resolves: rhbz#798926 fix endianess assumptions of lotuswordpro filter
  - Resolves: rhbz#800272 complain about unknown commandline options


author: Caolán McNamara <caolanm@redhat.com> - 3.4.5.2-12
changelog:
  - Resolves: rhbz#810267 better CSV import default separators
  - Resolves: rhbz#807392 focus problems and tearable menus


author: Caolán McNamara <caolanm@redhat.com> - 3.4.5.2-13
changelog:
  - Resolves: rhbz#809466 libreoffice-core (unintentionally) provides
    libraptor.so.1()() and librdf.so.0()()


author: Stephan Bergmann <sbergman@redhat.com> - 3.4.5.2-18
changelog:
  - Resolves: rhbz#820554 Java functionality broken with gcj
  - Resolves: rhbz#855972 crash on switching to outline view
  - Resolves: rhbz#863052 ZipIOException in MSOffice 2010 msxml
  - Resolves: rhbz#902694 inaccessibile CJK/Indic shortcuts
  - Resolves: rhbz#833512 missing some backwards compat launchers
  - Resolves: rhbz#876742 manipulation with larger tables in impress is very slow
  - Resolves: rhbz#841812 accept empty string as scalar numeric 0
  - Resolves: rhbz#847519 do not access vector elements beyond size
  - Resolves: rhbz#865058 retard overflow of internal table of number formats
  - Resolves: rhbz#871462 remove testdocs that trigger anti-virus software


author: Caolán McNamara <caolanm@redhat.com> - 1:4.0.4.2-3
changelog:
  - Resolves: rhbz#833512 provide a /usr/bin/openoffice.org-1.9 for backwards compat
  - Resolves: rhbz#902694 inaccessibile CJK/Indic shortcuts


author: David Tardon <dtardon@redhat.com> - 1:4.0.4.2-10
changelog:
  - Resolves: rhbz#1012379 sound file included in presentation displayed
    as a gray sqaure
  - Resolves: rhbz#1012390 CRITICAL **: AtkObject* atk_object_wrapper_ref
  - Resolves: rhbz#1038189 libreoffice does not recognize new printer
  - Resolves: rhbz#1085420 LO incorrectly provides liblcms2.so.2
  - Resolves: rhbz#1065629 RTF import probable regression with non-english
    BigMachines exports
  - Resolves: rhbz#1020712 No Default Font showing when write in text
    boxes at first, behaving unusual
  - Resolves: rhbz#1021915 Menu drop-down list overlapping with other menu
    items
  - Resolves: rhbz#1035298 Transaction check errors due to file conflicts
  - Related: rhbz#1035298 provide non-arch variants of openoffice.org
    provides too


author: Caolán McNamara <caolanm@redhat.com> - 1:4.0.4.2-14
changelog:
  - Resolves: rhbz#1130264 crash in gstreamer callback on s390x
  - Resolves: rhbz#1131428 cannot export charts as svg
  - Resolves: rhbz#1035298 obsolete openoffice.org-langpack-ms_MY


author: David Tardon <dtardon@redhat.com> - 1:4.2.8.2-11
changelog:
  - Resolves: rhbz#1223696 some labels in print dialog are not translated, even
    though the translations exist


author: David Tardon <dtardon@redhat.com> - 1:4.2.8.2-11.1
changelog:
  - Resolves: rhbz#1285818 various flaws
  - CVE-2015-4551 Arbitrary file disclosure in Calc and Writer
  - CVE-2015-5212 Integer underflow in PrinterSetup length
  - CVE-2015-5213 Integer overflow in DOC files
  - CVE-2015-5214 Bookmarks in DOC documents are insufficiently checked
    causing memory corruption


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.5-1
changelog:
  - move reporter plugins from abrt to libreport
  - fixed provides/obsolete to properly obsolete report package
  - wizard: make more fields editable
  - Related: #697494


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.5-2
changelog:
  - removed mailx from possible reporter list (still enabled as post-create event)
  - added python bindings to libreport client lib
  - honor reporters minimal rating
  - fixed (null) in bz summary
  - Related: #714045


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.5-3
changelog:
  - improved compatibility with bugzilla
  - enabled bugzilla for libreport reports (analyzer=libreport)
  - Resolves: #725857


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.5-4
changelog:
  - further improvement in Anaconda compatibility rhbz#727243
  - warn silently when keyring is not available rhbz#725858
  - Resolves: #727243 #725858


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.5-5
changelog:
  - added the report cmdline tool rhbz#725660
  - fixed man pages version rhbz#728190
  - fixed text wrapping rhbz#728132
  - improved dump_dir detection rhbz#728166
  - fixed reporting from Anaconda newt ui rhbz#729566
  - added defualt config file for rhtsupport rhbz#729566
  - make reporters use default conf when -c is not used rhbz#729986
  - Resolves: #725660 #728190 #728132 #728166 #729566 #729986


author: Karel Klíč <kklic@redhat.com> - 2.0.5-6
changelog:
  - Added two patches (libreport-code-was-moved-to-abrt.git,
    libreport-fix-d-delete-option) from upstream making report-cli
    -d/--delete to remove DUMP_DIR after reporting. First patch also
    removes --list and --info and --full options, which were already
    moved to abrt-cli.
    Resolves: #726097
  - Added fallback text editor for editing multiline fields in Anaconda
    Resolves: #728479


author: Denys Vlasenko <dvlasenk@redhat.com> - 2.0.5-7
changelog:
  - Fix report-cli crash if config files are missing.
    Resolves: #730942
  - Pull in libreport-plugin-reportuploader on update
    (fixes a problem with "yum update" on RHEL system with old report package.
    Resolves: #732683


author: Nikola Pajkovsky <npajkovs@redhat.com> - 2.0.5-8
changelog:
  - Missing man pages of report and report.conf
    Resolves: #729957
  - Update translations
    Resolves: #731037


author: Jiri Moskovcak <jmoskovc@redhat.com> - 2.0.5-9
changelog:
  - fixed make check rhbz#729686
  - fixed attaching anaconda-tb* rhbz#731389
  - Resolves: #729686 #731389


author: Jiri Moskovcak <jmoskovc@redhat.com> - 2.0.5-11
changelog:
  - disabled bugzilla rhbz#739936
  - own /etc/libreport/plugins/ rhbz#744782
  - removed unused patches to make rpmdiff happy
  - updated translation
  - Resolves: #739936 #744782


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.5-12
changelog:
  - updated translation rhbz#731037
  - search kbase before creating the ticket rhbz#743198
  - Resolves: #731037 #743198


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.5-15
changelog:
  - fix the kbase searching rhbz#743198
  - updated translation Related: #731037
  - Resolves: #743198 #731037


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-1
changelog:
  - new upstream release
  - fixed typos in man
  - fixed handling of anaconda-tb file
  - generate valid xml file
  - Resolves: #759377, #758366, #746727


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-6
changelog:
  - opt kernel out of showing smolt information in abrt bug reports. rhbz#795548
  - ABRT mailx plugin on by default causes crashes being always labelled as reported rhbz#803618
  - pkg-config --cflags libreport includs -fPIC rhbz#803736
  - Coverity revealed memory leaks and possibly other issues rhbz#809416
  - GLib warnings by report-gtk when crash dir does not exist rhbz#813283
  - `report' tool requires current working directory to be a crash dir rhbz#817051
  - Searching for duplicate anaconda bugs while reporting exception against partner-bugzilla during install fails rhbz#820985
  - Undefined non-weak symbols rhbz#826745
  - ABRT has wrong URL in dialog
  Resolves: #809416,#813283,#817051,#826745,#820985,#795548,#803618,#803736


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-7
changelog:
  - don't warn about daemon connection when deleting a problem rhbz#799909
  - ignore non problem dirs when cleaning old problems rhbz#847291
  - Resolves: #799909, #847291


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-8
changelog:
  - use the default template for bz reports rhbz#747410
  - fix adding users to CC in bugzilla rhbz#841338
  - Resolves: #747410, #841338


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-10
changelog:
  - updated translation rhbz#864025
  - fixed brewtap warnings rhbz#812283
  - silence few rpmdiff warnings rhbz#857425
  - Resolves: #864025, #812283, #857425


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-12
changelog:
  - fixed relro flags
  - removed confusing warning message
  - added versioned requirements to silence rpmdiff
  - Resolved: #847291, #812283, #857425


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-16
changelog:
  - ABRT won't install debuginfos from rhn repository rhbz#759443
  - Brewtap reports LibMissingRELRO rhbz#812283
  - libreport attached sosreport into bugzilla with bad mimetype rhbz#885509
  - reporter-rhtsupport on RHEL6.4 unable to open cases in RHT customer center rhbz#896090
  - Change default set of reporters shown by CLI/GUI rhbz#948286
  - [RFE] add the console notification to RHEL6 rhbz#961231
  - Resolves: #885509, #812283, #961231, #961231, #961231, #948286, #759443, #896090, #875260


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-17
changelog:
  - updated translation rhbz#993626
  - fixed bugs doscovered by coverity rhbz#905051
  - Resolves: #993626, #905051


author: Jiri Moskovcak <jmoskovc@redhat.com> 2.0.9-19
changelog:
  - updated transaltion (ko) rhbz#993626
  - fixed bugzilla reporter to work with the new xmlrpc api rhbz#991088
  - Resolves: #991088, #993626


author: Jakub Filak <jfilak@redhat.com> - 2.0.9-20
changelog:
  - Bugzilla: pass Bugzilla_token in all XML RPC calls
  - mailx: improve notification e-mail headers
  - mailx: include hostane in notification e-mail
  - Resolves: #989530, #997871, #1090466, #1093375


author: Jakub Filak <jfilak@redhat.com> - 2.0.9-23
changelog:
  - resolve symbolic and hard link vulnerabilities
  - defend against directory traversal attack
  - Resolves: #1212095


author: Jakub Filak <jfilak@redhat.com> - 2.0.9-24
changelog:
  - switch ownership of new directories from "abrt:user" to "user:abrt"
  - fix a bug allowing libreport to read files outside dump directories
  - Related: #1212095


author: Jakub Filak <jfilak@redhat.com> - 2.0.9-25
changelog:
  - save all files changed by the reporter in the reporting GUI
  - Fixes CVE-2015-5302
  - Resolves: #1282143


author: Nalin Dahyabhai <nalin@redhat.com> 0.7
changelog:
  - add openldap-devel as a buildprereq
  - krb5: use a continuous connection
  - krb5: add "realm" config directive
  - ldap: use a continuous connection
  - ldap: add "server", "basedn", "binddn", "user", "authuser" config directives
  - ldap: actually finish the account deletion function
  - ldap: don't send cleartext passwords to the directory
  - fix naming attribute for users (should be uid, not gid)
  - refine the search-by-id,convert-to-name,search-by-name logic
  - fix handling of defaults when the config file is read in but contains no value
  - implement an LDAP information store
  - try to clean up module naming with libtool
  - luseradd: pass plaintext passwords along
  - luseradd: use symbolic attribute names instead of hard-coded
  - lusermod: pass plaintext passwords along
  - lgroupadd: pass plaintext passwords along
  - lgroupmod: pass plaintext passwords along
  - add libuser as a dependency of libuser-devel


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - the great adding-of-the-copyright-statements
  - take more care when creating backup files in the files module


author: Nalin Dahyabhai <nalin@redhat.com> 0.8
changelog:
  - add a "quiet" prompter
  - add --interactive flag to sample apps and default to using quiet prompter
  - ldap: attempt a "self" bind if other attempts fail
  - krb5: connect to the password-changing service if the user principal has
    the NULL instance


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add functions for enumerating users and groups, optionally per-module
  - lusermod.c: -s should specify the shell, not the home directory


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - get bindings for prompts to work correctly
  - clean up some of the add/remove semantics (set source on add)
  - ldap: implement enumeration
  - samples/enum: fix the argument order


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - clean up quota bindings some more
  - finish most of the ldap bindings
  - fix a subtle bug in the files module that would show up when renaming accounts
  - fix mapping methods for entity structures in python


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - finish implementing is_locked methods in files/shadow module
  - finish cleanup of the python bindings
  - allow conditional builds of modules so that we can build without
    all of the prereqs for all of the modules


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't bail when writing empty fields to colon-delimited files
  - use permissions of the original file when making backup files instead of 0600


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix errors due to uninitialized fields in the python bindings
  - add kwargs support to all python wrappers
  - add a mechanism for passing arguments to python callbacks


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix group password setting in the files module
  - setpass affects both auth and info, so run both stacks


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - lib/user.c: catch and ignore errors when running stacks
  - lusermod: fix slightly bogus help messages
  - luseradd: when adding a user and group, use the gid of the group
    instead of the user's uid as the primary group
  - properly set the password field in user accounts created using
    auth-only auth modules (shadow needs "x" instead of "!!")
  - implement home directory removal, start on population


author: Nalin Dahyabhai <nalin@redhat.com> 0.16.1-1
changelog:
  - finish home directory population
  - implement home directory moving
  - change entity get semantics in the python bindings to allow default values for .get()
  - add lu_ent_has(), and a python has_key() method to Entity types
  - don't include tools in the binary package
  - add translated strings


author: Nalin Dahyabhai <nalin@redhat.com> 0.18-1
changelog:
  - actually make the new optional arguments optional
  - fix lu_error_new() to actually report errors right
  - fix part of the python bindings
  - include tools in the binary package again
  - fixup modules so that password-changing works right again
  - add a "key" field to prompt structures for use by apps which like to
    cache these things
  - add an optional "mvhomedir" argument to userModify (python)


author: Nalin Dahyabhai <nalin@redhat.com> 0.20-1
changelog:
  - only call the auth module when setting passwords (oops)
  - use GTrees instead of GHashTables for most internal tables
  - files: complain properly about unset attributes
  - files: group passwords are single-valued, not multiple-valued
  - add lpasswd app, make sure all apps start up popt with the right names


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - luserdel: remove the user's primary group if it has the same name as
    the user and has no members configured (-G disables)
  - fixup some configure stuff to make libuser.conf get generated correctly
    even when execprefix isn't specified


author: Nalin Dahyabhai <nalin@redhat.com> 0.21-1
changelog:
  - finish adding a sasldb module which manipulates a sasldb file
  - add users_enumerate_by_group and groups_enumerate_by_users


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - print uids and gids of users and names in lid app
  - fix tree traversal in users_enumerate_by_group and groups_enumerate_by_users
  - implement enumerate_by_group and enumerate_by_user in ldap module
  - fix id-based lookups in the ldap module
  - implement islocked() method in ldap module
  - implement setpass() method in ldap module
  - add lchfn and lchsh apps
  - add %d substitution to libuser.conf


author: Nalin Dahyabhai <nalin@redhat.com> 0.23-1
changelog:
  - install sv translation
  - make lpasswd prompt for passwords when none are given on the command line
  - make sure all user-visible strings are marked for translation
  - clean up some user-visible strings
  - require PAM authentication in lchsh, lchfn, and lpasswd for non-networked modules


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-3
changelog:
  - stop leaking descriptors in the files module
  - speed up user creation by reordering some checks for IDs being in use
  - update the shadowLastChanged attribute when we set a password
  - adjust usage of getXXXXX_r where needed
  - fix assorted bugs in python binding which break prompting


author: Nalin Dahyabhai <nalin@redhat.com> 0.25-1
changelog:
  - close up some memory leaks
  - add the ability to include resident versions of modules in the library


author: Nalin Dahyabhai <nalin@redhat.com> 0.25.1-1
changelog:
  - rename the quota source files to match the library, which clears up a
    file conflict with older quota packages
  - add ja translation files


author: Nalin Dahyabhai <nalin@redhat.com> 0.26-1
changelog:
  - lusermod: change user name in groups the user is a member of during renames
  - lgroupmod: change primary GID for users who are in the group during renumbers
  - ldap.c: handle new attributes more gracefully if possible
  - add ru translation files


author: Nalin Dahyabhai <nalin@redhat.com> 0.27-1
changelog:
  - add ko translation files
  - files.c: fix a heap corruption bug in lock/unlock (#51750)
  - files.c: close a memory leak in reading of files


author: Nalin Dahyabhai <nalin@redhat.com> 0.28-1
changelog:
  - apps: print usage on errors
  - lnewusers.c: initialize groups as groups, not users
  - lnewusers.c: set passwords for new accounts
  - luseradd.c: accept group names in addition to IDs for the -g flag
  - luseradd.c: allow the primary GID to be a preexisting group


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - HUP nscd on modifications
  - userutil.c: mmap files we're reading for probable speed gain
  - userutil.c: be conservative with the amount of random data we read
  - docs fixes


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-1
changelog:
  - quotaq: fix argument order when reading quota information
  - user_quota: set quota grace periods correctly
  - luseradd: never create home directories for system accounts


author: Nalin Dahyabhai <nalin@redhat.com> 0.32-1
changelog:
  - link the python module against libpam
  - attempt to import the python modules at build-time to verify dependencies


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - renamed the python module
  - revamped internals to use gobject's gvalues and gvaluearrays instead of
    glists of cached strings
  - add enumeration-with-data functions to the C library


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.91-1
changelog:
  - ldap: finish port to new API
  - sasl: finish port to new API (needs test)
  - libuser: don't commit object changes before passing data to service
    functions which might need differing data sets to figure out what to
    change (for example, ldap)


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.93-1
changelog:
  - move shadow initialization for groups to the proper callback
  - rework locking in the files module to not require that files be writable


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.97-1
changelog:
  - files: fix bug in removals
  - ldap: revert attempts at being smart at startup time, because it makes UIs
    very messy (up the three whole dialogs just to start the ldap stuff!)


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.98-1
changelog:
  - automatically refresh entities after add, modify, setpass, removepass,
    lock, and unlock operations
  - remove debug spewage when creating and removing mail spools
  - files: fix saving of multi-valued attributes
  - rename MEMBERUID attribute for groups to MEMBERNAME


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.100-1
changelog:
  - be more careful about printing error messages
  - fix refreshing after adding of accounts
  - ldap: try to use a search to convert names to DNs, and only fall back to
    guessing if it turns up nothing
  - files: fix an off-by-one in removal of entries


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.101-1
changelog:
  - fix python bindings of enumerateFull functions
  - adjust prompter wrapping to not error out on successful returns


author: Nalin Dahyabhai <nalin@redhat.com> 0.51-1
changelog:
  - files: ignore blank lines in files
  - libuser: disallow creation of accounts with names containing whitespace,
    control characters, or non-ASCII characters


author: Nalin Dahyabhai <nalin@redhat.com> 0.51.5-1
changelog:
  - expose lu_get_first_unused_id() as a package-private function
  - provide libuser.ADMIN.getFirstUnusedUid and libuser.ADMIN.getFirstUnusedGid
    in python


author: Nalin Dahyabhai <nalin@redhat.com> 0.51.6-1
changelog:
  - use a crypt salt consistent with the defaults/crypt_style setting when
    setting new passwords (#79337)


author: Nalin Dahyabhai <nalin@redhat.com> 0.51.7-1
changelog:
  - ldap: set error codes correctly when we encounter failures initializing
  - don't double-close modules which fail initialization
  - ldap: don't set an error in cases where one is already set


author: Miloslav Trmac <mitr@redhat.com> - 0.51.8-1
changelog:
  - Update to build with latest autotools and gtk-doc
  - Update ALL_LINGUAS and POTFILES.in
  - Rebuild to depend on newer openldap


author: Miloslav Trmac <mitr@redhat.com> - 0.51.10-1
changelog:
  - Don't attempt to lookup using original entity name after entity
    modification (rename in particular) (#78376, #121252)
  - Fix copying of symlinks from /etc/skel (#87572, original patch from gLaNDix)
  - Make --enable-quota work, and fix the quota code to at least compile (#89114)
  - Fix several bugs (#120168, original patch from Steve Grubb)
  - Don't hardcode python version in spec file (#130952, from Robert Scheck)
  - Properly integrate the SELinux patch, it should actually be used now, even
    though it was "enabled" since 0.51.7-6


author: Miloslav Trmac <mitr@redhat.com> - 0.51.11-1
changelog:
  - Allow documented optional arguments in Python
    ADMIN.{addUser,modifyUser,deleteUser} (#119812)
  - Add man pages for lchfn and lchsh
  - LDAP fixes, first round
  - Avoid file conflict on multilib systems
  - Call ldconfig correctly


author: Miloslav Trmac <mitr@redhat.com> - 0.51.12-1
changelog:
  - Don't claim success and exception at the same time (#133479)
  - LDAP fixes, second round
  - Various other bugfixes


author: Miloslav Trmac <mitr@redhat.com> - 0.52.2-1
changelog:
  - Allow LDAP connection using ldaps, custom ports or without TLS (original
    patch from Pawel Salek).


author: Miloslav Trmac <mitr@redhat.com> - 0.52.5-1
changelog:
  - Fix home directory renaming in ADMIN.modifyUser (#135280)
  - Further Python reference counting fixes


author: Miloslav Trmac <mitr@redhat.com> - 0.52.6-1
changelog:
  - Make error reporting more consistent, more verbose and always on stderr
    (partly #133861, original patch by Pawel Salek)
  - Mark strings previously blocked by string freeze for translation


author: Miloslav Trmac <mitr@redhat.com> - 0.53-1
changelog:
  - Support UID and GID values larger than LONG_MAX (#124967)
  - Fix updating of groups after user renaming in lusermod
  - Allow setting a shadow password even if the current shadow password is
    invalid (#131180)
  - Add lu_{user,group}_unlock_nonempty (#86414); module interface ABI has 
    changed
  - Miscellaneous bug and memory leak fixes


author: Miloslav Trmac <mitr@redhat.com> - 0.53.2-1
changelog:
  - Important bug fixes in lchage, lgroupmod, lnewusers and lusermod
  - Minor bug fixes in lpasswd and luseradd
  - Add man pages for the utilities (#61673)


author: Miloslav Trmac <mitr@redhat.com> - 0.53.3-1
changelog:
  - Don't silently ignore some I/O errors
  - Don't include a Cyrus SASL v1 header file when libldap links to v2 (#150046)
  - Rebuild with gcc 4


author: Miloslav Trmac <mitr@redhat.com> - 0.53.3-2
changelog:
  - Add Requires: glib2-devel to libuser-devel (#152501)
  - Run ldconfig using %post{,un} -p to let RPM play tricks


author: Miloslav Trmac <mitr@redhat.com> - 0.53.5-1
changelog:
  - Ignore nss_compat lines in the "files" module (#154651)
  - Autodetect Python version (#154096)
  - Add BuildRequires: libselinux-devel, s/BuildPrereq/BuildRequires/


author: Miloslav Trmac <mitr@redhat.com> - 0.53.8-1
changelog:
  - Permit "portable" user and group names as defined by SUSv3, plus trailing $
    (#159452)
  - Don't build static libraries


author: Miloslav Trmac <mitr@redhat.com> - 0.54-1
changelog:
  - Make sure attributes with no values can never appear
  - Fix crash in the "files" module when an attribute is missing
  - Use hidden visibility for internal functions, remove them from
    libuser/user_private.h; this changes module interface ABI


author: Miloslav Trmac <mitr@redhat.com> - 0.54.1-1
changelog:
  - Support importing of configuration from shadow-utils (/etc/login.defs and
    /etc/default/useradd)
  - Add libuser.conf(5) man page


author: Miloslav Trmac <mitr@redhat.com> - 0.54.6-1
changelog:
  - Fix bugs in handling of invalid lines in the files and shadow modules
  - Fix pattern matching in lu_*_enumerate_full in the files and shadow modules
  - Add more error reporting, return non-zero exit status on error from utils
  - Use the skeleton directory specified in libuser.conf by Python
    admin.createHome and admin.addUser, add parameter skeleton= to admin.addUser
    (#189984)


author: Miloslav Trmac <mitr@redhat.com> - 0.56-1
changelog:
  - Tighten the API and implementation to avoid corrupting number-like strings;
    the module interface ABI has changed
    Resolves: #226976


author: Miloslav Trmac <mitr@redhat.com> - 0.56.1-1
changelog:
  - When changing passwords, only silently ignore know shadow markers, not all
    invalid hashes
    Resolves: #225495


author: Miloslav Trmač <mitr@redhat.com> - 0.56.4-2
changelog:
  - Split the Python module to a separate subpackage (original patch by Yanko
    Kaneti)
  - Update the License: tag


author: Miloslav Trmač <mitr@redhat.com> - 0.56.5-1
changelog:
  - Work around spurious error messages when run against the Fedora Directory
    server
  - Fix error reporting when creating home directories and creating/removing mail
    spool files
    Resolves: #318121


author: Miloslav Trmač <mitr@redhat.com> - 0.56.6-1
changelog:
  - Set SELinux file contexts when creating home directories, preserve them when
    moving home directories
    Resolves: #351201


author: Miloslav Trmač <mitr@redhat.com> - 0.56.7-1
changelog:
  - Add support for SHA256 and SHA512 in password hashes
    Related: #173583
  - Fix file locking on some architectures
  - Rename sr@Latn.po to sr@latin.po
    Resolves: #426584
  - Address issues from a review by Jason Tibbitts:
    - Remove default.-c, moving the provided functions to libuser proper
    - Remove the WITH_SELINUX build option
    - Move Python library test to %check
    Resolves: #226054


author: Miloslav Trmač <mitr@redhat.com> - 0.56.11-1
changelog:
  - Update to libuser-0.56.11.
    Resolves: #454091
    Resolves: #456267
    Resolves: #456270
    Resolves: #487129


author: Miloslav Trmač <mitr@redhat.com> - 0.56.13-1
changelog:
  - Update to libuser-0.56.13.
    Resolves: #251951
    Resolves: #454079
    Resolves: #456373
    Resolves: #456382
    Resolves: #530513


author: Miloslav Trmač <mitr@redhat.com> - 0.56.13-2
changelog:
  - Allow supplying passwords from scripts
  - Allow specifying a LDAP simple bind password in libuser.conf
    Resolves: #562832


author: Miloslav Trmač <mitr@redhat.com> - 0.56.13-5
changelog:
  - Correctly mark the LDAP default password value as encrypted (CVE-2011-0002)
    Resolves: #668021
  - Default LDAP cn to username if gecos is empty
    Resolves: #670151
  - Preserve setuid and setgid bits when copying files from /etc/skel
    Resolves: #724987
  - Fix segfault when reading database files with certain sizes
    Resolves: #788521


author: Miloslav Trmač <mitr@redhat.com> - 0.56.13-7
changelog:
  - Don’t use 512-bit RSA private keys in tests
    Related: #1235518
  - Fix testsuite failures if more than one architecture is building concurrently
    Related: #1235518


author: Daniel Veillard <veillard@redhat.com> 0.0.6-1
changelog:
  - added error handling APIs
  - small bug fixes
  - improve python bindings
  - augment documentation and regression tests


author: Daniel Veillard <veillard@redhat.com> 0.1.0-1
changelog:
  - various fixes
  - new APIs: for Node information and Reboot
  - virsh improvements and extensions
  - documentation updates and man page
  - enhancement and fixes of the XML description format


author: Daniel Veillard <veillard@redhat.com> 0.1.1-1
changelog:
  - extend and cleanup the driver infrastructure and code
  - python examples
  - extend uuid support
  - bug fixes, buffer handling cleanups
  - support for new Xen hypervisor API
  - test driver for unit testing
  - virsh --conect argument


author: Daniel Veillard <veillard@redhat.com> 0.1.4-1
changelog:
  - vCPUs and affinity support
  - more complete XML, console and boot options
  - specific features support
  - enforced read-only connections
  - various improvements, bug fixes


author: Daniel Veillard <veillard@redhat.com> 0.1.5-1
changelog:
  - new release
  - bug fixes
  - support for new hypervisor calls
  - early code for config files and defined domains


author: Daniel Veillard <veillard@redhat.com> 0.1.6-1
changelog:
  - Support for localization
  - Support for new Xen-3.0.3 cdrom and disk configuration
  - Support for setting VNC port
  - Fix bug when running against xen-3.0.2 hypercalls
  - Fix reconnection problem when talking directly to http xend


author: Daniel Veillard <veillard@redhat.com> 0.1.7-1
changelog:
  - Fix bug when running against xen-3.0.3 hypercalls
  - Fix memory bug when getting vcpus info from xend


author: Daniel Veillard <veillard@redhat.com> 0.1.8-1
changelog:
  - fix missing page size detection code for ia64
  - fix mlock size when getting domain info list from hypervisor
  - vcpu number initialization
  - don't label crashed domains as shut off
  - fix virsh man page
  - blktapdd support for alternate drivers like blktap
  - memory leak fixes (xend interface and XML parsing)
  - compile fix
  - mlock/munlock size fixes


author: Daniel Veillard <veillard@redhat.com> 0.1.9-1
changelog:
  - better error reporting
  - python bindings fixes and extensions
  - add support for shareable drives
  - add support for non-bridge style networking
  - hot plug device support
  - added support for inactive domains
  - API to dump core of domains
  - various bug fixes, cleanups and improvements
  - updated the localization


author: Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
changelog:
  - support for inactive Xen domains
  - improved support for Xen display and vnc
  - a few bug fixes
  - localization updates


author: Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
changelog:
  - Fixed path to qemu daemon for autostart
  - Fixed generation of <features> block in XML
  - Pre-create config directory at startup


author: Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
changelog:
  - Disable kqemu support since its not in Fedora qemu binary
  - Fix for -vnc arg syntax change in 0.9.0  QEMU


author: Daniel Veillard <veillard@redhat.com> - 0.2.1-1
changelog:
  - Release of 0.2.1
  - lot of bug and portability fixes
  - Add support for network autostart and init scripts
  - New API to detect the virtualization capabilities of a host
  - Documentation updates


author: Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
changelog:
  - don't require xen; we don't need the daemon and can control non-xen now
  - fix scriptlet error (need to own more directories)
  - update description text


author: Daniel Veillard <veillard@redhat.com> - 0.2.3-1
changelog:
  - Release of 0.2.3
  - lot of assorted bugfixes and cleanups
  - support for Xen-3.1
  - new scheduler API


author: Daniel Veillard <veillard@redhat.com> - 0.3.0-1
changelog:
  - Release of 0.3.0
  - Secure remote access support
  - unification of daemons
  - lots of assorted bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.3.1-1
changelog:
  - Release of 0.3.1
  - localtime clock support
  - PS/2 and USB input devices
  - lots of assorted bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.3.2-1
changelog:
  - Release of 0.3.2
  - API for domains migration
  - APIs for collecting statistics on disks and interfaces
  - lots of assorted bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.3.3-1
changelog:
  - Release of 0.3.3
  - Avahi support
  - NUMA support
  - lots of assorted improvements, bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.4.0-1
changelog:
  - Release of 0.4.0
  - SASL based authentication
  - PolicyKit authentication
  - improved NUMA and statistics support
  - lots of assorted improvements, bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.4.1-1
changelog:
  - Release of 0.4.1
  - Storage APIs
  - xenner support
  - lots of assorted improvements, bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.7.0-1
changelog:
  - ESX, VBox3, Power Hypervisor drivers
  - new net filesystem glusterfs
  - Storage cloning for LVM and Disk backends
  - interface implementation based on netcf
  - Support cgroups in QEMU driver
  - QEmu hotplug NIC support
  - a lot of fixes


author: Mark McLoughlin <markmc@redhat.com> - 0.7.0-2
changelog:
  - Make sure qemu can access kernel/initrd (bug #516034)
  - Set perms on /var/lib/libvirt/boot to 0711 (bug #516034)


author: Mark McLoughlin <markmc@redhat.com> - 0.7.0-5
changelog:
  - Add PCI host device hotplug support
  - Allow PCI bus reset to reset other devices (#499678)
  - Fix stupid PCI reset error message (bug #499678)
  - Allow PM reset on multi-function PCI devices (bug #515689)
  - Re-attach PCI host devices after guest shuts down (bug #499561)
  - Fix list corruption after disk hot-unplug
  - Fix minor 'virsh nodedev-list --tree' annoyance


author: Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.2.gitfac3f4c
changelog:
  - Update to newer snapshot of 0.7.1
  - Stop libvirt using untrusted 'info vcpus' PID data (#520864)
  - Support relabelling of USB and PCI devices
  - Enable multipath storage support
  - Restart libvirtd upon RPM upgrade


author: Daniel Veillard <veillard@redhat.com> - 0.7.1-1
changelog:
  - Upstream release of 0.7.1
  - ESX, VBox driver updates
  - mutipath support
  - support for encrypted (qcow) volume
  - compressed save image format for Qemu/KVM
  - QEmu host PCI device hotplug support
  - configuration of huge pages in guests
  - a lot of fixes


author: Mark McLoughlin <markmc@redhat.com> - 0.7.1-8
changelog:
  - Disable sound backend, even when selinux is disabled (#524499)
  - Re-label qcow2 backing files (#497131)


author: Mark McLoughlin <markmc@redhat.com> - 0.7.1-10
changelog:
  - Create /var/log/libvirt/{lxc,uml} dirs for logrotate
  - Make libvirt-python dependon on libvirt-client
  - Sync misc minor changes from upstream spec


author: Mark McLoughlin <markmc@redhat.com> - 0.7.1-11
changelog:
  - Fix libvirtd memory leak during error reply sending (#528162)
  - Add several PCI hot-unplug typo fixes from upstream


author: Daniel Veillard <veillard@redhat.com> - 0.7.2-1
changelog:
  - Upstream release of 0.7.2
  - Allow to define ESX domains
  - Allows suspend and resulme of LXC domains
  - API for data streams
  - many bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.7.4-1
changelog:
  - upstream release of 0.7.4
  - udev node device backend
  - API to check object properties
  - better QEmu monitor processing
  - MAC address based port filtering for qemu
  - support IPv6 and multiple addresses per interfaces
  - a lot of fixes


author: Daniel Veillard <veillard@redhat.com> - 0.7.5-1
changelog:
  - Add new API virDomainMemoryStats
  - Public API and domain extension for CPU flags
  - vbox: Add support for version 3.1
  - Support QEMU's virtual FAT block device driver
  - a lot of fixes


author: Daniel Veillard <veillard@redhat.com> - 0.7.6-0.pre20100121
changelog:
  - Push a prerelease version of 0.7.6 for testing in Beta1
  - Allow specifying -cpu model/flags for qemu
  - Resolves: rhbz#515213
  - Add async qemu machine protocol to libvirt based on JSON QEmu API
  - Resolves: rhbz#518701
  - Allow for static PCI address assignment to all devices
  - Resolves: rhbz#481924
  - expose qemu's -fda fat:floppy feature (525074)
  - configuration of virtual CPU topology (sockets, threads, cores) (538015)
  - rewrite file chown'ing code to use security driver framework (547545 )
  - cannot create a headless KVM virtual machine (548127)
  - Improve virsh schedular parameters documentation (548485)
  - Fail to delete a inactive pool using command "virsh pool-delete" (530985)
  - virsh man page updation for using container (lxc:///) (528709)
  - Command 'virsh vcpuinfo' returns libvirt error in RHEL6 with KVM (522829)
  - Expose information about host CPU flags in capabilities (518062)


author: Daniel Veillard <veillard@redhat.com> - 0.7.6-1
changelog:
  - upstream release of 0.7.6
  - Use QEmu new device adressing when possible
  - Implement CPU topology support for QEMU driver
  - Implement SCSI controller hotplug/unplug for QEMU
  - Implement support for multi IQN
  - a lot of fixes and improvements
  - Resolves: rhbz#558761


author: Daniel Veillard <veillard@redhat.com> - 0.7.6-2
changelog:
  - enable JSON interface, desactivated by default in 0.7.6
  - Resolves: rhbz#563189
  - make sure cgroups are installed and that cgconfig service is on
  - Resolves: rhbz#531263


author: Daniel P. Berrange <berrange@redhat.com> - 0.7.6-3
changelog:
  - Fix balloon units handling in JSON mode (rhbz #566261)
  - Invoke qmp_capabilities at monitor startup (rhbz #563189)


author: Daniel Veillard <veillard@redhat.com> - 0.7.7-1
changelog:
  - macvtap support (rhbz#553348)
  - async job handling (rhbz #515278)
  - virtio channel (rhbz#515281)
  - computing baseline CPU
  - virDomain{Attach,Detach}DeviceFlags
  - Improve libvirt error reporting for failed migrations (rhbz#528793)
  - qemu driver support CPU hotplug (rhbz#533138)
  - wrong (octal) device number for attaching USB devices (rhbz#549840)
  - cannot save domain into root_squashing nfs export (rhbz#558763)
  - assorted bug fixes and lots of cleanups


author: Daniel Veillard <veillard@redhat.com> - 0.7.8-0.pre20100312
changelog:
  - preview for 0.7.8 rebase
  - Extra non upstream basic patch for spice and XQL
  - Resolves: rhbz#515264
  - Resolves: rhbz#515265
  - connected virsh dies with a SIGPIPE after libvirtd restart
  - Resolves: rhbz#526656
  - error when running logrotate on s/390x arch
  - Resolves: rhbz#547514


author: Daniel Veillard <veillard@redhat.com> - 0.7.8-0.pre20100322
changelog:
  - preview #2 for 0.7.8 rebase
  - migration max downtime API
  - Resolves: rhbz#561935
  - allow suspend during migration
  - Resolves: rhbz#561934
  - support vhost net mode at qemu startup for net devices
  - Resolves: rhbz#540391
  - read-only device access support for qemu
  - Resolves: rhbz#556769
  - LSB compliance of libvirtd init script
  - Resolves: rhbz#538701
  - No domain vcpu information output when using JSON monitor
  - Resolves: rhbz#572051
  - "qemudDomainSetMaxMemory" does not work and should be removed
  - Resolves: rhbz#572146
  - after setvcpus, any virsh command will be hung
  - Resolves: rhbz#572193
  - virsh interactive terminal crash or hung
  - Resolves: rhbz#572376
  - virsh hangs after core dump
  - Resolves: rhbz#572544
  - Fix very slow file allocation on ext3


author: Daniel Veillard <veillard@redhat.com> - 0.7.8-0.pre20100330
changelog:
  - preview #3 for 0.7.8 rebase
  - kvm hpet support
  - Resolves: rhbz#576973
  - hook scripts support
  - Resolves: rhbz#569965
  - Need to add time keeping abstraction
  - Resolves: rhbz#557285
  - notification of guest reboot
  - Resolves: rhbz#527572
  - Ability to preserve RTC clock adjustments across guest reboots
  - Resolves: rhbz#515273
  - Notifications of guest stopping due to disk I/O errors
  - Resolves: rhbz#515270
  - VNC ticketing support (524623) spice still needed
  - VNC client disconnect/connect events (515268) spice still needed


author: Daniel Veillard <veillard@redhat.com> - 0.8.0-0.pre20100407
changelog:
  - preview #4 for 0.8.0 rebase
  - snapshot API
  - domain with disk on root-squashing nfs and security driver mismatch
  - Resolves: rhbz#578630
  - Fail to read xml when restore domain
  - Resolves: rhbz#577719
  - loop "virsh cd" in virsh interactive terminal generate unknown error
  - Resolves: rhbz#572380
  - support setting qemu's -drive werror=stop/enospc with configuration
  - Resolves: rhbz#526231


author: Daniel Veillard <veillard@redhat.com> - 0.8.0-1
changelog:
  - official 0.8.0 upstream release
  - Resolves: rhbz#558761
  - new patch set of patches for RHEL-6 SPICE and addons
  - Enable QMP/ JSON mode in the QEMU monitor
  - Resolves: rhbz#563189
  - Support configuration of SPICE as a graphics protocol
  - Resolves: rhbz#515265
  - vnc (and spice) ticketing
  - Resolves: rhbz#524623
  - enable spice tls encryption in domainXML, and which channels are encrypted
  - Resolves: rhbz#573382
  - notification of VNC/SPICE client disconnect/connect events
  - Resolves: rhbz#515268


author: Daniel P. Berrange <berrange@redhat.com> - 0.8.0-2
changelog:
  - Refresh SPICE patches to fix test failures
  - Related: rhbz#515265, rhbz#524623, rhbz#573382
  - Enable test suite during build, disabling tests that don't work in mock
  - Related: rhbz#558761


author: Daniel Veillard <veillard@redhat.com> - 0.8.0-3
changelog:
  - Build ESX support in
  - Resolves: rhbz#581966
  - a batch of network filter fixes, IBM request and upstream fixes
  - Resolves: rhbz#579993
  - couple of patchs to fix device handling with QMP
  - Related: rhbz#563189
  - fix python binding for snapshotting
  - spec file fixes for nwfiler build and RHEL-5 virt-v2v specific rebuild


author: Daniel Veillard <veillard@redhat.com> - 0.8.0-4
changelog:
  - Fix libvirtd startup when avahi failed to look up local host name
  - CPU selection fixes
  - Resolves: rhbz#581627
  - fix migration poll value
  - Resolves: rhbz#584928
  - crash dump job caused libvirt hang
  - Resolves: rhbz#580853
  - Fix initial VCPU pinning in qemu driver
  - Resolves: rhbz#578434
  - fix cpu hotplug command names


author: Daniel Veillard <veillard@redhat.com> - 0.8.1-2
changelog:
  - Don't wipe generated iface target in active domains (588046)
  - Fix LXC domain lookup and error handling (586361)
  - Fix a protocol breakage introduced in libvirt-0.8.0
  - Add support for nic hotplug in QEMU/KVM (589978)
  - Seemless migration of spice graphics clients (589989)
  - fix build with ESX support
  - Resolves: rhbz#581966
  - fix multilib problem (587231)


author: Daniel Veillard <veillard@redhat.com> - 0.8.1-3
changelog:
  - missing python bindings due to older XML api
  - Resolves: rhbz#589453
  - Fix two possible crashes in JSON event dispatch
  - Resolves: rhbz#586353
  - Fix handling of disk backing stores with cgroups
  - Resolves: rhbz#581476
  - virsh schedinfo --set error handling on unknow parameters
  - Resolves: rhbz#586632
  - Apply extra patches for nwfilter
  - Resolves: rhbz#588554
  - Fix hang during concurrent guest migrations
  - Resolves: rhbz#582278


author: Dave Allan <dallan@redhat.com> - 0.8.1-5
changelog:
  - Don't reset user/group/security label for any files on shared filesystems
  - Resolves: rhbz#578889
  - Make saved state labelling ignore the dynamic_ownership parameter
  - Resolves: rhbz#588562
  - Fix & protect against NULL pointer dereference in monitor code
  - Resolves: rhbz#591076
  - Fix virFileResolveLink return value
  - Resolves: rhbz#591363
  - Add support for SSE4.1 and SSE4.2 CPU features
  - Resolves: rhbz#592977


author: Dave Allan <dallan@redhat.com> - 0.8.1-6
changelog:
  - Support seamless migration of SPICE graphics clients (refresh)
  - Resolves: rhbz#591551
  - Fix swapping of PCI vendor & product names in udev backend
  - Resolves: rhbz#578419
  - Fix cgroup setup code to cope with root squashing NFS
  - Resolves: rhbz#593193
  - Fix startup error reporting race
  - Resolves: rhbz#591272


author: Dave Allan <dallan@redhat.com> - 0.8.1-7
changelog:
  - Fix sign extension error in libvirt's parsing of qemu options
  - Resolves: rhbz#592070
  - Graceful shutdown/suspend of libvirt guests on host shutdown
  - Resolves: rhbz#566647
  - Fix pci device hotplug
  - Resolves: rhbz#572867
  - Support 802.1Qbg and bh
  - Resolves: rhbz#532760, rhbz#570949, rhbz#590110, rhbz#570923


author: Dave Allan <dallan@redhat.com> - 0.8.1-8
changelog:
  - Ensure virtio serial has stable addressing
  - Resolves: rhbz#586665
  - SELinux socket labelling on QEMU monitor socket for MLS
  - Resolves: rhbz#593739
  - Fix enumeration of partitions in disks with a trailing digit in path
  - Resolves: rhbz#593785
  - Enable probing of VPC disk format type
  - Resolves: rhbz#597981
  - Delete UNIX domain sockets upon daemon shutdown
  - Resolves: rhbz#598163
  - Fix Migration failure 'canonical hostname pointed to localhost'
  - Resolves: rhbz#589864
  - Fix up the python bindings for snapshotting
  - Resolves: rhbz#591839
  - Sanitize pool target paths
  - Resolves: rhbz#593565
  - Prevent host network conflicts
  - Resolves: rhbz#594494
  - Support 802.1Qbg and bh (vnlink/VEPA) (refresh)
  - Resolves: rhbz#590110


author: Dave Allan <dallan@redhat.com> - 0.8.1-9
changelog:
  - Touch libvirt-guests lockfile
  - Resolves: rhbz#566647
  - Add qemu.conf option for clearing capabilities
  - Resolves: rhbz#593903
  - Add support for launching guest in paused state
  - Resolves: rhbz#589465
  - Add virsh vol-pool command
  - Resolves: rhbz#602217
  - Add vol commands to virsh man page
  - Resolves: rhbz#600640
  - Remove bogus migrate error messages
  - Resolves: rhbz#601575


author: Dave Allan <dallan@redhat.com> - 0.8.1-10
changelog:
  - Add multiIQN XML output
  - Resolves: rhbz#587700
  - Fix udev node device parent-child device relationships
  - Resolves: rhbz#593995
  - Fix leaks in udev device add/remove
  - Resolves: rhbz#595490
  - Fix device destroy return value
  - Resolves: rhbz#597998
  - Update nodedev scsi_host data before use
  - Resolves: rhbz#600048
  - Display wireless devices in nodedev list
  - Resolves: rhbz#604811
  - Show pool and domain persistence
  - Resolves: rhbz#603696
  - Fix cleanup after failing to hotplug a PCI device
  - Resolves: rhbz#605168
  - Add '-nodefconfig' command line arg to QEMU
  - Resolves: rhbz#602778
  - Switch to private redhat namespace for QMP I/O error reason
  - Resolves: rhbz#586353
  - Improve error messages for missing drivers & unsupported functions
  - Resolves: rhbz#595609
  - macvtap: get interface index if not provided
  - Resolves: rhbz#605187
  - Fix leaks in remote code
  - Resolves: rhbz#603442
  - Add an optional switch --uuid to the virsh vol-pool command
  - Resolves: rhbz#604929
  - Change per-connection hashes to be indexed by UUIDs
  - Resolves: rhbz#603494
  - Run virsh from libvirt-guests script with /dev/null on stdin
  - Resolves: rhbz#606314
  - Increase dd block size to speed up domain save
  - Resolves: rhbz#601775
  - Fix reference counting bugs on qemu monitor
  - Resolves: rhbz#602660
  - Add missing action parameter in IO error callback
  - Resolves: rhbz#607157


author: Dave Allan <dallan@redhat.com> - 0.8.1-11
changelog:
  - Do not block during incoming migration
  - Resolves: rhbz#579440
  - Label serial devices
  - Resolves: rhbz#585249
  - parthelper: fix compilation without optimization
  - Related: rhbz#593785
  - Fix name/UUID uniqueness checking in storage/network
  - Resolves: rhbz#593951
  - Don't squash file permissions when migration fails
  - Resolves: rhbz#607922
  - Properly handle 'usbX' sysfs files
  - Resolves: rhbz#603867
  - add pool support to vol-key command & improve vol commands help
  - Resolves: rhbz#598365
  - document attach-disk better
  - Resolves: rhbz#601143
  - Config iptables to allow tftp port if network <tftp> element exists
  - Resolves: rhbz#607294
  - Fix failure to generate python bindings when libvirt.h.in is updated
  - Related: rhbz#589465
  - Allow all interface names
  - Resolves: rhbz#593907
  - Fix nodedevice refcounting
  - Resolves: rhbz#608753
  - Move nwfilter functions inside extern C and fix a locking bug
  - Resolves: rhbz#597391
  - Fix failure to restore qemu domains with selinux enforcing
  - Resolves: rhbz#590975
  - Check for presence of qemu -nodefconfig option before using it
  - Resolves: rhbz#608859


author: Dave Allan <dallan@redhat.com> - 0.8.1-12
changelog:
  - Don't invoke destroy callback from qemuMonitorOpen() failure paths
  - Resolves: rhbz#609060
  - virFileResolveLink: guarantee an absolute path
  - Resolves: rhbz#608092
  - SPICE patches have translatable strings without format args
  - Resolves: rhbz#608917
  - No way to pass disk format type to pool-define-as nor pool-create-as
  - Resolves: rhbz#597790
  - Fix enforcement of direction of traffic for rules describing incoming traffic
  - Resolves: rhbz#606889
  - Clarify virsh help pool-create-as text
  - Resolves: rhbz#609044


author: Dave Allan <dallan@redhat.com> - 0.8.1-14
changelog:
  - Support virtio disk hotplug in JSON mode
  - Resolves: rhbz#573946
  - Fix QEMU monitor JSON crash
  - Resolves: rhbz#604585
  - CVE-2010-2237 CVE-2010-2238 CVE-2010-2239
  - Resolves: rhbz#607817
  - CVE-2010-2242 Apply a source port mapping to virtual network masquerading
  - Resolves: rhbz#608049
  - Fix hang if QEMU exits (almost) immediately
  - Resolves: rhbz#610056
  - Support new CPU models provided by qemu-kvm
  - Resolves: rhbz#605830
  - Fix comparison of two host CPUs
  - Resolves: rhbz#611401
  - Don't mess with the CPU returned by arch driver
  - Resolves: rhbz#613014
  - Fail when CPU type cannot be detected from XML
  - Resolves: rhbz#613760
  - Use -nodefconfig when probing for CPU models
  - Resolves: rhbz#613764
  - cpuCompare: Fix crash on unexpected CPU XML
  - Resolves: rhbz#613765
  - Properly report failure to create raw storage volume files
  - Related: rhbz#547543
  - Fix IOErrorReasonCallback python bindings
  - Related: rhbz#586353
  - Parthelper: canonicalize block device paths
  - Related: rhbz#593785


author: Dave Allan <dallan@redhat.com> - 0.8.1-16
changelog:
  - Make PCI device ordering consistent with older releases
  - Resolves: rhbz#592026
  - Fix libvirtd hang during concurrent bi-directional migration
  - Resolves: rhbz#599590


author: Dave Allan <dallan@redhat.com> - 0.8.1-17
changelog:
  - Set a stable & high MAC addr for guest TAP devices
  - Resolves: rhbz#616517
  - Fix bogus commit of -16 patches
  - Related: rhbz#592026
  - Related: rhbz#599590


author: Dave Allan <dallan@redhat.com> - 0.8.1-19
changelog:
  - Add character device backend activating QEMU internal spice agent
  - Resolves: rhbz#615757
  - Make libvirt-guests initscript Fedora compliant
  - Resolves: rhbz#617300


author: Dave Allan <dallan@redhat.com> - 0.8.1-21
changelog:
  - Fix multiple PCI device assignment bugs
  - Resolves: rhbz#617116
  - Fix the ACS checking in the PCI code
  - Resolves: rhbz#615218
  - Disable boot=on when not using KVM
  - Resolves: rhbz#594068
  - Don't leak delay string when freeing virInterfaceBridgeDefs
  - Resolves: rhbz#620837


author: Dave Allan <dallan@redhat.com> - 0.8.1-22
changelog:
  - Mitigate asynchronous device_del
  - Resolves: rhbz#609437
  - Fix PCI address allocation
  - Resolves: rhbz#618484
  - Make nodeinfo skip offline CPUs
  - Resolves: rhbz#622515


author: Daniel Veillard <veillard@redhat.com> - 0.8.1-25
changelog:
  - fix PXE booting on the virtual network
  - Resolves: rhbz#623951
  - fix tunelled migration
  - Resolves: rhbz#624062


author: Dave Allan <dallan@redhat.com> - 0.8.1-26
changelog:
  - Fix problem with capabilities XML generation
  - Resolves: rhbz#620847
  - Correctly reserve and release PCI slots
  - Resolves: rhbz#623877


author: Daniel Veillard <veillard@redhat.com> - 0.8.1-27
changelog:
  - build -26 hit a miscompilation error c.f. 624895 drop -j2
  - Resolves: rhbz#620847
  - Resolves: rhbz#623877


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.1-28.el6
changelog:
  - Fix JSON migrate_set_downtime command (rhbz#561935)
  - Make SASL work over UNIX domain sockets (rhbz#641687)
  - Let qemu group look below /var/lib/libvirt/qemu/ (rhbz#643407)
  - Fix save/restore on root_squashed NFS (rhbz#643884)
  - Fix race on multiple migration (rhbz#638285)
  - Export host information through SMBIOS to guests (rhbz#526224)
  - Support forcing a CDROM eject (rhbz#626305)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.1-29.el6
changelog:
  - spec file cleanups (rhbz#649523)
  - Fix deadlock on concurrent multiple bidirectional migration (rhbz#659310)
  - Fix funny error in clock-variable (rhbz#660194)
  - Export host information through SMBIOS to guests (rhbz#526224)
  - Ensure device is deleted from guest after unplug (rhbz#644015)
  - Distinguish between QEMU domain shutdown and crash (rhbz#656845)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-1.el6
changelog:
  - Rebased to upstream 0.8.7 (rhbz#653985)
  - The following bugs got fixed by the rebase:
      rhbz#586124, rhbz#595350, rhbz#611793, rhbz#611822, rhbz#617439,
      rhbz#620363, rhbz#626873, rhbz#627143, rhbz#628772, rhbz#639595,
      rhbz#639603, rhbz#656795, rhbz#658657, rhbz#659855, rhbz#660706,
      rhbz#664406, rhbz#665446


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-2.el6
changelog:
  - Fix spec file which was not fully rebased to 0.8.7 (rhbz#653985, rhbz#660706)
  - Skip IB700 watchdog device when assigning PCI slots (rhbz#667091)
  - Improve error reporting when parsing dhcp info (rhbz#653300)
  - Don't chown saved image back to root if dynamic_ownership=0 (rhbz#661720)
  - Fix core dumps if unix_sock_group is set (rhbz#623166)
  - Add support for Westmere CPU model (rhbz#656248)
  - Add XML config switch to enable/disable vhost-net support (rhbz#643050)
  - Enable tuning of qemu network tap device "sndbuf" size (rhbz#665293)
  - Support for explicit boot device ordering (rhbz#646895)
  - Avoid qemu holding migration fd indefinitely (rhbz#620363)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-3.el6
changelog:
  - Report error if invalid type specified for character device (rhbz#638968)
  - Improve log for domain related APIs (rhbz#640202)
  - Reject SDL graphic if it's not supported by qemu (rhbz#633326)
  - Don't lose track of events when callbacks are slow (rhbz#624252)
  - Fail if per-device boot is used but deviceboot is not supported (rhbz#670399)
  - Avoid sending STOPPED event twice (rhbz#666158)
  - Fix issues introduced by dependency patches for rhbz#646895


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-4.el6
changelog:
  - Fix event-handling data race (rhbz#671567)
  - Add support for VNC over a unix domain socket (rhbz#651415)
  - Support intel 'ich6' model (rhbz#648486)
  - Do not use virtio-serial port 0 for generic ports (rhbz#670394)
  - Set SELinux context label of pipes used for qemu migration (rhbz#667756)
  - Support customizable x509 certificate paths for client (rhbz#629510)
  - Round up capacity for LVM volume creation (rhbz#670529)
  - Show error prompt when trying to managed save a shutoff domain (rhbz#672449)
  - Report more proper error for unsupported graphics (rhbz#671319)
  - Expand the man page text for virsh setmaxmem (rhbz#622534)
  - Fix event-handling allocation crash (rhbz#671564)
  - Require --mac to avoid detach-interface ambiguity (rhbz#671050)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-5.el6
changelog:
  - Docs for customizable x509 certificate paths for client (rhbz#629510)
  - Fix tests for VNC over a unix domain socket (rhbz#651415)
  - Fix problems with peer-to-peer migration (rhbz#673434)
  - Fix tunneled migration broken since 0.8.7-2 (rhbz#672199)
  - Update docs for cpu_shares setting (rhbz#641187)
  - Fix possible hang if SASL is used (rhbz#672226)
  - Cancel migration in progress when virsh gets Ctrl-C (rhbz#635353)
  - Enhance virsh migrate command (rhbz#619039)
  - Support for specifying AIO mode for qemu disks (rhbz#591703)
  - Don't leave domain paused after restore (rhbz#670278)
  - Fix possible deadlock/crash in qemu driver (rhbz#673588)
  - Add shortcut for qemu HMP pass through (rhbz#628940)
  - Fix error message when attach device fails (rhbz#675030)
  - Support for booting from assigned PCI devices (rhbz#646895)
  - Improve handling of unlimited value for memory tunables (rhbz#669069)
  - Add smartcard support (rhbz#641834)
  - Remove some RHEL-specific patches which are no longer required (rhbz#653985)
  - Support for disabling/enabling KSM per domain (rhbz#635419)
  - Add --all flag to virsh freecell command (rhbz#653530)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-6.el6
changelog:
  - Fix typo in parsing of spice 'auth' data (rhbz#676374)
  - Fix attach-interface regression (rhbz#676686)
  - Block I/O tunables via blkio cgroups controller (rhbz#632492)
  - Support SCSI RAID type & lower log level for unknown types (rhbz#675771)
  - Only initialize/cleanup libpciaccess once (rhbz#675698)
  - Imprint all logs with version + package build information (rhbz#673226)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-7.el6
changelog:
  - Properly escape special characters in domain names (rhbz#676908)
  - Fix enum type declaration (rhbz#628940)
  - Fix cleanup on VM state after failed QEMU startup (rhbz#673588)
  - Fix XML generation for smartcards (rhbz#677308)
  - Ignore failure of "qemu -M ?" on older qemu (rhbz#676563)
  - Fix typo in setting up SPICE passwords (rhbz#677709)
  - Avoid NULL dereference in virDomainMemoryStats (rhbz#677484)
  - Avoid NULL dereference on error in qemu driver (rhbz#677493)
  - Fix error message when saving a shutoff domain (rhbz#677547)
  - Create enough volumes for mpath pool (rhbz#677231)
  - Allow to delete device mapper disk partition (rhbz#611443)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-8.el6
changelog:
  - Fix --all flag of virsh freecell to really show all cells (rhbz#653530)
  - Add txmode attribute to interface XML for virtio backend (rhbz#629662)
  - Give each virtual network bridge its own fixed MAC address (rhbz#609463)
  - Fix virsh snapshot-list with --quiet option (rhbz#678833)
  - Delay IFF_UP'ing 802.1Qbh interface until migration final stage (rhbz#678826)
  - Fix several memory bugs (rhbz#679164)
  - Fix virt-pki-validate when CERTTOOL is missing (rhbz#679153)
  - Fix memory corruption in virFileAbsPath (rhbz#680281)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-9.el6
changelog:
  - Reorder nwfilter match extensions relative to state match (rhbz#678139)
  - Avoid overwriting error message in qemu driver (rhbz#678870)
  - Allow removing hash entries in virHashForEach (rhbz#681459)
  - Avoid double close on qemu domain restore (rhbz#672725)
  - Fix DomainObj refcounting/hashtable races in qemu driver (rhbz#670848)
  - Fix several memory leaks (rhbz#682249)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-11.el6
changelog:
  - Support vram specification for qxl graphics (rhbz#673578)
  - Fix parsing int options in virsh (rhbz#639587)
  - Use -o encryption=on instead of -e for qemu-img (rhbz#676984)
  - Support domain snapshots with current QMP (rhbz#589076)
  - Update auditing support (rhbz#642785)
  - Only request sound cgroup ACL when required (rhbz#680398)
  - Allow fine-tuning of device ACL permissions (rhbz#683163)
  - Support vhost in attach-interface (rhbz#683276)
  - Don't request cgroup ACL access for /dev/net/tun (rhbz#683305)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-12.el6
changelog:
  - Fix vram settings for qxl graphics (rhbz#673578)
  - Free stream when domain shuts down while its console is open (rhbz#682741)
  - Use hardcoded python path in libvirt.py (rhbz#684204)
  - Add missing checks for read only connections (CVE-2011-1146)
  - Eliminate potential null pointer deref when auditing macvtap devices (rhbz#642785)
  - Insert error messages to avoid a quiet abortion of commands (rhbz#605660)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-13.el6
changelog:
  - Properly report error in virConnectDomainXMLToNative (CVE-2011-1146)
  - Handle DNS over IPv6 (rhbz#687896)
  - Start dnsmasq even if no dhcp ranges/hosts are specified (rhbz#687291)
  - Use a separate dhcp leases file for each network (rhbz#687551)
  - Fix a possible crash in storage driver (rhbz#684712)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-14.el6
changelog:
  - Fix delayed events when SASL is active (rhbz#624252)
  - Fix ref-counting bugs (rhbz#688774)
  - Log an error if on failure to connect to netlink socket (rhbz#689001)
  - Log error and abort network startup when radvd isn't found (rhbz#688957)
  - Add PCI sysfs reset access rights to qemu (rhbz#689002)
  - Fix regression with qemu:///session URI (rhbz#684655)
  - Avoid leaking PCI config fd into qemu (rhbz#687993)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-15.el6
changelog:
  - Fix return value for virJSONValueFromString if it fails (rhbz#688723)
  - Fix positioning to end of qemu log file (rhbz#689986)
  - Initialization error of qemuCgroupData in Qemu host usb hotplug (rhbz#690183)
  - 8021Qbh: Use preassociate-rr during the migration prepare stage (rhbz#684870)
  - Make error reporting in libvirtd thread safe (rhbz#689374)
  - Add missing dependencies (rhbz#690022)
  - Fix restoring a compressed save image (rhbz#691034)
  - Fix label restore bugs in qemu driver (rhbz#690737)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-16.el6
changelog:
  - nwfilter: Enable rejection of packets (rhbz#681948)
  - Revert all previous error log priority hacks (rhbz#587603)
  - Filter out certain expected error messages from libvirtd (rhbz#587603)
  - qemu: Unlock qemu driver before return from domain save (rhbz#688774)
  - Do not send monitor command after monitor meet error (rhbz#688774)
  - qemu: Ignore libvirt debug messages in qemu log (rhbz#681492)
  - virsh: Fix memtune's help message for swap_hard_limit (rhbz#680190)
  - virsh: Fix documentation for memtune command (rhbz#680190)
  - docs: Fix typo (rhbz#680190)
  - Fix typo in systemtap tapset directory name (rhbz#693701)
  - qemu: Ignore unusable binaries (rhbz#676563)
  - qemu: Support for overriding NPROC limit (rhbz#674602)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-17.el6
changelog:
  - Don't return an error on failure to create blkio controller (rhbz#689030)
  - Fix possible infinite loop in remote driver (rhbz#691514)
  - qemu: Remove the managed state file only if restoring succeeded (rhbz#692998)
  - docs: Tweak virsh restore warning (rhbz#692998)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-18.el6
changelog:
  - network: Fix NULL dereference during error recovery (rhbz#696660)
  - virsh: Fix regression in parsing optional integer (rhbz#693963)
  - util: Fix crash when removing entries during hash iteration (rhbz#693385)
  - Experimental libvirtd upstart job (rhbz#678084)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.9.1-1.el6
changelog:
  - Rebased to upstream 0.9.1 (rhbz#705814)
  - The rebase also fixes the following bugs:
      rhbz#587276, rhbz#591058, rhbz#592170, rhbz#598792, rhbz#673814,
      rhbz#677228, rhbz#681458, rhbz#682237, rhbz#692745, rhbz#693932,
      rhbz#694382, rhbz#695653, rhbz#698071, rhbz#698197, rhbz#698208,
      rhbz#698490, rhbz#701305


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.2-1.el6
changelog:
  - Rebased to upstream 0.9.2 (rhbz#705814)
  - The rebase also fixes the following bugs:
      rhbz#569567, rhbz#691830, rhbz#607526, rhbz#609650, rhbz#632495,
      rhbz#640603, rhbz#658713, rhbz#669549, rhbz#677229, rhbz#678548,
      rhbz#640603, rhbz#682237, rhbz#683005, rhbz#684848, rhbz#688859,
      rhbz#690695, rhbz#692355, rhbz#693203, rhbz#694516, rhbz#697650,
      rhbz#698133, rhbz#702044, rhbz#704124, rhbz#704144, rhbz#705405,
      rhbz#706869, rhbz#706883, rhbz#706966, rhbz#707173, rhbz#707257,
      rhbz#707298, rhbz#709576, rhbz#709776, rhbz#710150, rhbz#711151


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-1.el6
changelog:
  - Rebased to upstream 0.9.3 (rhbz#705814)
  - The rebase also fixes the following bugs:
      rhbz#591974, rhbz#632499, rhbz#641087, rhbz#664629, rhbz#679668,
      rhbz#682121, rhbz#693648, rhbz#693650, rhbz#693661, rhbz#698340,
      rhbz#698825, rhbz#698861, rhbz#701394, rhbz#707439, rhbz#707530,
      rhbz#715355, rhbz#716826, rhbz#717203, rhbz#718143, rhbz#712050,
      rhbz#715184


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-2.el6
changelog:
  - Fix mistaken order of server cert/key parameters in constructor (rhbz#719838)
  - qemu: Don't chown files on NFS share if dynamic_ownership is off (rhbz#716478)
  - util: Don't try to fchown files opened as non-root (rhbz#707257)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-4.el6
changelog:
  - storage: Avoid memory leak on metadata fetching (rhbz#707155)
  - graphics: Add support for action_if_connected in qemu (rhbz#707212)
  - qemu: Save domain status ASAP after creating qemu process (rhbz#707894)
  - bios: Add support for SGA (rhbz#711598)
  - pci: Initialize state values on reattach (rhbz#713697)
  - Keep consistence between code and doc on log level and usage (rhbz#716888)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-8.el6
changelog:
  - libvirt crash when running domains and vdsm is restarted (rhbz#723811)
  - connect to hypervisor with unconfigured tls/tcp connection pbm (rhbz#723442)
  - virsh list produced segmentation fault when libvirtd is not up (rhbz#723843)
  - clientcert.pem validation failure cause libvirtd crash (rhbz#723881)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-0rc1.el6
changelog:
  - rebased to upstream 0.9.4 release candidate 1 (rhbz#705814)
  - the rebase also fixes the following bugs:
      rhbz#603039, rhbz#632499, rhbz#632760, rhbz#643947, rhbz#678027,
      rhbz#697742, rhbz#697841, rhbz#704836, rhbz#707530, rhbz#720350,
      rhbz#720889, rhbz#721335, rhbz#722862


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-0rc2.el6
changelog:
  - rebased to upstream 0.9.4 release candidate 2 (rhbz#705814)
  - the rebase also fixes the following bugs:
      rhbz#667624, rhbz#669586, rhbz#682084, rhbz#707155, rhbz#707212,
      rhbz#725322, rhbz#725935, rhbz#725950


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-1.el6
changelog:
  - Rebased to upstream 0.9.4 (rhbz#705814)
  - The rebase also fixes the following bugs:
      rhbz#634653, rhbz#707212, rhbz#722806, rhbz#723862, rhbz#726304,
      rhbz#726398, rhbz#727047, rhbz#727094


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-2.el6
changelog:
  - daemon: Unlink unix socket paths on shutdown (rhbz#725702)
  - rpc:Fix sasl session relocking intead of unlocking it (rhbz#729198)
  - network: Eliminate lag in updating dnsmasq hosts files (rhbz#727982)
  - Don't mount /dev for application containers (rhbz#728835)
  - support connected parameter in set_password (rhbz#707212)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-3.el6
changelog:
  - Fix large files support (rhbz#728992)
  - qemu: Avoid overwriting errors from virGetHostname (rhbz#729567)
  - qemu: Fix -chardev udp if parameters are omitted (rhbz#689761)
  - managedsave: Prohibit use on transient domains (rhbz#729714)
  - nwfilter: Tolerate disappearing interfaces while instantiating filter (rhbz#729945)
  - docs: Describe new virtual switch configuration in network XML docs (rhbz#643947)
  - storage: Directory shouldn't be listed as type 'file' (rhbz#727088)
  - virsh: Add dir type for listing volumes with vol-list (rhbz#727088)
  - qemu: Avoid crash on process attach (rhbz#730615)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-4.el6
changelog:
  - Bugfix: Check stdoutWatch before removing the handler. (rhbz#730600)
  - daemon: Fix regression of libvirtd reloading support (rhbz#730428)
  - libvirtd.init.in: Stop/restart() - wrong return value in case of failure (rhbz#730510)
  - Add API for duplicating a socket/client file descriptor (rhbz#720269)
  - Add backlog parameter to virNetSocketListen (rhbz#720269)
  - Support changing UNIX socket owner in virNetSocketNewListenUNIX (rhbz#720269)
  - qemu: Refactor do{Tunnel, Native}Migrate functions (rhbz#720269)
  - qemu: Use virNetSocket for tunneled migration (rhbz#720269)
  - qemu: Use fd: protocol for migration (rhbz#720269)
  - qemu: Support event_idx parameter for virtio disk and net devices (rhbz#725448)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-5.el6
changelog:
  - patch problem for seamless SPICE migration (rhbz#730753)
  - macvtap: Fix getPhysfn to get the PF of a direct attach network interface (rhbz#732082)
  - SSL spice session can't be kept during migration (rhbz#729874)
  - Storage driver should flush host cache after cloning volumes (rhbz#689416)
  - Documentation for CFS bandwidth limiting cgroup (rhbz#692769)
  - libvirt error message should show the uri content but not (null) (rhbz#730244)
  - libvirtd.conf error causes libvirtd to exit silently (rhbz#728654)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-6.el6
changelog:
  - daemon: Move TLS initialization to virInitialize (rhbz#732893)
  - Fix command test wrt gnutls initialize & fix debugging (rhbz#732893)
  - qemu: Init reattaching related members pciDevice before reattach (rhbz#728203)
  - qemu: error if qemu monitor command not found for BlockJob (rhbz#727502)
  - virsh: error if specified bandwidth is invalid for blockjob (rhbz#727502)
  - util: Only fchown newly created files in virFileOpenAs (rhbz#534010)
  - screenshot: Implement multiple screen support (rhbz#710489)
  - security: Rename SetSocketLabel APIs to SetDaemonSocketLabel (rhbz#731243)
  - security: Introduce SetSocketLabel (rhbz#731243)
  - qemu: Correctly label migration TCP socket (rhbz#731243)
  - snapshot: Don't leak resources on qemu snapshot failure (rhbz#733499)
  - Fix memory leak while scanning snapshots (rhbz#674537)
  - qemu: Minor formatting cleanup (rhbz#674537)
  - Swap virDomain and virDomainSnapshot declaration (rhbz#674537)
  - snapshot: Only pass snapshot to qemu command line when reverting (rhbz#674537)
  - snapshot: Track current snapshot across restarts (rhbz#674537)
  - send-key: Fix scan keycode map (rhbz#733597)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-7.el6
changelog:
  - qemu: Properly label outgoing pipe for tunneled migration (rhbz#733998)
  - snapshot: Forbid snapshot on autodestroy domain (rhbz#733806)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-8.el6
changelog:
  - qemu: Fix a regression of domain save (rhbz#735011)
  - virsh: Improve send-key documentation (rhbz#699847)
  - start: Allow discarding managed save (rhbz#730750)
  - virsh: Support 'virsh start --force-boot' on older servers (rhbz#730750)
  - maint: Fix comment typos (rhbz#730750)
  - qemu: Refactor file opening (rhbz#730750)
  - qemu: Detect incomplete save files (rhbz#730750)
  - virsh: Avoid memory leak on cmdVolCreateAs (rhbz#735008)
  - snapshot: Fix corner case on OOM during creation (rhbz#674537)
  - Ensure stream is aborted when exiting console (rhbz#731673)
  - following for (rhbz#731583, rhbz#731579, rhbz#731584, rhbz#731673):
  - Ensure client streams are closed when marking a client for close
  - Fix race condition in abort of stream
  - Tweak debugging message in RPC client code
  - Don't attempt to read from a stream if it is closed
  - Ensure async packets never get marked for sync replies
  - Ignore unused streams in virStreamAbort
  - rpc: Don't close connection if program is unknown
  - rpc: Fix a typo in debugging log in virNetServerProgramSendStreamData
  - stream: Remove redundant reference to client while sending stream data
  - Fix memory leak dispatching domain events
  - Avoid use-after-free on streams, due to message callbacks
  - Fix tracking of RPC messages wrt streams
  - Fix parted sector size assumption (rhbz#735441)
  - Fix incorrect path length check in sanlock lockspace setup (rhbz#735443)
  - Fix sanlock socket security labelling (rhbz#735442)
  - Remove bogus virSecurityManagerSetProcessFDLabel method (rhbz#735442)
  - security: Fix build (rhbz#735442)
  - Fix keymap used to talk with QEMU (rhbz#632499)
  - virsh: Fix snapshot-create-as to handle arbitrary names (rhbz#735495)
  - virsh: Add virsh snapshot-current --name (rhbz#735495)
  - virsh: Add snapshot-parent (rhbz#735495)
  - virsh: Don't reject undefine on active domain (rhbz#735495)
  - virsh: Fix logic bug (rhbz#735495)
  - virsh: Fix dead store (rhbz#735495)
  - virsh: Tweak misleading wording (rhbz#735495)
  - virsh: Concatenate qemu-monitor-command arguments (rhbz#735495)
  - maint: Treat more libxml2 functions as free-like (rhbz#735495)
  - xml: Add another convenience function (rhbz#735495)
  - maint: Simplify lots of libxml2 clients (rhbz#735495)
  - virsh: Add list --managed-save (rhbz#735495)
  - virsh: Prefer unsigned flags (rhbz#735495)
  - snapshot: Add snapshot-list --parent to virsh (rhbz#735495)
  - qemu: Allow to undefine a running domain (rhbz#735498)
  - test: Allow to undefine a running domain (rhbz#735498)
  - build: Fix typo in recent test patch (rhbz#735498)
  - test: Rewrite test to match change in behavior (rhbz#735498)
  - virsh: Properly interleave shared stdout and stderr (rhbz#735498)
  - snapshot: Better events when starting paused (rhbz#733762)
  - snapshot: Fine-tune ability to start paused (rhbz#733762)
  - snapshot: Expose --running and --paused in virsh (rhbz#733762)
  - snapshot: Fine-tune qemu saved images starting paused (rhbz#733762)
  - snapshot: Improve reverting to qemu paused snapshots (rhbz#733762)
  - snapshot: Properly revert qemu to offline snapshots (rhbz#733762)
  - snapshot: Fine-tune qemu snapshot revert states (rhbz#733762)
  - snapshot: Properly revert qemu to offline snapshots (rhbz#733762)
  - snapshot: Fine-tune qemu snapshot revert states (rhbz#733762)
  - snapshot: Speed up snapshot location (rhbz#733529)
  - snapshot: Avoid crash when deleting qemu snapshots (rhbz#733529)
  - snapshot: Track current domain across deletion of children (rhbz#733529)
  - snapshot: Simplify acting on just children (rhbz#733529)
  - snapshot: Allow deletion of just snapshot metadata (rhbz#735457)
  - snapshot: Let qemu discard only snapshot metadata (rhbz#735457)
  - snapshot: Identify which snapshots have metadata (rhbz#735457)
  - snapshot: Reflect new dumpxml and list options in virsh (rhbz#735457)
  - snapshot: Identify qemu snapshot roots (rhbz#735457)
  - snapshot: Allow recreation of metadata (rhbz#735457)
  - snapshot: Refactor virsh snapshot creation (rhbz#735457)
  - snapshot: Improve virsh snapshot-create, add snapshot-edit (rhbz#735457)
  - snapshot: Add qemu snapshot creation without metadata (rhbz#735457)
  - snapshot: Add qemu snapshot redefine support (rhbz#735457)
  - vbox, xenapi: Add virDomainUndefineFlags (rhbz#735457)
  - snapshot: Prevent stranding snapshot data on domain destruction (rhbz#735457)
  - snapshot: Teach virsh about new undefine flags (rhbz#735457)
  - snapshot: Refactor some qemu code (rhbz#735457)
  - snapshot: Cache qemu-img location (rhbz#735457)
  - snapshot: Support new undefine flags in qemu (rhbz#735457)
  - snapshot: Prevent migration from stranding snapshot data (rhbz#735457)
  - snapshot: Refactor domain xml output (rhbz#735553)
  - snapshot: Allow full domain xml in snapshot (rhbz#735553)
  - snapshot: Correctly escape generated xml (rhbz#735553)
  - snapshot: Update rng to support full domain in xml (rhbz#735553)
  - snapshot: Store qemu domain details in xml (rhbz#735553)
  - schedinfo: Update man page about virsh schedinfo command (unknown)
  - snapshot: Additions to domain xml for disks (rhbz#638510)
  - snapshot: Reject transient disks where code is not ready (rhbz#638510)
  - snapshot: Introduce new deletion flag (rhbz#638510)
  - snapshot: Expose new delete flag in virsh (rhbz#638510)
  - snapshot: Allow halting after snapshot (rhbz#638510)
  - snapshot: Expose halt-after-creation in virsh (rhbz#638510)
  - snapshot: Support extra state in snapshots (unknown)
  - snapshot: Add <disks> to snapshot xml (rhbz#638510)
  - snapshot: Also support disks by path (rhbz#638510)
  - snapshot: Add virsh domblklist command (rhbz#638510)
  - snapshot: Add flag for requesting disk snapshot (rhbz#638510)
  - snapshot: Wire up disk-only flag to snapshot-create (rhbz#638510)
  - snapshot: Reject unimplemented disk snapshot features (rhbz#638510)
  - snapshot: Make it possible to audit external snapshot (rhbz#638510)
  - snapshot: Wire up new qemu monitor command (rhbz#638510)
  - snapshot: Wire up live qemu disk snapshots (rhbz#638510)
  - snapshot: Use SELinux and lock manager with external snapshots (rhbz#638510)
  - daemon: Create priority workers pool (rhbz#692663)
  - qemu: Introduce job queue size limit (rhbz#692663)
  - qemu: Deal with stucked qemu on daemon startup (rhbz#692663)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-10.el6
changelog:
  - virterror: Fix error message for VIR_ERR_INVALID_ARG (rhbz#689388)
  - remote: Refuse connecting to remote socket (rhbz#689388)
  - Threadpool: Initialize new dynamic workers (rhbz#692663)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-11.el6
changelog:
  - blockinfo: Fix qemu regression in handling disk name (rhbz#736603)
  - doc: Fix incorrect option in send-key (rhbz#736297)
  - virsh: Fix typo in opts_send_key (rhbz#736297)
  - rpc: Avoid memory leak on virNetTLSContextValidCertificate (rhbz#735650)
  - tests: Avoid memory leak on testTLSSessionInit (rhbz#735650)
  - qemu: Fix seamless SPICE migration with older qemu (rhbz#730753)
  - snapshot: Fix regression with system checkpoints (rhbz#736682)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-12.el6
changelog:
  - selinux: Detect virt_use_nfs boolean set (rhbz#589922)
  - virnetsocket: Pass KRB5CCNAME env variable (rhbz#737176)
  - snapshot: Fix double free of qemuImgBinary (rhbz#737010)
  - qemu_api: Modify apibuild.py to generate docs for QEMU APIs (rhbz#736040)
  - qemu_api: Update Makefile for subdir docs (rhbz#736040)
  - qemu_api: Add comments for API virDomainQemuMonitorCommand (rhbz#736040)
  - qemu_api: Add override XML and C files for QEMU APIs (rhbz#736040)
  - qemu_api: Update Py binding generator to generate files for QEMU APIs (rhbz#736040)
  - qemu_api: Update Makefile to generate libvirtmod_qemu lib (rhbz#736040)
  - qemu_api: Update libvirt spec file (rhbz#736040)
  - Remove two references to files not generated (rhbz#736040)
  - qemu_api: Doc improvements (rhbz#736040)
  - python: Fix libvirt.py generation to include virterror info (rhbz#736040)
  - snapshot: New APIs for inspecting snapshot object (rhbz#735457)
  - snapshot: Use new API for less work (rhbz#735457)
  - snapshot: ABI stability must include memory sizing (rhbz#735553)
  - spec: Require augeas for sanlock (rhbz#738314)
  - sanlock: Add missing test command in virt-sanlock-cleanup.in (rhbz#738534)
  - snapshot: Tweak snapshot-create-as diskspec docs (rhbz#738411)
  - qemu: Hold conn open for all threads started by qemuProcessReconnectAll (rhbz#738778)
  - rpc: Convert unknown procedures to VIR_ERR_NO_SUPPORT (rhbz#738439)
  - Prevent crash from dlclose() of libvirt.so (rhbz#739167)
  - doc: Add statment about permissions needed to do a core dump (rhbz#738146)
  - snapshot: Affect persistent xml after disk snapshot (rhbz#738676)
  - snapshot: Allow disk snapshots of qcow2 disks (rhbz#738676)
  - qemu: Prevent disk corruption on domain shutdown (rhbz#734773)
  - qemu: Introduce shutdown reason for paused state (rhbz#734773)
  - qemu: Fix shutoff reason when domain crashes (rhbz#739641)
  - qemu: Properly detect crash of a rebooted domain (rhbz#739641)
  - qemu: Avoid memory leak (rhbz#739704)
  - remote: Avoid memory leak (rhbz#739704)
  - util: Avoid memory leak (rhbz#739704)
  - Fix memory leak parsing 'relabel' attribute in domain security XML (rhbz#739704)
  - Don't leak memory if a cgroup is mounted multiple times (rhbz#739704)
  - network: Eliminate potential memory leak on parse failure (rhbz#739704)
  - virsh: doc: Fix supported driver types for attach-disk command (rhbz#738970)
  - Do not log invalid operations in libvirtd logs (rhbz#590807)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-13.el6
changelog:
  - Fix crash on events due to allocation errors (rhbz#737881)
  - remote: Fix crash on OOM (rhbz#737881)
  - Fix persistent migration config save (rhbz#738148)
  - qemu: Transfer inactive XML among cookie (rhbz#738148)
  - storage: Ensure the device path exists before refreshing disk pool (rhbz#611442)
  - Store max migration bandwidth in qemuDomainObjPrivate struct (rhbz#740099)
  - Save migration speed in qemuDomainMigrateSetMaxSpeed (rhbz#740099)
  - Set qemu migration speed unlimited when migrating to file (rhbz#740099)
  - Use max bandwidth from qemuDomainObjPrivate struct when migrating (rhbz#740099)
  - build: Silence warning on 32-bit build (rhbz#740099)
  - conf: Assign newDef of active domain as persistent conf if it is NULL (rhbz#728428)
  - qemu: Avoid dereferencing a NULL pointer (rhbz#739704)
  - sanlock: Fix memory leak (rhbz#739704)
  - virsh: Fix regression in argv parsing (rhbz#740168)
  - snapshot: Fix logic bug in qemu undefine (rhbz#735457)
  - snapshot: Prepare to remove transient snapshot metadata (rhbz#735457)
  - snapshot: Remove snapshot metadata on transient exit (rhbz#735457)
  - snapshot: Also delete empty directory (rhbz#735457)
  - virsh: Do not ignore the specified flags for cmdSaveImageDefine (rhbz#740508)
  - selinux: Correctly report warning if virt_use_nfs not set (rhbz#589922)
  - qemu: Properly hot-unplug drives (rhbz#696596)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-14.el6
changelog:
  - Fix synchronous reading of stream data (rhbz#741337)
  - qemu: Add ability to set PCI device "rombar" on or off (rhbz#738095)
  - virsh: Better document --copy-storage migrate options (rhbz#677220)
  - virsh: Enhance documentation of commands starting jobs (rhbz#705237)
  - qemu: Always remove domain object if MigratePrepare fails (rhbz#741251)
  - security: Properly chown/label bidirectional and unidirectional fifos (rhbz#740478)
  - qemu: Check domain status details when reconnecting monitor (rhbz#617890)
  - qemu: Finish domain shutdown on reconnect (rhbz#617890)
  - qemu: Avoid loop of fake reboots (rhbz#617890)
  - qemu: Preserve fakeReboot flag in domain status (rhbz#617890)
  - snapshot: Fix man page typos (rhbz#740686)
  - docs: Document virsh nodedev-* commands (rhbz#740686)
  - docs: Document node device XML (rhbz#740686)
  - qemu: Add return value check (rhbz#739704)
  - qemu: Check for ejected media during startup and migration (rhbz#725673)
  - virsh: Update man page for cpu_shares parameter (rhbz#639591)
  - virsh: Describe attach-interface parameter target (rhbz#698899)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-15.el6
changelog:
  - Add virFileLock and virFileUnlock APIs (rhbz#728153)
  - Move pidfile functions into util/virpidfile.{c, h} (rhbz#728153)
  - Introduce functions for checking whether a pidfile is valid (rhbz#728153)
  - Add some APIs which use locking for crashsafe pidfile handling (rhbz#728153)
  - Convert libvirtd to use crash-safe pidfile APIs (rhbz#728153)
  - build: Fix recent build failures (rhbz#728153)
  - daemon: Don't remove pidfiles in init scripts (rhbz#728153)
  - daemon: Modify init script to detect upstart managed libvirtd (rhbz#728153)
  - qemu: Check for outstanding async job too (rhbz#742277)
  - qemu: Make PCI multifunction support more manual (rhbz#727530)
  - network: Fill in bandwidth from portgroup for all forward modes (rhbz#743176)
  - snapshot: Refactor virsh snapshot parent computation (rhbz#742410)
  - snapshot: Better virsh handling of missing current, parent (rhbz#742410)
  - qemu: Fix migration with dname (rhbz#740533)
  - qemu: Correct misspelled 'enospc' option, and only use for werror (rhbz#730909)
  - snapshot: Add REVERT_FORCE to API (rhbz#742615)
  - snapshot: Use qemu-img on disks in use at time of snapshot (rhbz#742615)
  - snapshot: Enforce REVERT_FORCE on qemu (rhbz#742615)
  - init: Raise default system aio limits (rhbz#740899)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-16.el6
changelog:
  - qemu: Enable multifunction for older qemu (rhbz#738388)
  - qemu: Don't fail virDomainGetInfo if we can't update balloon info (rhbz#741217)
  - qemu: Leave rerror policy at default when enospace is requested (rhbz#730909)
  - snapshot: Fix virsh error message typo (rhbz#735457)
  - snapshot: Let virsh edit disk snapshots (rhbz#744071)
  - snapshot: Simplify redefinition of disk snapshot (rhbz#744071)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-17.el6
changelog:
  - Fix deadlock when the RPC program is unknown (rhbz#743843)
  - qemuDomainAttach: Initialize pidfile variable (rhbz#744548)
  - storage: Do not use comma as seperator for lvs output (rhbz#727474)
  - snapshot: Avoid accidental renames with snapshot-edit (rhbz#744724)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-18.el6
changelog:
  - virDomainCoreDump: Introduce VIR_DUMP_RESET flag (rhbz#632498)
  - qemu: Implement VIR_DUMP_RESET (rhbz#632498)
  - qemu: Check for domain being active on successful job acquire (rhbz#745734)
  - Set to NULL members that have been freed to prevent crashes (rhbz#746075)
  - virFDStream: Close also given errfd (fd leak) (rhbz#746075)
  - qemu: Silence Coverity false positive (rhbz#739704)
  - command: Avoid fd leak on failure (rhbz#739704)
  - build: Add compiler attributes to virUUIDParse (rhbz#739704)
  - qemu: Check for json allocation failure (rhbz#739704)
  - qemu: Fix text block info parsing (rhbz#739704)
  - storage: Plug memory leak on error (rhbz#739704)
  - conf: Plug memory leak on error (rhbz#739704)
  - qemu: Plug memory leak on migration (rhbz#739704)
  - macvtap: Plug memory leak for 802.1Qbh (rhbz#739704)
  - macvtap: Avoid invalid free (rhbz#739704)
  - Update to require sanlock 1.8 for license compliance (rhbz#739518)
  - events: Propose a separate lock for event queue (rhbz#743817)
  - util: Make getaddrinfo failure nonfatal in virGetHostname (rhbz#738915)
  - qemu: Make sure BeginJob is always followed by EndJob (rhbz#746268)
  - pci: Fix pciDeviceListSteal on multiple devices (rhbz#733587)
  - qemu: Do not reattach PCI device used by other domain when shutdown (rhbz#733587)
  - qemu: Honor the orginal PCI dev properties when reattaching (rhbz#736214)
  - daemon: Always advertise libvirtd service (rhbz#726616)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-20.el6
changelog:
  - qemu: Avoid leaking uninit data from hotplug to dumpxml (rhbz#747516)
  - storage: Plug iscsi memory leak (rhbz#747516)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-21.el6
changelog:
  - docs: Document managed=yes of hostdev passthrough (rhbz#740686)
  - ServerClient: Flush cached data (rhbz#748025)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-1.el6
changelog:
  - Rebase to upstream 0.9.10 (rhbz#752433)
  - Add support for sVirt in the LXC driver
  - block rebase: add new API virDomainBlockRebase
  - API: Add api to set and get domain metadata
  - virDomainGetDiskErrors public API
  - conf: add rawio attribute to disk element of domain XML
  - Add new public API virDomainGetCPUStats()
  - Introduce virDomainPMSuspendForDuration API
  - resize: add virStorageVolResize() API
  - Add a virt-host-validate command to sanity check HV config
  - Add new virDomainShutdownFlags API
  - QEMU guest agent support
  - many improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-2.el6
changelog:
  - qemu: Set capabilities based on supported monitor commands (rhbz#766958)
  - qemu: Implement DomainPMSuspendForDuration (rhbz#766958)
  - snapshot: Fix snapshot deletion use-after-free (rhbz#790744)
  - storage: Allow runtime detection of scrub (rhbz#725013)
  - qemu: Unlock monitor when connecting to dest qemu fails (rhbz#783968)
  - qemu: Prevent crash of libvirtd without guest agent (rhbz#790745)
  - python: Expose virDomain{G,S}etInterfaceParameters APIs in python binding (rhbz#770971)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-3.el6
changelog:
  - storage: Allow runtime detection of scrub missing build dep (rhbz#725013)
  - daemon: Plug memory leak (rhbz#795978)
  - daemon: Fix logic bug with virAsprintf (rhbz#795978)
  - util: Fix virFileAccessibleAs return path from parent (rhbz#795093)
  - Add support for unsafe migration (rhbz#751631)
  - virsh: Add --unsafe option to migrate command (rhbz#751631)
  - Introduce virStorageFileIsClusterFS (rhbz#751631)
  - qemu: Forbid migration with cache != none (rhbz#751631)
  - qemu: Nicer error message on failed graceful destroy (rhbz#795656)
  - Error out when using SPICE TLS with spice_tls=0 (rhbz#790436)
  - Revert "spec: Mark directories in /var/run as ghosts" (rhbz#788985)
  - Fixed URI parsing (rhbz#785164)
  - virsh: Fix informational message in iface-bridge command (rhbz#797066)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-4.el6
changelog:
  - Improve error reporting when virsh console is run without a TTY (rhbz#729940)
  - pidfile: Make checking binary path in virPidFileRead optional (rhbz#729940)
  - Add flags for virDomainOpenConsole (rhbz#729940)
  - virsh: Add support for VIR_DOMAIN_CONSOLE_* flags (rhbz#729940)
  - fdstream: Emit stream abort callback even if poll() doesnt. (rhbz#729940)
  - fdstream: Add internal callback on stream close (rhbz#729940)
  - util: Add helpers for safe domain console operations (rhbz#729940)
  - qemu: Add ability to abort existing console while creating new one (rhbz#729940)
  - Fixed service handling in specfile (rhbz#786770)
  - qemu: Don't emit tls-port spice option if port is -1 (rhbz#798220)
  - docs: Comments wiping supported algorithms (rhbz#725013)
  - libvirt-guests: Add documentation and clean up to use virsh's improved list (rhbz#693758)
  - libvirt-guests: Don't try to do a managed-save of transient guests (rhbz#693758)
  - virsh: Enhance list command to ease creation of shell scripts (rhbz#693758)
  - libvirt-guests: Check if URI is reachable before launching commands (rhbz#720691)
  - hooks: Add support for capturing hook output (rhbz#795127)
  - qemu: Add pre-migration hook (rhbz#795127)
  - Support for cpu64-rhel* qemu cpu models (rhbz#768450)
  - util: Add netlink event handling to virnetlink.c (rhbz#693842)
  - Add de-association handling to macvlan code (rhbz#693842)
  - qemu: Add ibmvscsi controller model (rhbz#782034)
  - qemu: Add virtio-scsi controller model (rhbz#782034)
  - conf: Add helper function to look up disk controller model (rhbz#782034)
  - conf: Introduce new attribute for device address format (rhbz#782034)
  - qemu: New cap flag to indicate if channel is supported by scsi-disk (rhbz#782034)
  - qemu: Build command line for the new address format (rhbz#782034)
  - tests: Add tests for virtio-scsi and ibmvscsi controllers (rhbz#782034)
  - virsh: Two new helper functions for disk device changes (rhbz#713932)
  - virsh: Use vshFindDisk and vshPrepareDiskXML in cmdDetachDisk (rhbz#713932)
  - virsh: New command cmdChangeMedia (rhbz#713932)
  - qemu: Require json for block jobs (rhbz#799055)
  - qemu: Pass block pull backing file to monitor (rhbz#799055)
  - virsh: Expose partial pull (rhbz#799055)
  - libvirt-guests: Add parallel startup and shutdown of guests (rhbz#625362)
  - qemu: Shared or readonly disks are always safe wrt migration (rhbz#751631)
  - util: Eliminate crash in virNetDevMacVLanCreateWithVPortProfile (rhbz#693842)
  - rpc: Fix client crash on connection close (rhbz#800185)
  - conf: Add missing device types to virDomainDevice(Type|Def) (rhbz#691539)
  - conf: Relocate virDomainDeviceDef and virDomainHostdevDef (rhbz#691539)
  - conf: Reorder static functions in domain_conf.c (rhbz#691539)
  - qemu: Rename virDomainDeviceInfoPtr variables to avoid confusion (rhbz#691539)
  - conf: Add device pointer to args of virDomainDeviceInfoIterate callback (rhbz#691539)
  - conf: Make hostdev info a separate object (rhbz#691539)
  - conf: HostdevDef parse/format helper functions (rhbz#691539)
  - conf: Give each hostdevdef a parent pointer (rhbz#691539)
  - conf: Put subsys part of virDomainHostdevDef into its own struct (rhbz#691539)
  - conf: Hostdev utility functions (rhbz#691539)
  - qemu: Re-order functions in qemu_hotplug.c (rhbz#691539)
  - qemu: Refactor hotplug detach of hostdevs (rhbz#691539)
  - conf: Parse/format type='hostdev' network interfaces (rhbz#691539)
  - qemu: Support type='hostdev' network devices at domain start (rhbz#691539)
  - conf: Change virDomainNetRemove from static to global (rhbz#691539)
  - qemu: Use virDomainNetRemove instead of inline code (rhbz#691539)
  - qemu: Support type=hostdev network device live hotplug attach/detach (rhbz#691539)
  - util: Two new pci util functions (rhbz#691539)
  - util: Support functions for mac/portprofile associations on hostdev (rhbz#691539)
  - util: Changes to support portprofiles for hostdevs (rhbz#691539)
  - qemu: Install port profile and mac address on netdev hostdevs (rhbz#691539)
  - Fix build after commit e3ba4025 (rhbz#693842)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-5.el6
changelog:
  - Avoid global variable shadowed (rhbz#737726)
  - Add nodeGetCPUmap() for getting available CPU IDs in a cpumap. (rhbz#737726)
  - Qemu driver for virDomainGetCPUstats using cpuacct cgroup. (rhbz#737726)
  - Cpu-stats command shows cpu statistics information of a domain. (rhbz#737726)
  - Ensure max_id is initialized in linuxParseCPUmap() (rhbz#737726)
  - rpc: Allow truncated return for virDomainGetCPUStats (rhbz#737726)
  - qemu: Don't parse device twice in attach/detach (rhbz#770031)
  - sanlock: Fix condition left crippled while debugging (rhbz#785736)
  - sanlock: Use STREQ_NULLABLE instead of STREQ on strings that may be null (rhbz#785736)
  - qemu: Fix startupPolicy for snapshot-revert (rhbz#798938)
  - util: Don't overflow on errno in virFileAccessibleAs (rhbz#798938)
  - blockResize: Add flag for bytes (rhbz#796526)
  - docs: Use correct terminology for 1024 bytes (rhbz#796526)
  - api: Add overflow error (rhbz#796526)
  - util: New function for scaling numbers (rhbz#796526)
  - xml: Share 'unit' in RNG (rhbz#796526)
  - xml: Output memory unit for clarity (rhbz#796526)
  - storage: Support more scaling suffixes (rhbz#796526)
  - xml: Drop unenforced minimum memory limit from RNG (rhbz#796526)
  - xml: Use long long internally, to centralize overflow checks (rhbz#796526)
  - xml: Use better types for memory values (rhbz#796526)
  - xml: Allow scaled memory on input (rhbz#796526)
  - virsh: Add option aliases (rhbz#796526)
  - virsh: Use option aliases (rhbz#796526)
  - virsh: Add command aliases, and rename nodedev-detach (rhbz#796526)
  - virsh: Improve storage unit parsing (rhbz#796526)
  - virsh: Improve memory unit parsing (rhbz#796526)
  - qemuBuildCommandLine: Don't add tlsPort if none set (rhbz#801443)
  - Removed more AMD-specific features from cpu64-rhel* models (rhbz#768450)
  - qemu: Support disk filenames with comma (rhbz#801970)
  - cpustats: Collect VM user and sys times (miss python bindings) (rhbz#800366)
  - cpustats: Report user and sys times (rhbz#800366)
  - qemu: Fix (managed)save and snapshots with host mode CPU (rhbz#801160)
  - qemu: Make block io tuning smarter (rhbz#770683)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-6.el6
changelog:
  - cpu: Add new flag supported by qemu to the cpu definition (rhbz#767364)
  - Added support for AMD Bulldozer CPU (rhbz#767364)
  - graphics: Cleanup port policy (rhbz#801443)
  - qemu: Reverse condition in qemuDomainCheckDiskPresence (rhbz#798938)
  - cpu: Add cpu definition for Intel Sandy Bridge cpu type (rhbz#761005)
  - cpu: Disable tsc-deadline feature not supported in qemu on RHEL 6.3 (rhbz#761005)
  - qemu: Support numad (rhbz#769930)
  - numad: Fix typo and warning (rhbz#769930)
  - qemu: Use scsi-block for lun passthrough instead of scsi-disk (rhbz#782034)
  - util: Make virDomainLeaseDefFree global (rhbz#802851)
  - qemu: Don't 'remove' hostdev objects from domain if operation fails (rhbz#802851)
  - util: Eliminate device object leaks related to virDomain*Remove*() (rhbz#802851)
  - virsh: Fix invalid free (rhbz#803591)
  - qemu: Eliminate memory leak in qemuDomainUpdateDeviceConfig (rhbz#802854)
  - qemu: Support persistent hotplug of <hostdev> devices (rhbz#802856)
  - qemu: Fix segfault when detaching non-existent network device (rhbz#802644)
  - remote: Fix migration leaks (rhbz#798497)
  - virsh: Trim aliases from -h output (rhbz#796526)
  - Fix handling of blkio deviceWeight empty string (rhbz#804028)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-7.el6
changelog:
  - snapshot: Make quiesce a bit safer (rhbz#804210)
  - python: Avoid memory leaks on libvirt_virNodeGetMemoryStats (rhbz#770944)
  - qemu: Use unlimited speed when migrating to file (rhbz#740099)
  - qemu: Add support for domain cleanup callbacks (rhbz#795305)
  - qemu: Avoid dangling migration-in job on shutoff domains (rhbz#795305)
  - qemu: Add connection close callbacks (rhbz#795305)
  - qemu: Make autodestroy utilize connection close callbacks (rhbz#795305)
  - qemu: Avoid dangling migration-out job when client dies (rhbz#795305)
  - python: Avoid memory leaks on libvirt_virNodeGetCPUStats (rhbz#770943)
  - util: Consolidate duplicated error messages in virnetlink.c (rhbz#693842)
  - python: Add virDomainGetCPUStats python binding API (rhbz#800366)
  - snapshot: Add qemu capability for 'transaction' command (rhbz#782457)
  - snapshot: Add atomic create flag (rhbz#782457)
  - snapshot: Make offline qemu snapshots atomic (rhbz#782457)
  - snapshot: Rudimentary qemu support for atomic disk snapshot (rhbz#782457)
  - snapshot: Add support for qemu transaction command (rhbz#782457)
  - snapshot: Wire up qemu transaction command (rhbz#782457)
  - snapshot: Improve qemu handling of reused snapshot targets (rhbz#782457)
  - Clarify virsh freecell manpage entry (rhbz#698521)
  - Add support for event tray moved of removable disks (rhbz#575160)
  - docs: Add documentation for new attribute tray of disk target (rhbz#575160)
  - conf: Parse and for the tray attribute (rhbz#575160)
  - qemu: Do not start with source for removable disks if tray is open (rhbz#575160)
  - qemu: Prohibit setting tray status as open for block type disk (rhbz#575160)
  - qemu: Update tray status while tray moved event is emitted (rhbz#575160)
  - build: Fix incorrect enum declaration (rhbz#575160)
  - spec: Add missed dependancy for numad (rhbz#769930)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-9.el6
changelog:
  - qemu: Avoid entering monitor with locked driver (rhbz#803186)
  - snapshot: Don't pass NULL to QMP command creation (rhbz#807147)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-10.el6
changelog:
  - python: Add new helper functions for python to C conversion (rhbz#807751)
  - python: Make python APIs use these helper functions (rhbz#807751)
  - python: Improve conversion validation (rhbz#807751)
  - qemu_agent: Issue guest-sync prior to every command (rhbz#808527)
  - qemu: Fix memory leak in virDomainGetVcpus (rhbz#808979)
  - qemu: Reflect any memory rounding back to xml (rhbz#808522)
  - conf: Allow fuzz in XML with cur balloon > max (rhbz#808522)
  - qemu: Start nested job in qemuDomainCheckEjectableMedia (rhbz#803186)
  - virsh: Clarify escape sequence (rhbz#808652)
  - virsh: Plug memory leaks on failure path (rhbz#807555)
  - conf: Prevent crash of libvirtd without channel target name (rhbz#808371)
  - qemu: Don't leak temporary list of USB devices (rhbz#808459)
  - qemu: Delete USB devices used by domain on stop (rhbz#808459)
  - qemu: Build activeUsbHostdevs list on process reconnect (rhbz#808459)
  - qemu: Fix virtio+macvtap migration from 6.3 to older hosts (rhbz#806633)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-11.el6
changelog:
  - test: Fix segfault in networkxml2argvtest (rhbz#810100)
  - conf: Plug memory leaks on virDomainDiskDefParseXML (rhbz#575160)
  - qemu_ga: Don't overwrite errors on FSThaw (rhbz#808527)
  - Fix parallel build in docs/ directory (rhbz#810559)
  - qemu: Make migration fail when port profile association fails on the dst host (rhbz#811026)
  - Wire up <loader> to set the QEMU BIOS path (rhbz#811227)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-12.el6
changelog:
  - blockjob: Add qemu capabilities related to block pull jobs (rhbz#811683)
  - blockjob: Add API for async virDomainBlockJobAbort (rhbz#811683)
  - blockjob: Optimize JSON event handler lookup (rhbz#811683)
  - blockjob: Wire up qemu async virDomainBlockJobAbort (rhbz#811683)
  - blockjob: Allow for fast-finishing job (rhbz#811683)
  - virsh: Minor syntactic cleanups (rhbz#811683)
  - qemu: Use consistent error when qemu binary is too old (rhbz#811683)
  - blockjob: Add virsh blockpull --wait (rhbz#811683)
  - qemu: Fix deadlock when qemuDomainOpenConsole cleans up a connection (rhbz#811497)
  - qemu: Fix deadlock when qemuDomainOpenConsole cleans up a connection (rhbz#811497)
  - qemu: Fix mem leak in qemuProcessInitCpuAffinity (rhbz#810157)
  - numad: Convert node list to cpumap before setting affinity (rhbz#810157)
  - numad: Ignore cpuset if placement is auto (rhbz#810157)
  - conf: Do not parse cpuset only if the placement is auto (rhbz#810157)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-13.el6
changelog:
  - Fix a problem in the patchset, rhbz#811497 one was applied twice in -12
  - qemu, util: On restart of libvirt restart vepa callbacks (rhbz#812430)
  - qemu, util: Fix netlink callback registration for migration (rhbz#812430)
  - util: Only register callbacks for CREATE operations in virnetdevmacvlan.c (rhbz#812430)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-14.el6
changelog:
  - blockjob: Add new API flags (rhbz#638506)
  - blockjob: Add 'blockcopy' to virsh (rhbz#638506)
  - blockjob: Enhance xml to track mirrors across libvirtd restart (rhbz#638506)
  - blockjob: React to active block copy (rhbz#638506)
  - blockjob: Add qemu capabilities related to block jobs (rhbz#638506)
  - blockjob: Return appropriate event and info (rhbz#638506)
  - blockjob: Support pivot operation on cancel (rhbz#638506)
  - blockjob: Make drive-reopen safer (rhbz#638506)
  - blockjob: Implement block copy for qemu (rhbz#638506)
  - blockjob: Allow for existing files (rhbz#638506)
  - blockjob: Allow mirroring under SELinux (rhbz#638506)
  - blockjob: Accommodate RHEL backport names (rhbz#638506)
  - virsh: Avoid strtol (rhbz#813972)
  - conf: Tighten up XML integer parsing (rhbz#813972)
  - snapshot: Fix memory leak on error (rhbz#782457)
  - virsh: Avoid uninitialized memory usage (rhbz#814080)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-15.el6
changelog:
  - qemu: Improve errors related to offline domains (rhbz#816662)
  - blockjob: Check for active vm before checking blockcopy bits (rhbz#816662)
  - qemu: Preserve original error during migration (rhbz#807907)
  - rpc: Discard non-blocking calls only when necessary (rhbz#807907)
  - qemu: Fix detection of failed migration (rhbz#807907)
  - qemu: Avoid bogus error at the end of tunnelled migration (rhbz#807907)
  - qemu: Make sure qemu can access its directory in hugetlbfs (rhbz#815206)
  - virsh: Fix docs for list command (rhbz#814021)
  - virsh: Fix and clarify the --title flag for the list command in man page (rhbz#814021)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-16.el6
changelog:
  - qemuOpenFile: Don't force chown on NFS (rhbz#810241)
  - util: Fix crash when starting macvtap interfaces (rhbz#815270)
  - qemu: Fix segfault when host CPU is empty (rhbz#817078)
  - blockjob: Allow speed setting in block copy (rhbz#815791)
  - blockjob: Fix block-stream bandwidth race (rhbz#815791)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-17.el6
changelog:
  - qemu: Don't modify domain on failed blockiotune (rhbz#819014)
  - qemu: Reject blockiotune if qemu too old (rhbz#819014)
  - qemu: Don't use virDomainDefFormat* directly (rhbz#815503)
  - qemu: Emit compatible XML when migrating a domain (rhbz#815503)
  - usb: Create functions to search usb device accurately (rhbz#815755)
  - qemu: Call usb search function for hostdev initialization and hotplug (rhbz#815755)
  - virsh: Avoid heap corruption leading to virsh abort (rhbz#819636)
  - util: Fix libvirtd startup failure due to netlink error (rhbz#816465)
  - util: Allow specifying both src and dst pid in virNetlinkCommand (rhbz#816465)
  - util: Function to get local nl_pid used by netlink event socket (rhbz#816465)
  - util: Set src_pid for virNetlinkCommand when appropriate (rhbz#816465)
  - domain_conf: Add "usbredir" to list of valid spice channels (rhbz#819498)
  - domain_conf: Add "default" to list of valid spice channels (rhbz#819499)
  - snapshot: Allow block devices past cgroup (rhbz#810200)
  - blockjob: Allow block devices past cgroup (rhbz#810200)
  - util: Avoid libvirtd crash in virNetDevTapCreate (rhbz#817234)
  - python: Fix the forward_null error in Python binding codes (rhbz#771021)
  - xen: Fix resource leak in xen driver (rhbz#771021)
  - test: Fix resource leak in test driver (rhbz#771021)
  - node: Fix resource leak in nodeinfo.c (rhbz#771021)
  - virnet: Fix resource leak in virnetlink.c (rhbz#771021)
  - vmx: Fix resource leak (rhbz#771021)
  - qemu: Fix resource leak (rhbz#771021)
  - uuid: Fix possible non-terminated string (rhbz#771021)
  - node_device: Fix possible non-terminated string (rhbz#771021)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-18.el6
changelog:
  - numad: Set memory policy from numad advisory nodeset (rhbz#810157)
  - numad: Copy 'placement' of <numatune> to <vcpu> by default (rhbz#810157)
  - numad: Always output 'placement' of <vcpu> (rhbz#810157)
  - qemu: Avoid the memory allocation and freeing (rhbz#810157)
  - numad: Divide cur_balloon by 1024 before passing it to numad (rhbz#810157)
  - numad: Check numactl-devel if compiled with numad support (rhbz#810157)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-19.el6
changelog:
  - build: Fix the typo in configure.ac (rhbz#820461)
  - qemu: Fix build when !HAVE_NUMACTL (rhbz#820461)
  - usb: Fix crash when failing to attach a second usb device (rhbz#815755)
  - qemu: Use the CPU index in capabilities to map NUMA node to cpu list. (rhbz#820461)
  - qemu: Set memory policy using cgroup if placement is auto (rhbz#820461)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-20.el6
changelog:
  - Fix virDomainDeviceInfoIsSet() to check all struct fields (rhbz#820869)
  - Fix logic for assigning PCI addresses to USB2 companion controllers (rhbz#820869)
  - Set a sensible default master start port for ehci companion controllers (rhbz#820869)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-21.el6
changelog:
  - qemu: Rollback on used USB devices (rhbz#743671)
  - qemu: Don't delete USB device on failed qemuPrepareHostdevUSBDevices (rhbz#743671)
  - Revert "rpc: Discard non-blocking calls only when necessary" (rhbz#821468)


author: Eric Blake <eblake@redhat.com> - libvirt-0.9.10-21.el6_3.1
changelog:
  - avoid closing uninitialized fd (rhbz#827050)
  - avoid fd leak (rhbz#827050)
  - command: avoid double close bugs (rhbz#827050)
  - fdstream: avoid double close bug (rhbz#827050)
  - command: check for fork error before closing fd (rhbz#827050)
  - qemu: avoid closing fd more than once (rhbz#827050)
  - Disable keepalives by default (rhbz#832184)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.13-1.el6
changelog:
  - first rebase for 6.4 more to come
  - kvm-guest failed to start; double-close bug in libvirt (rhbz#823716)
  - potential to deadlock libvirt on EPIPE (rhbz#827234)
  - fix keepalive issues (rhbz#832081)
  - CPU topology parsing bug on special NUMA platform (rhbz#828729)
  - libvirtd will crash when tight loop of hotplug/unplug PCI device (rhbz#822373)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.10.0-0rc0.el6
changelog:
  - New build based on upstream snapshot 0.10.0-0rc0 (rhbz#836934)
  - Cleanup and rebase of the few RHEL-only patches


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.10.0-1.el6
changelog:
  - New build based on upstream release 0.10.0 (rhbz#836934)
  - agent: add qemuAgentArbitraryCommand() for general qemu agent command
  - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
  - network: use firewalld instead of iptables, when available
  - network: make network driver vlan-aware
  - esx: Implement network driver
  - Various LXC improvements
  - Add virDomainGetHostname
  - a lot of bug fixes, improvements and portability work


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.10.2-1.el6
changelog:
  - New build based on upstream release 0.10.2 (rhbz#836934)
  - network: define new API virNetworkUpdate
  - add support for QEmu sandbox support
  - blockjob: add virDomainBlockCommit
  - New APIs to get/set Node memory parameters
  - new API virConnectListAllSecrets
  - new API virConnectListAllNWFilters
  - new API virConnectListAllNodeDevices
  - new API virConnectListAllInterfaces
  - new API virConnectListAllNetworks
  - new API virStoragePoolListAllVolumes
  - Add PMSUSPENDED life cycle event
  - new API virStorageListAllStoragePools
  - Add per-guest S3/S4 state configuration
  - qemu: Support for Block Device IO Limits
  - a lot of bug fixes, improvements and portability work


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-2.el6
changelog:
  - qemu: Wait for SPICE to migrate (rhbz#836135)
  - lxc: Correctly report active cgroups (rhbz#860907)
  - network: Backend for virNetworkUpdate of interface list (rhbz#844404)
  - Fix start of containers with custom root filesystem (rhbz#861564)
  - Correct checking of virStrcpyStatic() return value (rhbz#864122)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-3.el6
changelog:
  - conf: Rename life cycle actions to event actions (rhbz#832156)
  - conf: Add on_lockfailure event configuration (rhbz#832156)
  - locking: Add const char * parameter to avoid ugly typecasts (rhbz#832156)
  - locking: Pass hypervisor driver name when acquiring locks (rhbz#832156)
  - locking: Add support for lock failure action (rhbz#832156)
  - locking: Implement lock failure action in sanlock driver (rhbz#832156)
  - conf: Add support for startupPolicy for USB devices (rhbz#843560)
  - qemu: Introduce qemuFindHostdevUSBDevice (rhbz#843560)
  - qemu: Add option to treat missing USB devices as success (rhbz#843560)
  - qemu: Implement startupPolicy for USB passed through devices (rhbz#843560)
  - Add MIGRATABLE flag for virDomainGetXMLDesc (rhbz#843560)
  - qemu: Make save/restore with USB devices usable (rhbz#843560)
  - conf: Mark missing optional USB devices in domain XML (rhbz#843560)
  - security: Also parse user/group names instead of just IDs for DAC labels (rhbz#860519)
  - doc: Update description about security labels on formatdomain.html (rhbz#860519)
  - util: Extend virGetUserID and virGetGroupID to support names and IDs (rhbz#860519)
  - security: Update user and group parsing in security_dac.c (rhbz#860519)
  - doc: Update description about user/group in qemu.conf (rhbz#860519)
  - Fix kvm_pv_eoi with kvmclock (rhbz#860971)
  - Change qemuSetSchedularParameters to use AFFECT_CURRENT (rhbz#852260)
  - Fix handling of itanium arch name in QEMU driver (rhbz#863115)
  - Add a qemu capabilities cache manager (rhbz#863115)
  - Switch over to use cache for building QEMU capabilities (rhbz#863115)
  - Remove probing of flags when launching QEMU guests (rhbz#863115)
  - Remove probing of machine types when canonicalizing XML (rhbz#863115)
  - Remove probing of CPU models when launching QEMU guests (rhbz#863115)
  - Make qemuCapsProbeMachineTypes & qemuCapsProbeCPUModels static (rhbz#863115)
  - Remove xenner support (rhbz#863115)
  - Refactor guest init to support qemu-system-i386 binary too (rhbz#863115)
  - Add a qemuMonitorGetVersion() method for QMP query-version command (rhbz#863115)
  - Add a qemuMonitorGetMachines() method for QMP query-machines command (rhbz#863115)
  - Add a qemuMonitorGetCPUDefinitions method for QMP query-cpu-definitions command (rhbz#863115)
  - Add a qemuMonitorGetCommands() method for QMP query-commands command (rhbz#863115)
  - Add a qemuMonitorGetEvents() method for QMP query-events command (rhbz#863115)
  - Add a qemuMonitorGetObjectTypes() method for QMP qom-list-types command (rhbz#863115)
  - Add a qemuMonitorGetObjectProps() method for QMP device-list-properties command (rhbz#863115)
  - Add a qemuMonitorGetTargetArch() method for QMP query-target command (rhbz#863115)
  - Remove some unused includes in QEMU code (rhbz#863115)
  - Move command/event capabilities detection out of QEMU monitor code (rhbz#863115)
  - Fix regression starting QEMU instances without query-events (rhbz#863115)
  - Refactor qemuCapsParseDeviceStr to work from data tables (rhbz#863115)
  - Fix QEMU test with 1.2.0 help output (rhbz#863115)
  - Ignore error from query-cpu-definitions (rhbz#863115)
  - Fix potential deadlock when agent is closed (rhbz#859712)
  - Fix (rare) deadlock in QEMU monitor callbacks (rhbz#859712)
  - Convert virLXCMonitor to use virObject (rhbz#864336)
  - Remove pointless virLXCProcessMonitorDestroy method (rhbz#864336)
  - Simplify some redundant locking while unref'ing objects (rhbz#859712)
  - Fix deadlock in handling EOF in LXC monitor (rhbz#864336)
  - Avoid bogus I/O event errors when closing the QEMU monitor (rhbz#859712)
  - qemu: Fix parsing of x86 CPU models (rhbz#864097)
  - python: Keep consistent handling of Python integer conversion (rhbz#816609)
  - esx: Fix and improve esxListAllDomains function (rhbz#864384)
  - virsh: Block SIGINT while getting BlockJobInfo (rhbz#845448)
  - spec: Add support for libssh2 transport (rhbz#513363)
  - Revert "Use XDG Base Directories instead of storing in home directory" (rhbz#859331)
  - doc: Sort out the relationship between <vcpu>, <vcpupin>, and <emulatorpin> (rhbz#855218)
  - conf: Ignore vcpupin for not onlined vcpus when parsing (rhbz#855218)
  - conf: Initialize the pinning policy for vcpus (rhbz#855218)
  - qemu: Create or remove cgroup when doing vcpu hotpluging (rhbz#857013)
  - qemu: Initialize cpuset for hotplugged vcpu as def->cpuset (rhbz#855218)
  - conf: Ignore emulatorpin if vcpu placement is auto (rhbz#855218)
  - qemu: Ignore def->cpumask if emulatorpin is specified (rhbz#855218)
  - Avoid straying </cpuset> (rhbz#855218)
  - conf: Fix virDevicePCIAddressEqual args (rhbz#805071)
  - conf: VirDomainDeviceInfoCopy utility function (rhbz#805071)
  - qemu: Reorganize qemuDomainChangeNet and qemuDomainChangeNetBridge (rhbz#805071)
  - Add support for SUSPEND_DISK event (rhbz#839661)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-4.el6
changelog:
  - node_memory: Add new parameter field to tune the new sysfs knob (rhbz#840113)
  - daemon: Fix removing abstract namespaces (rhbz#859331)
  - tests: Fix domain-events python test (rhbz#839661)
  - conf: Fix crash with cleanup (rhbz#866288)
  - spec: Add runtime requirement for libssh2 (rhbz#866508)
  - spec: Require newer sanlock on recent distros (rhbz#832156)
  - spec: Require newer sanlock on recent distros 2 (rhbz#832156)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-5.el6
changelog:
  - qemu: Clear async job when p2p migration fails early (rhbz#867412)
  - qemu: Pin the emulator when only cpuset is specified (rhbz#867372)
  - qemu: Correctly wait for spice to migrate (rhbz#867724)
  - qemu: Fixed default machine detection in qemuCapsParseMachineTypesStr (rhbz#867764)
  - conf: Make tri-state feature options more universal (rhbz#864606)
  - conf: Add support for HyperV Enlightenment features (rhbz#864606)
  - qemu: Add support for HyperV Enlightenment feature "relaxed" (rhbz#864606)
  - network: Set to NULL after virNetworkDefFree() (rhbz#866364)
  - qemu: Always format CPU topology (rhbz#866999)
  - qemu: Don't fail without emulatorpin or cpumask (rhbz#867372)
  - qemu: Allow migration with host USB devices (rhbz#843560)
  - qemu: Do not require hostuuid in migration cookie (rhbz#863059)
  - network: Free/null newDef if network fails to start (rhbz#866364)
  - migrate: v2: Use VIR_DOMAIN_XML_MIGRATABLE when available (rhbz#856864)
  - qemu: Avoid holding the driver lock in trivial snapshot API's (rhbz#772088)
  - storage: List more file types (rhbz#772088)
  - storage: Treat 'aio' like 'raw' at parse time (rhbz#772088)
  - storage: Match RNG to supported driver types (rhbz#772088)
  - storage: Use enum for default driver type (rhbz#772088)
  - storage: Use enum for disk driver type (rhbz#772088)
  - storage: Use enum for snapshot driver type (rhbz#772088)
  - storage: Don't probe non-files (rhbz#772088)
  - storage: Get entire metadata chain in one call (rhbz#772088)
  - storage: Don't require caller to pre-allocate metadata struct (rhbz#772088)
  - storage: Remember relative names in backing chain (rhbz#772088)
  - storage: Make it easier to find file within chain (rhbz#772088)
  - storage: Cache backing chain while qemu domain is live (rhbz#772088)
  - storage: Use cache to walk backing chain (rhbz#772088)
  - blockjob: Remove unused parameters after previous patch (rhbz#772088)
  - blockjob: Manage qemu block-commit monitor command (rhbz#772088)
  - blockjob: Wire up online qemu block-commit (rhbz#772088)
  - blockjob: Implement shallow commit flag in qemu (rhbz#772088)
  - blockjob: Refactor qemu disk chain permission grants (rhbz#772088)
  - blockjob: Properly label disks for qemu block-commit (rhbz#772088)
  - blockjob: Avoid segv on early error (rhbz#772088)
  - blockjob: Accommodate early RHEL backport naming (rhbz#772088)
  - virsh: Fix segfault of snapshot-list (rhbz#837544)
  - network: Always create dnsmasq hosts and addnhosts files, even if empty (rhbz#868389)
  - network: Don't allow multiple default portgroups (rhbz#868483)
  - selinux: Use raw contexts (rhbz#851981)
  - selinux: Add security selinux function to label tapfd (rhbz#851981)
  - selinux: Use raw contexts 2 (rhbz#851981)
  - selinux: Fix wrong tapfd relablling (rhbz#851981)
  - selinux: Remove unused variables in socket labelling (rhbz#851981)
  - selinux: Relabel tapfd in qemuPhysIfaceConnect (rhbz#851981)
  - storage: Let format probing work on root-squash NFS (rhbz#856247)
  - snapshot: Sanity check when reusing file for snapshot (rhbz#856247)
  - blockjob: Add qemu capabilities related to block jobs (rhbz#856247)
  - blockjob: React to active block copy (rhbz#856247)
  - blockjob: Return appropriate event and info (rhbz#856247)
  - blockjob: Support pivot operation on cancel (rhbz#856247)
  - blockjob: Make drive-reopen safer (rhbz#856247)
  - blockjob: Implement block copy for qemu (rhbz#856247)
  - blockjob: Allow for existing files in block-copy (rhbz#856247)
  - blockjob: Allow mirroring under SELinux and cgroup (rhbz#856247)
  - blockjob: Relabel entire existing chain (rhbz#856247)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-6.el6
changelog:
  - xml: Omit domain name from comment if it contains double hyphen (rhbz#868692)
  - cpu: Add recently added cpu feature flags. (rhbz#797283)
  - esx: Update version checks for vSphere 5.1 (rhbz#865670)
  - qemu: Add helper to prepare cpumap for affinity setting (rhbz#869096)
  - qemu: Keep the affinity when creating cgroup for emulator thread (rhbz#869096)
  - qemu: Prohibit chaning affinity of domain process if placement is 'auto' (rhbz#870099)
  - network: Fix networkValidate check for default portgroup and vlan (rhbz#868483)
  - qemu: Fix attach/detach of netdevs with matching mac addrs (rhbz#862515)
  - snapshot: Improve snapshot-list error message (rhbz#869100)
  - virsh: Remove --flags from nodesuspend (rhbz#869508)
  - virsh: Fix POD syntax (rhbz#870273)
  - xml: Print uuids in the warning (rhbz#868692)
  - blockjob: Support both RHEL and upstream qemu drive-mirror (rhbz#871055)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-7.el6
changelog:
  - sanlock: Introduce 'user' and 'group' conf variables (rhbz#820173)
  - esx: Fix connection to ESX 5.1 (rhbz#865670)
  - cpu: Fix definition of flag smap (rhbz#797283)
  - util: Do a better job of matching up pids with their binaries (rhbz#871201)
  - qemu: Fix EmulatorPinInfo without emulatorpin (rhbz#871312)
  - build: Fix RPM build for non-x86 platforms (rhbz#820173)
  - qemu: Report errors from iohelper (rhbz#866369)
  - build: Fix linking with systemtap probes (rhbz#866369)
  - iohelper: Fdatasync() at the end (rhbz#866369)
  - net-update docs: S/domain/network/ (rhbz#872104)
  - cpu: Add newly added cpu flags (rhbz#838127)
  - cpu: Add AMD Opteron G5 cpu model (rhbz#838127)
  - cpu: Add Intel Haswell cpu model (rhbz#843087)
  - snapshot: New XML for external system checkpoint (rhbz#638512)
  - snapshot: Improve disk align checking (rhbz#638512)
  - snapshot: Populate new XML info for qemu snapshots (rhbz#638512)
  - snapshot: Merge pre-snapshot checks (rhbz#638512)
  - qemu: Fix possible race when pausing guest (rhbz#638512)
  - qemu: Clean up snapshot retrieval to use the new helper (rhbz#638512)
  - qemu: Split out domain memory saving code to allow reuse (rhbz#638512)
  - snapshot: Add flag to enable creating checkpoints in live state (rhbz#638512)
  - snapshot: qemu: Add async job type for snapshots (rhbz#638512)
  - snapshot: qemu: Rename qemuDomainSnapshotCreateActive (rhbz#638512)
  - snapshot: qemu: Add support for external checkpoints (rhbz#638512)
  - snapshot: qemu: Remove restrictions preventing external checkpoints (rhbz#638512)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-8.el6
changelog:
  - iohelper: Don't report errors on special FDs (rhbz#866369)
  - esx: Yet another connection fix for 5.1 (rhbz#873538)
  - qemu: Don't corrupt pointer in qemuDomainSaveMemory() (rhbz#873537)
  - build: Place attributes in correct location (rhbz#873934)
  - Introduce new VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR event (rhbz#866388)
  - qemu: Emit event if 'cont' fails (rhbz#866388)
  - virsh: Make ,, escape parsing common (rhbz#874171)
  - virsh: Add snapshot-create-as memspec support (rhbz#874171)
  - qemu: Fix domain ID numbering race condition (rhbz#874330)
  - qemu: Allow migration to be cancelled at prepare phase (rhbz#873792)
  - AbortJob: Fix documentation (rhbz#873792)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-9
changelog:
  - util: Improve error reporting from absolutePathFromBaseFile helper (rhbz#874860)
  - storage: Fix broken backing chain (rhbz#874860)
  - nodeinfo: Add check and workaround to guarantee valid cpu topologies (rhbz#874050)
  - nodeinfotest: Add test data for 2 processor host with broken NUMA (rhbz#874050)
  - nodeinfotest: Add test data from a AMD bulldozer machine. (rhbz#874050)
  - virsh: save: Report an error if XML file can't be read (rhbz#876868)
  - virsh: Fix uninitialized variable in cmdSnapshotEdit (rhbz#877303)
  - qemu: Allow larger discrepency between memory & currentMemory in domain xml (rhbz#873134)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-10
changelog:
  - Add note about numeric domain names to manpage (rhbz#824253)
  - Use virNetServerRun instead of custom main loop (rhbz#867246)
  - qemu: Fix RBD attach regression (rhbz#878862)
  - qemu: Stop recursive detection of image chains when an image is missing (rhbz#878862)
  - Fix exiting of libvirt_lxc program on container quit (rhbz#879360)
  - snapshot: qemu: Add support for external inactive snapshots (rhbz#876816)
  - conf: Fix private symbols exported by files in conf (rhbz#876816)
  - snapshot: qemu: Fix detection of external snapshots when deleting (rhbz#876816)
  - snapshot: Require user to supply external memory file name (rhbz#876816)
  - snapshot: Add two more filter sets to API (rhbz#876817)
  - snapshot: Add virsh back-compat support for new filters (rhbz#876817)
  - snapshot: Implement new filter sets (rhbz#876817)
  - snapshot: Expose location through virsh snapshot-info (rhbz#876817)
  - sanlock: Retry after EINPROGRESS (rhbz#820173)
  - storage: Fix logical volume cloning (rhbz#879780)
  - cpu: Add Intel Haswell cpu model (fix previous downstream definition) (rhbz#879282)
  - virsh: Report error when taking a snapshot with empty --memspec argument (rhbz#879130)
  - lxc: Don't crash if no security driver is specified in libvirt_lxc (rhbz#880064)
  - lxc: Avoid segfault of libvirt_lxc helper on early cleanup paths (rhbz#880064)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-11
changelog:
  - Fix uninitialized variable in virLXCControllerSetupDevPTS (rhbz#880064)
  - storage: Fix device detach regression with cgroup ACLs (rhbz#876828)
  - storage: Fix bug of fs pool destroying (rhbz#878400)
  - qemu: Fix a crash when save file can't be opened (rhbz#880919)
  - bitmap: Fix typo to use UL type of integer constant in virBitmapIsAllSet (rhbz#876415)
  - virsh: Rewrite cmdDomDisplay (rhbz#878779)
  - network: Fix crash when portgroup has no name (rhbz#879473)
  - util: Capabilities detection for dnsmasq (rhbz#882265)
  - util: New virSocketAddrIsPrivate function (rhbz#882265)
  - network: Use dnsmasq --bind-dynamic when available (rhbz#882265)
  - storage: Fix scsi detach regression with cgroup ACLs (rhbz#876828)
  - libssh2_session: Support DSS keys as well (rhbz#878376)
  - virsh: Fix error messages in iface-bridge (rhbz#878376)
  - virsh: Check the return value of virStoragePoolGetAutostart (rhbz#878376)
  - conf: Check the return value of virXPathNodeSet (rhbz#878376)
  - conf: snapshot: Check return value of virDomainSnapshotObjListNum (rhbz#878376)
  - util: Fix virBitmap allocation in virProcessInfoGetAffinity (rhbz#878376)
  - virsh: Use correct sizeof when allocating cpumap (rhbz#878376)
  - rpc: Don't destroy xdr before creating it in virNetMessageEncodeHeader (rhbz#878376)
  - virsh: Do timing even for unusable connections (rhbz#878376)
  - conf: Fix uninitialized variable in virDomainListSnapshots (rhbz#878376)
  - Fix error handling in virSecurityManagerGetMountOptions (rhbz#878376)
  - conf: Prevent crash with no uuid in cephx auth secret (rhbz#878376)
  - conf: Fix virDomainNetGetActualDirect*() and BridgeName() (rhbz#881480)
  - virsh: Report errors if arguments of the schedinfo command are incorrect (rhbz#882915)
  - systemd: Require dbus service (rhbz#830201)
  - spec: Require dbus-daemon when using libvirtd in Fedora (rhbz#830201)
  - qemu: Don't free PCI device if adding it to activePciHostdevs fails (rhbz#877095)
  - util: Slightly refactor PCI list functions (rhbz#877095)
  - qemu: Fix memory (and FD) leak on PCI device detach (rhbz#877095)
  - util: Do not keep PCI device config file open (rhbz#877095)
  - node_memory: Improve the docs (rhbz#872656)
  - node_memory: Do not fail if there is parameter unsupported (rhbz#872656)
  - node_memory: Fix bug of node_memory_tune (rhbz#872656)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-12
changelog:
  - qemu: Eliminate bogus error log when changing netdev's bridge (rhbz#885838)
  - remote: Avoid the thread race condition (rhbz#866524)
  - storage: Error out earlier if the volume target path already exists (rhbz#832302)
  - dnsmasq: Fix parsing of the version number (rhbz#885727)
  - qemu: Restart CPUs with valid async job type when doing external snapshots (rhbz#885081)
  - examples: Fix balloon event callback (rhbz#884650)
  - util: Don't fail virGetGroupIDByName when group not found (rhbz#883832)
  - util: Don't fail virGetUserIDByName when user not found (rhbz#883832)
  - util: Rework error reporting in virGet(User|Group)IDByName (rhbz#883832)
  - util: Fix warning message in previous patch (rhbz#883832)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-13
changelog:
  - network: Prevent dnsmasq from listening on localhost (rhbz#886821)
  - sanlock: Re-add lockspace unconditionally (rhbz#820173)
  - Fix "virsh create" example (rhbz#887187)
  - docs: Fix some typos in examples (rhbz#887187)
  - network: Don't require private addresses if dnsmasq uses SO_BINDTODEVICE (rhbz#882265)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-14
changelog:
  - util: Add missing error log messages when failing to get netlink VFINFO (rhbz#889319)
  - util: Fix functions that retrieve SRIOV VF info (rhbz#889319)
  - util: Fix botched check for new netlink request filters (rhbz#889319)
  - blockjob: Fix memleak that prevented block pivot (rhbz#888426)
  - sanlock: Chown lease files as well (rhbz#820173)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-15
changelog:
  - snapshot: conf: Make virDomainSnapshotIsExternal more reusable (rhbz#889407)
  - snapshot: qemu: Separate logic blocks with newlines (rhbz#889407)
  - snapshot: qemu: Fix segfault and vanishing snapshots when redefining (rhbz#889407)
  - snapshot: qemu: Allow redefinition of external snapshots (rhbz#889407)
  - util: Prepare helpers for unpriv_sgio setting (rhbz#878578)
  - qemu: Add a hash table for the shared disks (rhbz#878578)
  - docs: Add docs and rng schema for new XML tag sgio (rhbz#878578)
  - conf: Parse and format the new XML (rhbz#878578)
  - qemu: Set unpriv_sgio when starting domain and attaching disk (rhbz#878578)
  - qemu: Check if the shared disk's cdbfilter conflicts with others (rhbz#878578)
  - qemu: Relax hard RSS limit (rhbz#891653)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-16
changelog:
  - qemu_agent: Remove agent reference only when disposing it (rhbz#892079)
  - Add RESUME event listener to qemu monitor. (rhbz#894085)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-17
changelog:
  - storage: Fix lvcreate parameter for backingStore. (rhbz#896398)
  - qemu: Don't return success if creation of snapshot save file fails (rhbz#896403)
  - qemu: Reject attempts to create snapshots with names containig '/' (rhbz#896403)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-18
changelog:
  - rpc: Fix crash on error paths of message dispatching (CVE-2013-0170)
  - spec: Disable libssh2 support (rhbz#513363)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-19
changelog:
  - xen: Resolve resource leak with 'cpuset' (rhbz#888503)
  - schema: Make the cpuset type reusable across schema files (rhbz#888503)
  - schemas: Add schemas for more CPU topology information in the caps XML (rhbz#888503)
  - conf: Split out NUMA topology formatting to simplify access to data (rhbz#888503)
  - capabilities: Switch CPU data in NUMA topology to a struct (rhbz#888503)
  - capabilities: Add additional data to the NUMA topology info (rhbz#888503)
  - test: Add support for thread and core information for the test driver (rhbz#888503)
  - xen: Initialize variable before using (rhbz#888503)
  - xen: Actually fix the uninitialized variable (rhbz#888503)
  - spice: Properly reserve tlsPort when no port specified (rhbz#913244)
  - qemu_agent: Ignore expected EOFs (rhbz#892079)
  - qemu: Nicer error message if live disk snapshot unsupported (rhbz#882077)
  - qemu: Destroy domain on decompression binary error (rhbz#894723)
  - qemu: Run lzop with '--ignore-warn' (rhbz#894723)
  - Don't ignore return value of qemuProcessKill (rhbz#903238)
  - Fix race condition when destroying guests (rhbz#903238)
  - Log warning if storage magic matches, but version does not (rhbz#903248)
  - Add lots of debugging to storage file probing code (rhbz#903248)
  - Fix probing of QED file format (rhbz#903248)
  - util: Add virendian.h macros (rhbz#903248)
  - util: Use new virendian.h macros (rhbz#903248)
  - storage: Rearrange functions (rhbz#903248)
  - storage: Prepare for refactoring (rhbz#903248)
  - storage: Refactor metadata lookup (rhbz#903248)
  - storage: Don't follow backing chain symlinks too eagerly (rhbz#903248)
  - storage: Test backing chain traversal (rhbz#903248)
  - qemu: Check backing chains even when cgroup is omitted (rhbz#896013)
  - python: Fix bindings for virDomainSnapshotGet{Domain,Connect} (rhbz#895882)
  - qemu: Add checking in helpers for sgio setting (rhbz#908073)
  - qemu: Merge qemuCheckSharedDisk into qemuAddSharedDisk (rhbz#908073)
  - qemu: Record names of domain which uses the shared disk in hash table (rhbz#908073)
  - qemu: Update shared disk table when reconnecting qemu process (rhbz#908073)
  - qemu: Move the shared disk adding and sgio setting prior to attaching (rhbz#908073)
  - qemu: Remove the shared disk entry if the operation is ejecting or updating (rhbz#908073)
  - qemu: Fix the memory leak (rhbz#908073)
  - Fix crash changing CDROM media (rhbz#908073)
  - qemu: Avoid NULL dereference in qemuSharedDiskEntryFree (rhbz#908073)
  - qemu: Do not set unpriv_sgio if neither supported nor requested (rhbz#914677)
  - Use size_t instead of int for virDomainDefPtr struct (rhbz#896604)
  - util: Add VIR_(APPEND|INSERT|DELETE)_ELEMENT (rhbz#896604)
  - qemu: Fix QMP detection of QXL graphics (rhbz#896604)
  - qemu: Add qemu vga devices caps and one cap to mark them usable (rhbz#896604)
  - conf: Add optional attribte primary to video <model> element (rhbz#896604)
  - qemu: Use newer -device video device in qemu commandline (rhbz#896604)
  - tests: Add one -device video device testcase (rhbz#896604)
  - qemu: Detect VGA_QXL capability correctly (rhbz#896604)
  - qemu: Support ram bar size for qxl devices (rhbz#896604)
  - conf: Don't leak 'primary' video property on error (rhbz#896604)
  - storage: lvm: Don't overwrite lvcreate errors (rhbz#912179)
  - storage: lvm: Lvcreate fails with allocation=0, don't do that (rhbz#912179)
  - storage: Cleanup logical volume creation code (rhbz#912179)
  - docs: Clarify semantics of sparse storage volumes (rhbz#912179)
  - storage: Fix memory leak with regfree(reg) call. (rhbz#906299)
  - storage: Resource resource leak using 'tmp_vols' (rhbz#906299)
  - interface: Resolve resource leak wth 'tmp_iface_objs' (rhbz#906299)
  - locking: Resolve resource leaks on non error path (rhbz#906299)
  - selinux: Resolve resource leak using the default disk label (rhbz#906299)
  - storage: Resolve resource leaks with cmd processing (rhbz#906299)
  - domain_conf: Resolve resource leaks found by Valgrind (rhbz#906299)
  - qemu_command: Resolve resource leaks found by Valgrind (rhbz#906299)
  - storage: Need to add virCommandFree() (rhbz#906299)
  - qemu: Fix startupPolicy regression (rhbz#896013)
  - util: Retry NLM_F_REQUEST with different values of IFLA_EXT_MASK (rhbz#923963)
  - security_manager: Don't manipulate domain XML in virDomainDefGetSecurityLabelDef (rhbz#923946)
  - security: Don't add seclabel of type none if there's already a seclabel (rhbz#923946)
  - libvirt_private.syms: Correctly export seclabel APIs (rhbz#923946)
  - security_manager.c: Append seclabel iff generated (rhbz#923946)
  - rpc: Fix client crash when server drops connection (rhbz#921538)
  - storage: Fix volume cloning for logical volume. (rhbz#948678)
  - qemu: Allow migration over IPv6 (rhbz#846013)
  - qemu: Set IPv6 migration capability when dump-guest-core is present (rhbz#846013)
  - remote: Don't call NULL closeFreeCallback (rhbz#911609)
  - libvirt: Increase connection reference count for callbacks (rhbz#911609)
  - virsh: Unregister the connection close notifier upon termination (rhbz#911609)
  - virsh: Move cmdConnect from virsh-host.c to virsh.c (rhbz#911609)
  - virsh: Register and unregister the close callback also in cmdConnect (rhbz#911609)
  - rpc: Fix connection close callback race condition and memory corruption/crash (rhbz#911609)
  - tests: Fix qemumonitorjsontest deadlock when the machine is under load (rhbz#951227)
  - Avoid use of free'd memory in auto destroy callback (rhbz#950286)
  - Fix crash in QEMU auto-destroy with transient guests (rhbz#950286)
  - daemon: Fix leak after listing volumes (CVE-2013-1962)
  - Don't try to add non-existant devices to ACL (rhbz#922153)
  - Avoid spamming logs with cgroups warnings (rhbz#922153)
  - audit: Properly encode device path in cgroup audit (rhbz#922203)
  - qemu: Set correct migrate host in client_migrate_info (rhbz#920441)
  - qemu: Fix crash in migration of graphics-less guests. (rhbz#920441)
  - Fix F_DUPFD_CLOEXEC operation args (rhbz#961034)
  - cgroup: Be robust against cgroup movement races (rhbz#903433)
  - virsocket: Introduce virSocketAddrIsWildcard (rhbz#920441)
  - qemuDomainMigrateGraphicsRelocate: Use then new virSocketAddrIsWildcard (rhbz#920441)
  - virSocketAddrIsWildcard: Use IN6_IS_ADDR_UNSPECIFIED correctly (rhbz#920441)
  - libvirt: lxc: Don't mkdir when selinux is disabled (rhbz#915485)
  - Don't mount selinux fs in LXC if selinux is disabled (rhbz#915485)
  - virsh: Don't print --(null) in vol-name and vol-pool (rhbz#924571)
  - virsh: Fix docs for "virsh setmaxmem" (rhbz#924648)
  - qemu: Remove managed save flag from VM when starting with --force-boot (rhbz#917510)
  - qemu: Don't update count of vCPUs if hot-unplug has failed (rhbz#895424)
  - conf: net: Fix deadlock if assignment of network def fails (rhbz#921777)
  - RPC: Support up to 16384 cpus on the host and 4096 in the guest (rhbz#960683)
  - conf: Don't fail to parse <boot> when parsing a single device (rhbz#895294)
  - conf: Allow for non-contiguous device boot orders (rhbz#889961)
  - qemuDomainChangeGraphics: Check listen address change by listen type (rhbz#976401)
  - build: Fix build with -Werror (rhbz#976401)
  - qemuDomainBlockStatsFlags: Guard disk lookup with a domain job (rhbz#916315)
  - qemu: Don't fail to shutdown domains with unresponsive agent (rhbz#889635)
  - qemu: Wrap controllers code into dummy loop (rhbz#870003)
  - qemu: Add controllers in specified order (rhbz#870003)
  - tests: Add test for controller order (rhbz#870003)
  - bandwidth: Attach sfq to leaf node (rhbz#895340)
  - bandwidth: Create hierarchical shaping classes (rhbz#895340)
  - remote: Forbid default "/session" connections when using ssh transport (rhbz#847822)
  - remote: Fix client crash when URI path is empty when using ssh (rhbz#847822)
  - udev: Fix crash in libudev logging (rhbz#971904)
  - iscsi: Don't leak portal string when starting a pool (rhbz#975392)
  - storage: Avoid double virCommandFree in virStorageBackendLogicalDeletePool (rhbz#921387)
  - manual: Fix copy-paste errors (rhbz#923613)
  - esx: Support virtualHW version 9 (rhbz#955575)
  - manual: Add info about migrateuri in virsh manual (rhbz#878765)
  - conf: Fix cpumask leak in virDomainDefFree (rhbz#977430)
  - qemu: Avoid leaking uri in qemuMigrationPrepareDirect (rhbz#977961)
  - Document that runtime changes may be lost after S4 suspend (rhbz#872419)
  - virsh iface-bridge: Ignore delay if stp is turned off (rhbz#892403)
  - virsh: Obey pool-or-uuid spec when creating volumes (rhbz#970495)
  - Add method for checking if a string is (probably) a log message (rhbz#954248)
  - Convert QEMU driver to use virLogProbablyLogMessage (rhbz#954248)
  - util: Escapes special characters in VIR_LOG_REGEX (rhbz#954248)
  - qemu: Move QEMU log reading into a separate function (rhbz#954248)
  - qemu: Ignore libvirt logs when reading QEMU error output (rhbz#954248)
  - logging: Make log regexp more compact (and readable) (rhbz#954248)
  - qemu: Do not report unsafe migration for local files (rhbz#913363)
  - Plug leak in virCgroupMoveTask (rhbz#978352)
  - Fix invalid read in virCgroupGetValueStr (rhbz#978356)
  - pci: Initialize virtual_functions array pointer to avoid segfault (rhbz#980339)
  - Node device driver: update driver name during dumpxml (rhbz#979330)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-20
changelog:
  - qemu: Don't force port=0 for SPICE (rhbz#975751)
  - qemu: Refactor graphics code to not hardcode a single display (rhbz#975751)
  - qemu: Graphics support for simultaneous one of each sdl, vnc, spice (rhbz#975751)
  - qemu: Don't miss errors when changing graphics passwords (rhbz#975751)
  - qemu: Allow seamless migration for domains with multiple graphics (rhbz#975751)
  - qemu_migration: Move waiting for SPICE migration (rhbz#920205)
  - util: Refactor iptables command construction into multiple steps (rhbz#851455)
  - net: Support set public ip range for forward mode nat (rhbz#851455)
  - net: Add support for specifying port range for forward mode nat (rhbz#851455)
  - qemu_migrate: Dispose listen address if set from config (rhbz#971485)
  - qemu: Remove maximum cpu limit when setting processor count using the API (rhbz#855296)
  - qemu_agent: Introduce helpers for agent based CPU hot(un)plug (rhbz#924400)
  - virsh-domain: Refactor cmdVcpucount and fix output on inactive domains (rhbz#924400)
  - API: Introduce VIR_DOMAIN_VCPU_AGENT, for agent based CPU hot(un)plug (rhbz#924400)
  - qemu: Implement request of vCPU state using the guest agent (rhbz#924400)
  - qemu: Implement support for VIR_DOMAIN_VCPU_AGENT in qemuDomainSetVcpusFlags (rhbz#924400)
  - qemuDomainGetVcpusFlags: Initialize ncpuinfo (rhbz#924400)
  - Fix commit 29c1e913e459058c12d02b3f4b767b3dd428a498 (rhbz#924400)
  - qemu: Make qemuMigrationIsAllowed more reusable (rhbz#972675)
  - qemu: Cancel migration if guest encoutners I/O error while migrating (rhbz#972675)
  - qemu: Forbid migration of machines with I/O errors (rhbz#972675)
  - migration: Make erroring out on I/O error controllable by flag (rhbz#972675)
  - migration: Don't propagate VIR_MIGRATE_ABORT_ON_ERROR (rhbz#972675)
  - Paused domain should remain paused after migration (rhbz#972675)
  - qemu: New vnc display sharing policy caps flag (rhbz#803602)
  - conf: Add 'sharePolicy' attribute to graphics element for vnc (rhbz#803602)
  - qemu: Add ', share=<policy>' to qemu commandline (rhbz#803602)
  - virsh: Distinguish errors between missing argument and wrong option (rhbz#924596)
  - virsh: Fix incorrect argument errors for long options (rhbz#924596)
  - virsh: Resolve Coverity 'MISSING_BREAK' (rhbz#924596)
  - virnetdev: Need to initialize 'pciConfigAddr' (rhbz#980339)
  - qemu: Fix double free in qemuMigrationPrepareDirect (rhbz#977961)
  - sec_manager: Refuse to start domain with unsupported seclabel (rhbz#947387)
  - usb: Don't spoil decimal addresses (rhbz#981503)
  - storage: Return -1 when fs pool can't be mounted (rhbz#983539)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-21
changelog:
  - conf: Avoid NULL deref for pmsuspended domain state (rhbz#822306)
  - libvirt: Define domain crash event types (rhbz#822306)
  - qemu: Refactor processWatchdogEvent (rhbz#822306)
  - qemu: Expose qemuProcessShutdownOrReboot() (rhbz#822306)
  - qemu: Implement 'oncrash' events when guest panicked (rhbz#822306)
  - qemu: Implement 'oncrash' coredump events when guest panicked (rhbz#822306)
  - conf: Fix a memory leak when parsing nat port XML nodes (rhbz#851455)
  - security_manager: Fix comparison (rhbz#984793)
  - qemu: Prevent crash of libvirtd without guest agent configuration (rhbz#984821)
  - qemu: Fix double free of returned JSON array in qemuAgentGetVCPUs() (rhbz#984821)
  - qemu_agent: Add support for appending arrays to commands (rhbz#924400)
  - Add support for locking domain's memory pages (rhbz#947118)
  - qemu: Implement support for locking domain's memory pages (rhbz#947118)
  - qemu: Check for -realtime mlock=on|off support (rhbz#947118)
  - qemu: Move memory limit computation to a reusable function (rhbz#947118)
  - util: New virCommandSetMax(MemLock|Processes|Files) (rhbz#947118)
  - qemu: Set RLIMIT_MEMLOCK when memoryBacking/locked is used (rhbz#947118)
  - Add Gluster protocol as supported network disk backend (rhbz#849796)
  - qemu: Add support for gluster protocol based network storage backend. (rhbz#849796)
  - tests: Add tests for gluster protocol based network disks support (rhbz#849796)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-22
changelog:
  - virsh: Fix change-media bug on disk block type (rhbz#923053)
  - Fix patches for multiple graphics and spice migration (rhbz#975751)
  - Revert "qemu: Remove maximum cpu limit when setting processor count using the API" (rhbz#855296)
  - Remove VIR_DOMAIN_SHUTDOWN_CRASHED from public API (rhbz#822306)
  - Rename VIR_DOMAIN_PAUSED_GUEST_PANICKED to VIR_DOMAIN_PAUSED_CRASHED (rhbz#822306)
  - Improve LXC startup error reporting (rhbz#903092)
  - qemu: Take error path if acquiring of job fails in qemuDomainSaveInternal (rhbz#928661)
  - util: Improve user lookup helper (rhbz#964359)
  - util: Add virGetGroupList (rhbz#964359)
  - util: Make virSetUIDGID async-signal-safe (rhbz#964359)
  - Fix potential deadlock across fork() in QEMU driver (rhbz#964359)
  - security: Framework for driver PreFork handler (rhbz#964359)
  - security_dac: Compute supplemental groups before fork (rhbz#964359)
  - security: Fix deadlock with prefork (rhbz#964359)
  - Split TLS test into two separate tests (rhbz#975201)
  - Avoid re-generating certs every time (rhbz#975201)
  - Change data passed into TLS test cases (rhbz#975201)
  - Fix validation of CA certificate chains (rhbz#975201)
  - Fix parallel runs of TLS test suites (rhbz#975201)
  - tests: Fix parallel runs of TLS test suites (rhbz#975201)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-23
changelog:
  - virnettlscontext: Resolve Coverity warnings (UNINIT) (rhbz#975201)
  - Fix qemuProcessReadLog with non-zero offset (rhbz#991334)
  - virSecurityManagerGenLabel: Skip seclabels without model (rhbz#997818)
  - bitmap: Add virBitmapCountBits (rhbz#997367)
  - virbitmap: Refactor virBitmapParse to avoid access beyond bounds of array (rhbz#997367)
  - virbitmaptest: Add test for out of bounds condition (rhbz#997367)
  - network: Allow <vlan> in type='hostdev' networks (rhbz#999107)
  - python: Fix bindings that don't raise an exception (rhbz#912170)
  - storage: Update pool metadata after adding/removing/resizing volume (rhbz#965442)
  - storage: Fix coverity warning (rhbz#965442)
  - storage: Fix the use-after-free memory bug (rhbz#965442)
  - network: Permit upstream forwarding of unqualified DNS names (rhbz#928638)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-24
changelog:
  - security: Provide supplemental groups even when parsing label (rhbz#964359)
  - qemu: Remove hostdev entry when freeing the depending network entry (rhbz#1000973)
  - virsh: Correct DESCRIPTION for virsh help blockcopy (rhbz#1002790)
  - Add '<nat>' element to '<forward>' network schemas (rhbz#1004365)
  - build: More workarounds for if_bridge.h (rhbz#1002735)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-25
changelog:
  - migration: Do not restore labels on failed migration (rhbz#895826)
  - qemu: Use default machine type if missing it in qemu command line (rhbz#995312)
  - qemu: Don't leak vm on failure (rhbz#995312)
  - virDomainDefParseXML: Set the argument of virBitmapFree to NULL after calling virBitmapFree (rhbz#1006710)
  - tests: Files named '.*-invalid.xml' should fail validation (rhbz#1006710)
  - tests: Use portable shell code (rhbz#1006710)
  - Add test for the nodemask double free crash (rhbz#1006710)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-26
changelog:
  - Fix crash in remoteDispatchDomainMemoryStats (CVE-2013-4296)
  - Introduce APIs for splitting/joining strings (rhbz#1006266)
  - Rename virKillProcess to virProcessKill (rhbz#1006266)
  - Rename virPid{Abort, Wait} to virProcess{Abort, Wait} (rhbz#1006266)
  - Rename virCommandTranslateStatus to virProcessTranslateStatus (rhbz#1006266)
  - Move virProcessKill into virprocess.{h, c} (rhbz#1006266)
  - Move virProcess{Kill, Abort, TranslateStatus} into virprocess.{c, h} (rhbz#1006266)
  - Include process start time when doing polkit checks (rhbz#1006266)
  - Add support for using 3-arg pkcheck syntax for process (CVE-2013-4311)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-28
changelog:
  - libvirt-guests: status: Return non-zero when stopped (rhbz#1011981)
  - qemu: Drop qemuDomainMemoryLimit (rhbz#1013758)
  - docs: Discourage users to set hard_limit (rhbz#1013758)
  - docs: Clean 09adfdc62de2b up (rhbz#1013758)
  - qemuSetupMemoryCgroup: Handle hard_limit properly (rhbz#1013758)
  - qemuBuildCommandLine: Fall back to mem balloon if there's no hard_limit (rhbz#1013758)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-29
changelog:
  - virNetDevBandwidthEqual: Make it more robust (rhbz#1014198)
  - qemu_hotplug: Allow QoS update in qemuDomainChangeNet (rhbz#1014198)
  - qemu: Generate correct name for hostdev network devices (rhbz#1001881)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-30
changelog:
  - Fix race in starting transient VMs (rhbz#1022924)
  - qemuDomainDestroyFlags: Don't allow @vm to disappear while executing API (rhbz#1030736)
  - python: return dictionary without value in case of no blockjob (rhbz#999454)
  - remote: fix regression in event deregistration (rhbz#1020372)
  - Add virtio-scsi to fallback models of scsi controller (rhbz#1014943)
  - qemu: Avoid operations on NULL monitor if VM fails early (rhbz#1047659)
  - qemu: Do not access stale data in virDomainBlockStats (CVE-2013-6458)
  - qemu: Avoid using stale data in virDomainGetBlockInfo (CVE-2013-6458)
  - qemu: Fix job usage in qemuDomainBlockJobImpl (CVE-2013-6458)
  - qemu: Fix job usage in qemuDomainBlockCopy (rhbz#1043069)
  - qemu: Fix job usage in virDomainGetBlockIoTune (CVE-2013-6458)
  - Don't crash if a connection closes early (CVE-2014-1447)
  - Really don't crash if a connection closes early (CVE-2014-1447)
  - Block info query: Add check for transient domain (rhbz#1040507)
  - network: only prevent forwarding of DNS requests for unqualified names (rhbz#1037741)
  - network: change default of forwardPlainNames to 'yes' (rhbz#1037741)
  - sanlock: Truncate domain names longer than SANLK_NAME_LEN (rhbz#1060557)
  - Remove contiguous CPU indexes assumption (rhbz#1066473)
  - qemu: monitor: Fix error message and comment when getting cpu info (rhbz#1066473)
  - qemu: monitor: Filter out thread ids of CPUS that were unplugged (rhbz#1066473)
  - qemu: monitor: Fix invalid parentheses (rhbz#1076719)
  - virNetClientSetTLSSession: Restore original signal mask (rhbz#1078589)
  - spec: Switch to "git am" for applying patches (rhbz#1076719)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-31
changelog:
  - doc: schema: Add basic documentation for the virtual RNG device support (rhbz#786408)
  - conf: Add support for RNG device configuration in XML (rhbz#786408)
  - conf: Add RNG device ABI compatibility check (rhbz#786408)
  - qemu: Implement support for default 'random' backend for virtio-rng (rhbz#786408)
  - qemu: Implement support for EGD backend for virtio-rng (rhbz#786408)
  - docs: domain: /dev/urandom isn't a valid rng patch (rhbz#786408)
  - tests: Add tests for virtio-rng device handling (rhbz#786408)
  - docs: Fix attribute name for virtio-rng backend (rhbz#786408)
  - rng: restrict passthrough names to known-good files (rhbz#786408)
  - Resolve valgrind error (rhbz#786408)
  - Fix crash parsing RNG device specification (rhbz#786408)
  - rng: allow default device in RNG grammar (rhbz#786408)
  - virtio-rng: Add rate limiting options for virtio-RNG (rhbz#786408)
  - qemu_caps: Enable virtio-rng for RHEL-6.6 qemu-kvm downstream (rhbz#786408)
  - audit: Audit resources used by VirtIO RNG (rhbz#786408)
  - virtio-rng: Remove double space in error message (rhbz#786408)
  - doc: fix XML for the RNG device example (rhbz#786408)
  - conf: Don't crash on invalid chardev source definition of RNGs and other (rhbz#786408)
  - conf: Fix XML formatting of RNG device info (rhbz#786408)
  - libvirt: fix error message when connection can't be opened (rhbz#851413)
  - conf: fix error for parallel port mismatch (rhbz#950830)
  - virsh: clarify vol-{down, up}load description (rhbz#955539)
  - virsh: fix doc typos (rhbz#1022872)
  - util: use string libvirt to prefix error message instead of libvir (rhbz#911996)
  - docs: use MiB/s instead of Mbps for migration speed (rhbz#948821)
  - schema: require target path in storage pool xml (rhbz#893273)
  - schema: make source optional in volume XML (rhbz#893273)
  - Add qxl ram size to ABI stability check (rhbz#1035134)
  - qemu: fix default spice password setting (rhbz#953721)
  - Expose ownership ID parsing (rhbz#963881)
  - Make qemuOpenFile aware of per-VM DAC seclabel. (rhbz#869053)
  - Use qemuOpenFile in qemu_driver.c (rhbz#963881)
  - virsh: Fix heading in manpage (rhbz#996840)
  - qemu: Change the default unix monitor timeout (rhbz#1051364)
  - qemu: fix live pinning to memory node on NUMA system (rhbz#857312)
  - qemu: Clean up qemuDomainSetNumaParameters (rhbz#857312)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-32
changelog:
  - virsh-snapshot: Reject --no-metadata together with --print-xml (rhbz#892508)
  - snapshot: Mention disk-only snapshots in error message (rhbz#880521)
  - qemu: snapshot: Report better error message if migration isn't allowed (rhbz#884926)
  - qemu: snapshot: Remove memory image if external checkpoint fails (rhbz#885963)
  - virsh-snapshot: Fix XPath query to determine snapshot state (rhbz#890457)
  - conf: Check if number of vCPUs fits in the storage variable (rhbz#902652)
  - conf: Improve error messages if parsing of vCPU count fails (rhbz#902652)
  - qemu: snapshot: Don't kill access to disk if snapshot creation fails (rhbz#906639)
  - qemu: Un-mark volume as mirrored/copied if blockjob copy fails (rhbz#923125)
  - qemu-blockjob: Fix limit of bandwidth for block jobs to supported value (rhbz#927160)
  - virsh: Fix typo in docs (rhbz#949776)
  - virsh-domain: Report errors on invalid --holdtime value for cmdSendKey (rhbz#952938)
  - qemu: Don't update count of vCPUs if hot-plug fails silently (rhbz#1000357)
  - virsh: man: Mention that volumes need to be in storage pool for undefine (rhbz#1044790)
  - Disable nwfilter driver when running unprivileged (rhbz#1029299)
  - storage: reduce number of stat calls (rhbz#977706)
  - Ignore missing files on pool refresh (rhbz#977706)
  - sanlock: add missing test command in virt-sanlock-cleanup.in (rhbz#1000890)
  - virt-sanlock-cleanup; Fix augtool usage (rhbz#1000890)
  - conf: Fix typo in error message in ABI stability check (rhbz#961655)
  - qemu: Improve error when setting invalid count of vcpus via agent (rhbz#1035109)
  - doc: Clarify usage of SELinux baselabel (rhbz#954245)
  - selinux: Don't mask errors of virSecuritySELinuxGenNewContext (rhbz#954245)
  - qemu: Return meaningful error when qemu dies early (rhbz#844378)
  - sanlock: Forbid VIR_DOMAIN_LOCK_FAILURE_IGNORE (rhbz#905280)
  - Remove the redundant parentheses in migrate help (rhbz#927497)
  - virt-xml-validate: add missing schemas (rhbz#1006699)
  - tools: add missing 'interface' type and update man page (rhbz#1006699)
  - qemu: Don't require a block or file when looking for an alias (rhbz#1078328)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-33
changelog:
  - conf: fix error for parallel port mismatch (rhbz#950830)
  - virDomainReboot: Document that migration might be unsafe (rhbz#744967)
  - interface: list all interfaces with flags == 0 (rhbz#884382)
  - Fix the syntax-check failure (rhbz#884382)
  - Crash of libvirtd by unprivileged user in virConnectListAllInterfaces (rhbz#884382)
  - qemuDomainObjStart: Warn on corrupted image (rhbz#1022008)
  - QoS: make tc filters match all traffic (rhbz#1084477)
  - conf: add support for booting from redirected USB devices (rhbz#1035190)
  - Add redirdevs to ABI stability check (rhbz#1035529)
  - Fix incorrect values in redirdev ABI check error (rhbz#1035529)
  - virSecurityLabelDefParseXML: Don't parse label on model='none' (rhbz#1027096)
  - storage: Skip inactive lv volumes (rhbz#748282)
  - Check for existence of interface prior to setting terminate flag (rhbz#903480)
  - storage: Avoid forward declaration of virStorageVolDelete (rhbz#1024159)
  - storage: Don't update pool available/allocation if buildVol fails (rhbz#1024159)
  - conf: Report errors on cputune parameter parsing (rhbz#1040784)
  - Treat zero cpu shares as a valid value (rhbz#1040784)
  - Show the real cpu shares value in live XML (rhbz#1040784)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-34
changelog:
  - nwfilter: Remove error report in virNWFilterDHCPSnoopEnd (rhbz#903480)
  - conf: introduce generic ISA address (rhbz#1033984)
  - conf: add support for panic device (rhbz#1033984)
  - qemu: add support for -device pvpanic (rhbz#1033984)
  - PanicCheckABIStability: Need to check for existence (rhbz#1033984)
  - use virBitmapFree instead of VIR_FREE for cpumask (rhbz#1088165)
  - Properly free vcpupin info for unplugged CPUs (rhbz#1088165)
  - Save domain status after cpu hotplug (rhbz#1088703)
  - Document behavior of setvcpus during guest boot (rhbz#1088748)
  - qemu: Use maximum guest memory size when getting NUMA placement advice (rhbz#1011906)
  - qemu: Properly format the uuid string in error messages (rhbz#947974)
  - qemu: Split out code to generate SPICE command line (rhbz#953126)
  - qemu: Improve handling of channels when generating SPICE command line (rhbz#953126)
  - qemu: Split out SPICE port allocation into a separate function (rhbz#953126)
  - qemu: Do sensible auto allocation of SPICE port numbers (rhbz#953126)
  - qemu: fix failure to start with spice graphics and no tls (rhbz#953126)
  - qemu: Do not ignore address for USB disks (rhbz#985166)
  - qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly (rhbz#985166)
  - qemu: refactor qemuDomainCheckDiskPresence for only disk presence check (rhbz#1014730)
  - qemu: add helper functions for diskchain checking (rhbz#1014730)
  - qemu: check presence of each disk and its backing file as well (rhbz#1014730)
  - conf: add startupPolicy attribute for harddisk (rhbz#1014730)
  - qemu: support to drop disk with 'optional' startupPolicy (rhbz#1014730)
  - qemu: Avoid overflow when setting migration speed (rhbz#1083483)
  - qemu: Avoid overflow when setting migration speed on inactive domains (rhbz#1083483)
  - caps: Add helpers to convert NUMA nodes to corresponding CPUs (rhbz#1012846)
  - qemu: Set cpuset.cpus for domain process (rhbz#1012846)
  - qemu: Unbreak p2p migration with complete migration URI (rhbz#1073227)
  - maint: don't lose error on canceled migration (rhbz#1073227)
  - virsh: suppress aliases in group help (rhbz#956968)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-35
changelog:
  - qemu: export disk snapshot support in capabilities (rhbz#1081032)
  - qemu: extract guest capabilities initialization (rhbz#1081032)
  - qemu: add unit tests for the capabilities xml (rhbz#1081032)
  - qemu: properly quit migration with abort_on_error (rhbz#1045833)
  - conf: restrict external snapshots to backing store formats (rhbz#1019926)
  - qemu: don't check for backing chains for formats w/o snapshot support (rhbz#1019926)
  - qemu: don't call virFileExists() for network type disks (rhbz#1019926)
  - net: Change argument type of virNetworkObjIsDuplicate() (rhbz#1057321)
  - net: Move creation of dnsmasq hosts file to function starting dnsmasq (rhbz#1057321)
  - net: Re-use checks when creating transient networks (rhbz#1057321)
  - network: prevent a few invalid configuration combinations (rhbz#1057321)
  - network: disallow <bandwidth>/<mac> for bridged/macvtap/hostdev networks (rhbz#1057321)
  - virsh-domain: Fix cmdSetvcpus error message (rhbz#1092412)
  - spice: detect if qemu can disable file transfer (rhbz#983018)
  - spice: expose the QEMU disable file transfer option (rhbz#983018)
  - qemu_caps: detect if qemu can disable file transfer for spice (rhbz#983018)
  - Device{Attach, Detach}: Document S4 limitations (rhbz#808463)
  - storageVolCreateXMLFrom: Allow multiple accesses to origvol (rhbz#1058700)
  - LSN-2014-0003: Don't expand entities when parsing XML (CVE-2014-0179)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-36
changelog:
  - virSecuritySELinuxSetFileconHelper: Don't fail on read-only NFS (rhbz#1095135)
  - storage: Resolve issues in failure path (rhbz#1092882)
  - interface: Introduce netcfInterfaceObjIsActive (rhbz#1095774)
  - interface: dump inactive xml when interface isn't active (rhbz#1095774)
  - qemu: add host-pci-multidomain capability (rhbz#1092390)
  - qemu: specify domain in host-side PCI addresses when needed/supported (rhbz#1092390)
  - util: fix virFileOpenAs return value and resulting error logs (rhbz#851411)
  - qemu: check actual netdev type rather than config netdev type during init (rhbz#1012834)
  - Fix parsing of bond interface XML (rhbz#1067062)
  - qemuSetupCgroup: Fix reference to cgroup (rhbz#1012846)
  - apibuild: Disallow 'returns' return decription (rhbz#808463)
  - ESX: Add support for virtualHW version 10 (rhbz#1089389)
  - storage: Ensure 'qemu-img resize' size arg is a 512 multiple (rhbz#1002813)
  - qemu: Adjust size for qcow2/qed if not on sector boundary (rhbz#1002813)
  - sanlock: code movement in virLockManagerSanlockAcquire (rhbz#1088034)
  - sanlock: don't fail with unregistered domains (rhbz#1088034)
  - sanlock: avoid leak in acquire() (rhbz#1088034)
  - networkStartNetwork: Be more verbose (rhbz#1064831)
  - network_conf: Expose virNetworkDefFormatInternal (rhbz#1064831)
  - Avoid crash when LXC start fails with no interface target (rhbz#1064831)
  - lxc_process: Avoid passing NULL iface->iname (rhbz#1064831)
  - network: Introduce network hooks (rhbz#1064831)
  - bridge_driver.h: Fix build --without-network (rhbz#1064831)
  - networkRunHook: Run hook only if possible (rhbz#1064831)
  - conf: clarify what is returned for actual bandwidth and vlan (rhbz#1064831)
  - conf: handle null pointer in virNetDevVlanFormat (rhbz#1064831)
  - conf: make virDomainNetDefFormat a public function (rhbz#1064831)
  - conf: re-situate <bandwidth> element in <interface> (rhbz#1064831)
  - conf: new function virDomainActualNetDefContentsFormat (rhbz#1064831)
  - Slightly refactor hostdev parsing / formating (rhbz#1064831)
  - conf: output actual netdev status in <interface> XML (rhbz#1064831)
  - network: include plugged interface XML in "plugged" network hook (rhbz#1064831)
  - network: don't even call networkRunHook if there is no network (rhbz#1064831)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-37
changelog:
  - udev: consider the device a CDROM when ID_CDROM=1 (rhbz#1016878)
  - Add support for timestamping QEMU logs (rhbz#997010)
  - Detect -msg-timestamp capability from QEMU help output (rhbz#997010)
  - qemu: Avoid leak in qemuDomainCheckRemoveOptionalDisk (rhbz#1014730)
  - Return right error code for baselineCPU (rhbz#1097969)
  - Add a port allocator class (rhbz#1018695)
  - Avoid integer wrap on remotePortMax in QEMU driver (rhbz#1018695)
  - Followup fix for integer wraparound in port allocator (rhbz#1018695)
  - Don't spam logs with "port 0 must be in range" errors (rhbz#1018695)
  - qemu: Avoid assigning unavailable migration ports (rhbz#1018695)
  - qemu: Make migration port range configurable (rhbz#1018695)
  - qemu: Fix augeas support for migration ports (rhbz#1018695)
  - qemu: clean up migration ports when migration cancelled (rhbz#1018695)
  - qemuDomainObjBeginJobInternal: Return -2 for temporary failures (rhbz#1083238)
  - qemu: Make qemuProcess{Start, Stop}CPUs easier to follow (rhbz#1083238)
  - qemu: Ignore temporary job errors when checking migration status (rhbz#1083238)
  - qemu: Send migrate_cancel when aborting migration (rhbz#1098833)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-38
changelog:
  - remote: Don't leak priv->tls object on connection failure (rhbz#1099075)
  - Fix invalid read in virNetSASLSessionClientStep debug log (rhbz#1100173)
  - Tie SASL callbacks lifecycle to virNetSessionSASLContext (rhbz#1100173)
  - fix leak in memoryStats with older python (rhbz#1099860)
  - hooks: let virCommand do the error reporting (rhbz#1105397)
  - SELinux: don't fail silently when no label is present (rhbz#1105954)
  - qemu: Add qemuDomainReleaseDeviceAddress to remove any address (rhbz#807023)
  - qemu: Separate disk device removal into a standalone function (rhbz#807023)
  - qemu: Separate controller removal into a standalone function (rhbz#807023)
  - qemu: Separate net device removal into a standalone function (rhbz#807023)
  - qemu: Separate host device removal into a standalone function (rhbz#807023)
  - Add VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED event (rhbz#807023)
  - examples: Handle VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED event (rhbz#807023)
  - Clarify virDomainDetachDeviceFlags documentation (rhbz#807023)
  - Add virDomainDefFindDevice for looking up a device by its alias (rhbz#807023)
  - qemu: Add support for DEVICE_DELETED event (rhbz#807023)
  - qemu: Remove devices only after DEVICE_DELETED event (rhbz#807023)
  - qemu: Emit VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED events (rhbz#807023)
  - Add function to find a needle in a string array (rhbz#807023)
  - util: Non-existent string array does not contain any string (rhbz#807023)
  - conf: Make error reporting in virDomainDefFindDevice optional (rhbz#807023)
  - qemu: Introduce qemuMonitorGetDeviceAliases (rhbz#807023)
  - qemu: Unplug devices that disappeared when libvirtd was down (rhbz#807023)
  - qemu: Finish device removal in the original thread (rhbz#807023)
  - qemu: Process DEVICE_DELETED event in a separate thread (rhbz#807023)
  - qemu: Remove interface backend only after frontend is gone (rhbz#807023)
  - qemu: Remove disk backend only after frontend is gone (rhbz#807023)
  - qemu: Return in from qemuDomainRemove*Device (rhbz#807023)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-39
changelog:
  - Fix crash when saving a domain with type none dac label (rhbz#1108590)
  - Initialize threading & error layer in LXC controller (rhbz#1109120)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-40
changelog:
  - formatdomain.html.in: Document implementation limitation of QoS (rhbz#980350)
  - Fix error in qemuDomainSetNumaParamsLive (rhbz#857312)
  - cpu: Add new Broadwell CPU model (rhbz#1100381)
  - docs: publish correct enum values (rhbz#1113316)
  - qemu: blockcopy: Don't remove existing disk mirror info (rhbz#1113828)
  - qemu: fix guestfwd chardev option back how it was (rhbz#1112066)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-41
changelog:
  - Add invariant TSC cpu flag (rhbz#996772)
  - Fix segfault when starting a domain with no cpu definition (rhbz#996772)
  - qemu: copy: Accept 'format' parameter when copying to a non-existing img (rhbz#1113828)
  - Bind connection close callback APIs to python binding (rhbz#1114619)
  - qemu: Factor out body of qemuDomainGetMetadata for universal use (rhbz#1115039)
  - qemu: Factor out body of qemuDomainSetMetadata for universal use (rhbz#1115039)
  - conf: Factor out setting of metadata to simplify code (rhbz#1115039)
  - util: Add helper to convert libxml2 nodes to a string (rhbz#1115039)
  - conf: Add support for requesting of XML metadata via the API (rhbz#1115039)
  - conf: allow to add XML metadata using the virDomainSetMetadata api (rhbz#1115039)
  - conf: Avoid false positive of uninitialized variable use (rhbz#1115039)
  - lib: Don't force the key argument when deleting metadata (rhbz#1115039)
  - test: Add <metadata> support into the test drivera (rhbz#1115039)
  - tests: Add metadata tests (rhbz#1115039)
  - conf: Don't corrupt metadata on OOM (rhbz#1115039)
  - Ignore additional fields in iscsiadm output (rhbz#1116741)
  - conf: net: Fix helper for applying new network definition (rhbz#1116754)
  - blockjob: wait for pivot to complete (rhbz#1119385)
  - virsh: Introduce macros to reject mutually exclusive arguments (rhbz#1117177)
  - virsh-domain: Add --live, --config, --current logic to cmdAttachDisk (rhbz#1117177)
  - virsh-domain: Add --live, --config, --current logic to cmdDetachDevice (rhbz#1117177)
  - virsh-domain: Add --live, --config, --current logic to cmdDetachDisk (rhbz#1117177)
  - virsh: Use inactive definition when removing disk from config (rhbz#1117177)
  - virsh-domain: Add --live, --config, --current logic to cmdAttachDevice (rhbz#1117177)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-42
changelog:
  - conf: Fix backport of metadata API code (rhbz#1115039)
  - conf: Always format seclabel's model (rhbz#1113860)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-43
changelog:
  - Fix blkdeviotune for shutoff domain (rhbz#1122819)
  - rpc: message related sizes enlarged (rhbz#1126393)
  - Increase the size of REMOTE_MIGRATE_COOKIE_MAX to REMOTE_STRING_MAX (rhbz#1126393)
  - Fix max stream packet size for old clients (rhbz#1126393)
  - Adjust legacy max payload size to account for header information (rhbz#1126393)
  - rpc: Correct the wrong payload size checking (rhbz#1126393)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-46
changelog:
  - cpu: separate host-model and host-passthrough (rhbz#1138222)
  - Don't include non-migratable features in host-model (rhbz#1138222)
  - Don't add dhcp hosts to hostsfile twice (rhbz#1137011)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-47
changelog:
  - Revert "qemu: export disk snapshot support in capabilities" (rhbz#1149667)
  - qemu: allow restore with non-migratable XML input (rhbz#1141838)
  - qemu: Introduce qemuDomainDefCheckABIStability (rhbz#1141838)
  - Make ABI stability issue easier to debug (rhbz#1141838)
  - domain_conf: fix domain deadlock (CVE-2014-3657)
  - CVE-2014-3633: qemu: blkiotune: Use correct definition when looking up disk (CVE-2014-3633)
  - CVE-2014-7823: dumpxml: security hole with migratable flag (CVE-2014-7823)
  - sanlock: Avoid freeing uninitialized value (rhbz#1136788)
  - virsh: Print cephx and iscsi usage (rhbz#1156327)
  - Fix bug with loading bridge name for active domain during libvirtd start (rhbz#1146310)
  - conf: Fix even implicit labels (rhbz#1138500)
  - tests: Add test cases for previous commit (rhbz#1138500)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-48
changelog:
  - networkValidate: Disallow bandwidth in portgroups too (rhbz#1115292)
  - qemu: Fix checking of ABI stability when restoring external checkpoints (rhbz#834196)
  - qemu: Use "migratable" XML definition when doing external checkpoints (rhbz#834196)
  - qemu: Fix memleak after commit 59898a88ce8431bd3ea249b8789edc2ef9985827 (rhbz#834196)
  - qemu: blkiotune: Avoid accessing non-existing disk configuration (rhbz#1131821)
  - qemu: Fix build error introduced in 653137eb957a278b556c6226424aad5395a (rhbz#1131821)
  - qemu: snapshot: Use better check when reverting external snapshots (rhbz#1124854)
  - virsh: domain: Use global constant for XML file size limit (rhbz#1134671)
  - selinux: Avoid label reservations for type = none (rhbz#1138488)
  - Clean up chardev sockets on QEMU shutdown (rhbz#1122367)
  - Don't include @LIBS@ in libvirt.pc.in file (rhbz#1134455)
  - qemu: save domain state to XML after reboot (rhbz#1169405)
  - virsh: Honour -q in domblklist, vcpupin and emulatorpin (rhbz#1135171)
  - virsh-domain: Flip logic in cmdSetvcpus (rhbz#1139114)
  - Fix possible memory leak in util/virxml.c (rhbz#1136729)
  - esx_vi: fix possible segfault (rhbz#1136729)
  - sasl: Fix authentication when using PLAIN mechanism (rhbz#1171521)
  - Fix leak in x86UpdateHostModel (rhbz#1144304)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-49
changelog:
  - nwfilter: utility function virNWFilterVarValueEqual (rhbz#1126487)
  - qemu: support live update of an interface's filter (rhbz#1126487)
  - qemu: Update fsfreeze status on domain state transitions (rhbz#1136251)
  - virsh: Fix semantics of --config for "update-device" command (rhbz#1129112)
  - virsh: Don't use legacy API if --current is used on device hot(un)plug (rhbz#1125194)
  - qemu: Avoid double serial output with RHEL 6 qemu (rhbz#1162759)
  - storage: Check the partition name against provided name (rhbz#1138523)
  - qemu: Don't unconditionally delete file in qemuOpenFileAs (rhbz#1158036)
  - conf: Don't mangle vcpu placement randomly (rhbz#1170495)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-50
changelog:
  - conf: Don't format actual network definition in migratable XML (rhbz#1186142)
  - network: don't allow multiple portgroups with the same name in a network (rhbz#1115858)
  - build: fix build with latest rawhide kernel headers (rhbz#1198698)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-51
changelog:
  - sanlock: Don't spam logs with "target pid not found" (rhbz#1189414)
  - nwfilter: fix crash when adding non-existing nwfilter (rhbz#1202703)
  - util: more verbose error when failing to create macvtap device (rhbz#1186142)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-52
changelog:
  - qemu: Keep QEMU host drive prefix in BlkIoTune (rhbz#1203633)
  - qemu: Fix name comparison in qemuMonitorJSONBlockIoThrottleInfo() (rhbz#1203633)
  - virsh: fix typos in virsh man page (rhbz#1130835)
  - schemas: Allow all generic elements and attributes for all interfaces (rhbz#1206066)
  - RNG: Allow multiple parameters to be passed to an interface filter (rhbz#1206066)
  - qemu_domain: fix startup policy for disks (rhbz#1203542)
  - Create directory for lease files if it's missing (rhbz#1200991)
  - qemu: cgroup: Properly set up vcpu pinning (rhbz#1198096)
  - cgroup: Add accessors for cpuset.memory_migrate (rhbz#1198497)
  - qemu: Fix possible crash (rhbz#1198497)
  - qemu: Migrate memory on numatune change (rhbz#1198497)
  - qemu: fix crash when removing <filterref> from interface with update-device (rhbz#1205042)
  - nwfilter: Fix rule priority problem (rhbz#1210183)
  - qemuProcessHook: Call qemuProcessInitNumaMemoryPolicy only when needed (rhbz#1198645)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-53
changelog:
  - RHEL: Avoid memory leak when virCgroupSetCpusetMemoryMigrate fails (rhbz#1198497)
  - qemu: cgroup: Fix memory leak when there's no vCPU pinning (rhbz#1198096)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-54
changelog:
  - util: set MAC address for VF via netlink message to PF+VF# when possible (rhbz#1113474)
  - util: set macvtap physdev online when macvtap is set online (rhbz#1113474)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-54.el6_7.1
changelog:
  - qemu: split out cpuset.mems setting (rhbz#1265970)
  - qemu: leave restricting cpuset.mems after initialization (rhbz#1265970)
  - virNetDev{Replace, Restore}MacAddress: Fix memory leak (rhbz#1266039)
  - util: make virNetDev(Replace|Restore)MacAddress public functions (rhbz#1266039)
  - util: don't use netlink to save/set mac for macvtap+passthrough+802.1Qbh (rhbz#1266039)


author: Caolan McNamara <caolanm@redhat.com> 0.2.8.4-1
changelog:
  - get patches merged upstream
  - drop integrated libwmf-0.2.8.3-warnings.patch
  - drop integrated libwmf-0.2.8.3-noextras.patch
  - drop integrated libwmf-0.2.8.3-rh154813.patch


author: Caolan McNamara <caolanm@redhat.com> 0.2.8.4-16
changelog:
  - I wrote it and still had to check the headers to see if I had
    cut and pasted "and later" into then


author: Ville Skyttä <ville.skytta at iki.fi> - 0.2.8.4-18
changelog:
  - Split libwmflite (WMF parser) into -lite subpackage (#432651).
  - Build with dependency tracking disabled.
  - Convert docs to UTF-8.


author: Daniel Veillard <veillard@redhat.com> 2.6.27-1
changelog:
  - upstream release 2.6.27 see http://xmlsoft.org/news.html
  - very large amount of bug fixes reported upstream


author: Daniel Veillard <veillard@redhat.com> 2.7.0-1.fc10
changelog:
  - upstream release of 2.7.0
  - switch to XML 1.0 5th edition
  - switch to RFC 3986 for URI parsing
  - better entity handling
  - option to remove hardcoded limitations in the parser
  - more testing
  - a new API to allocate entity nodes
  - and lot of fixes and clanups


author: Daniel Veillard <veillard@redhat.com> 2.7.2-1.fc10
changelog:
  - new release 2.7.2
  - Fixes the known problems in 2.7.1
  - increase the set of options when saving documents


author: Daniel Veillard <veillard@redhat.com> - 2.7.3-1
changelog:
  - new release 2.7.3
  - limit default max size of text nodes
  - special parser mode for PHP
  - bug fixes and more compiler checks


author: Daniel Veillard <veillard@redhat.com> - 2.7.4-1
changelog:
  - upstream release 2.7.4
  - symbol versioning of libxml2 shared libs
  - very large number of bug fixes


author: Daniel Veillard <veillard@redhat.com> - 2.7.6-5.el6
changelog:
  - Make sure the parser returns when getting a Stop order CVE-2011-3905
  - Fix an allocation error when copying entities CVE-2011-3919
  - Resolves: rhbz#771910


author: Daniel Veillard <veillard@redhat.com> - 2.7.6-9.el6
changelog:
  - Fix a failure to report xmlreader parsing failures
  - Fix parser local buffers size problems (rhbz#843742)
  - Fix entities local buffers size problems (rhbz#843742)
  - Fix an error in previous commit (rhbz#843742)
  - Do not fetch external parsed entities
  - Impose a reasonable limit on attribute size (rhbz#843742)
  - Impose a reasonable limit on comment size (rhbz#843742)
  - Impose a reasonable limit on PI size (rhbz#843742)
  - Cleanups and new limit APIs for dictionaries (rhbz#843742)
  - Introduce some default parser limits (rhbz#843742)
  - Implement some default limits in the XPath module
  - Fixup limits parser (rhbz#843742)
  - Enforce XML_PARSER_EOF state handling through the parser
  - Avoid quadratic behaviour in some push parsing cases (rhbz#843742)
  - More avoid quadratic behaviour (rhbz#843742)
  - Strengthen behaviour of the push parser in problematic situations (rhbz#843742)
  - More fixups on the push parser behaviour (rhbz#843742)
  - Fix a segfault on XSD validation on pattern error
  - Fix an unimplemented part in RNG value validation


author: Daniel Veillard <veillard@redhat.com> - libxml2-2.7.6-18.el6
changelog:
  - CVE-2014-3660 denial of service via recursive entity expansion (rhbz#1149086)
  - Fix html serialization error and htmlSetMetaEncoding (rhbz#1004513)


author: Daniel Veillard <veillard@redhat.com> - libxml2-2.7.6-19.el6
changelog:
  - Stop parsing on entities boundaries errors
  - Fix missing entities after CVE-2014-3660 fix (rhbz#1149086)


author: Daniel Veillard <veillard@redhat.com> - 2.7.6-20.1
changelog:
  - Fix a series of CVEs (rhbz#1286495)
  - CVE-2015-7941 Cleanup conditional section error handling
  - CVE-2015-8317 Fail parsing early on if encoding conversion failed
  - CVE-2015-7942 Another variation of overflow in Conditional sections
  - CVE-2015-7942 Fix an error in previous Conditional section patch
  - Fix parsing short unclosed comment uninitialized access
  - CVE-2015-7498 Avoid processing entities after encoding conversion failures
  - CVE-2015-7497 Avoid an heap buffer overflow in xmlDictComputeFastQKey
  - CVE-2015-5312 Another entity expansion issue
  - CVE-2015-7499 Add xmlHaltParser() to stop the parser
  - CVE-2015-7499 Detect incoherency on GROW
  - CVE-2015-7500 Fix memory access error due to incorrect entities boundaries
  - CVE-2015-8242 Buffer overead with HTML parser in push mode
  - Libxml violates the zlib interface and crashes


author: Preston Brown <pbrown@redhat.com> 3.5.6-1
changelog:
  - enable LFS support (debian bug #100810)
  - quote filenames for running compress commands or pre/postrotate cmds (#21348)
  - deprecate "errors" directive (see bug #16544 for explanation)
  - update man page
  - configurable compression command by Colm Buckley <colm@tuatha.org>


author: Preston Brown <pbrown@redhat.com> 3.6-1
changelog:
  - patch from Alexander Kourakos <awk@awks.org> to stop the shared
    postrotate/prerotate scripts from running if none of the log(s) need
    rotating.  All log files are now checked for rotation in one batch,
    rather than sequentially.
  - more fixes from Paul Martin <pm@debian.org>


author: Elliot Lee <sopwith@redhat.com> 3.6.2-1
changelog:
  - Fix bug #55809 (include logrotate.status in "files")
  - Fix bug #58328 (incorrect error detection when reading state file)
  - Allow 'G' size specifier from bug #57242


author: Erik Troan <ewt@redhat.com>
changelog:
  - always use compressext for the extension for compressed
    files; before compresscmd and compressext had to agree
  - moved all compression to one code block
  - compression, scripts don't use system() anymore
  - compress and maillast didn't work together properly
  - delaycompress and mailfirst didn't work properly
  - don't use system() for mailing (or uncompressing) logs anymore
  - use "-s" for speciying the subjected of mailed logs


author: Miloslav Trmac <mitr@redhat.com> - 3.7.1-2
changelog:
  - Fix sending mails (#131583)
  - Preserve file attributes when compressing files (#121523, original patch by
    Daniel Himler)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.4-11
changelog:
  - logrotate won't stop if there are some errors in configuration
    or glob failures (#166510, #182062)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.4-12
changelog:
  - fix problem with compress_options_list (#227706)
  - fix spec file to meet Fedora standards (#226104)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.5-2
changelog:
  - fix error hadnling after prerotate, postrotate, firstaction 
    script failure. (http://qa.mandriva.com/show_bug.cgi?id=29979)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.5-4
changelog:
  - use dateext in the default config file (#240292)
  - add options to use shred for deleting files -- adapt patch sent by
    Peter Eckersley <pde@eff.org> (#239934)
  - ignore .cfsaved files by default (#223476)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.6-1
changelog:
  - new upstream version
  - fix #248565 logrotate never rotates /var/log/btmp
  - fix compile warnings
  - tabooext accepts wildcards (related #247816)
  - fix minor errors and update man page (related #250059)
  - fix handling of size directive (related #247410)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.6-2
changelog:
  - fix #427274 - logrotate fails to preserve SELinux file contexts
  - fix #427661 - SELinux stops vsftpd from working correctly


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-10
changelog:
  - fix #604686 - pass currently rotated file as argument to
    postrotate/prerotate script in nosharedscripts mode


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-14
changelog:
  - fix #683622 - add support for ACLs
  - fix #736053 - check for brackets order in config file
  - fix #659705, #659713, #659720 - fixed mistakes in man-page


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-17
changelog:
  - fix #841520 - do not try to change owner of log if it is not needed
  - fix #848131 - fix bad umask value while creating temp file
  - fix #920030 - set SELinux context before compress files creation
  - fix #922169 - remove temp files on error
  - fix #847338 - do not overwrite create directive value by ACL setting
  - fix #847339 - fix race condition between fchmod and acl_set_fd


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-18
changelog:
  - fix #722209 - do not redirect output of logrotate to /dev/null, mark
    logrotate.conf as config
  - fix #1117189 - sort logs according to dateformat when removing the old one
  - fix #625034 - update logrotate.status atomically
  - fix #984965 - fix possible overflow in "create" directive parsing
  - fix #1012485 - use permissions 0700 for cron.daily script


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-19
changelog:
  - fix #1047899 - add support for "maxsize" directive
  - fix #1125769 - add support for "createolddir" directive


author: Jeremy Katz <katzj@redhat.com> 2.00.08-5
changelog:
  - Fix sysfs patch to find sysfs
  - Take patch from dwalsh and tweak a little for setting SELinux contexts on
    device node creation and also do it on the symlink creation.  
    Part of this should probably be pushed down to device-mapper instead


author: Alasdair Kergon <agk@redhat.com> 2.00.10-1
changelog:
  - Update to version 2.00.10, which incorporates the RH-specific patches
    and includes various fixes and enhancements detailed in WHATS_NEW.


author: Alasdair Kergon <agk@redhat.com> 2.00.12-1
changelog:
  - Install default /etc/lvm/lvm.conf.
  - Move non-static binaries to /usr/sbin.
  - Add temporary links in /sbin to lvm.static until rc.sysinit gets updated.


author: Jeremy Katz <katzj@redhat.com> - 2.00.20-2
changelog:
  - add patch for iSeries viodasd support
  - add patch to check file type using stat(2) if d_type == DT_UNKNOWN (#129674)


author: Alasdair Kergon <agk@redhat.com> - 2.00.24-1
changelog:
  - More upstream fixes.  (Always check WHATS_NEW file for details.)
  - Add requested BuildRequires. [bz 124916, 132408]


author: Alasdair Kergon <agk@redhat.com> - 2.01.07-1.0
changelog:
  - Remove build directory from built-in path.
  - Extra /dev scanning required for clustered operation.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-1.0
changelog:
  - Improve detection of external changes affecting internal cache.
  - Add clustered VG attribute.
  - Suppress rmdir opendir error message.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-2.0
changelog:
  - No longer abort read operations if archive/backup directories aren't there.
  - Add runtime directories and file to the package.


author: Alasdair Kergon <agk@redhat.com> - 2.02.11-1.0
changelog:
  - New upstream with numerous fixes and small enhancements.
    (See the WHATS_NEW documentation file for complete upstream changelog.)


author: Alasdair Kergon <agk@redhat.com> - 2.02.12-2
changelog:
  - Remove no-longer-used ldconfig from lvm2-cluster and fix lvmconf
    to cope without the shared library.


author: Alasdair Kergon <agk@redhat.com> - 2.02.16-1
changelog:
  - Fix VG clustered read locks to use PR not CR.
  - Adjust some alignments for ia64/sparc.
  - Fix mirror segment removal to use temporary error segment.
  - Always compile debug logging into clvmd.
  - Add startup timeout to clvmd startup script.
  - Add -T (startup timeout) switch to clvmd.
  - Improve lvm_dump.sh robustness.


author: Alasdair Kergon <agk@redhat.com> - 2.02.17-1
changelog:
  - Add missing pvremove error message when device doesn't exist.
  - When lvconvert allocates a mirror log, respect parallel area constraints.
  - Check for failure to allocate just the mirror log.
  - Support mirror log allocation when there is only one PV: area_count now 0.
  - Fix detection of smallest area in _alloc_parallel_area() for cling policy.
  - Add manpage entry for clvmd -T
  - Fix hang in clvmd if a pre-command failed.


author: Alasdair Kergon <agk@redhat.com> - 2.02.18-1
changelog:
  - Use CFLAGS when linking so mixed sparc builds can supply -m64.
  - Prevent permission changes on active mirrors.
  - Print warning instead of error message if lvconvert cannot zero volume.
  - Add snapshot options to lvconvert man page.
  - dumpconfig accepts a list of configuration variables to display.
  - Change dumpconfig to use --file to redirect output to a file.
  - Avoid vgreduce error when mirror code removes the log LV.
  - Fix ambiguous vgsplit error message for split LV.
  - Fix lvextend man page typo.
  - Use no flush suspending for mirrors.
  - Fix create mirror with name longer than 22 chars.


author: Alasdair Kergon <agk@redhat.com> - 2.02.19-1
changelog:
  - Fix a segfault if an empty config file section encountered.
  - Fix partition table processing after sparc changes.
  - Fix cmdline PE range processing segfault.
  - Move basic reporting functions into libdevmapper.


author: Alasdair Kergon <agk@redhat.com> - 2.02.20-1
changelog:
  - Fix exit statuses of reporting tools.
  - Add some missing close() and fclose() return code checks.
  - Add devices/ignore_suspended_devices to ignore suspended dm devices.
  - Fix refresh_toolcontext() always to wipe persistent device filter cache.
  - Long-lived processes write out persistent dev cache in refresh_toolcontext().
  - Streamline dm_report_field_* interface.
  - Update reporting man pages.
  - Add --clustered to man pages.
  - Add field definitions to report help text.


author: Alasdair Kergon <agk@redhat.com> - 2.02.21-1
changelog:
  - Fix vgsplit to handle mirrors.
  - Reorder fields in reporting field definitions.
  - Fix vgs to treat args as VGs even when PV fields are displayed.
  - Fix md signature check to handle both endiannesses.


author: Alasdair Kergon <agk@redhat.com> - 2.02.22-1
changelog:
  - Add ncurses-static BuildRequires after package split.
  - Fix loading of segment_libraries.
  - If a PV reappears after it was removed from its VG, make it an orphan.
  - Don't update metadata automatically if VGIDs don't match.
  - Fix some vgreduce --removemissing command line validation.
  - Trivial man page corrections (-b and -P).
  - Add global/units to example.conf.
  - Remove readline support from lvm.static.


author: Alasdair Kergon <agk@redhat.com> - 2.02.23-1
changelog:
  - Fix vgrename active LV check to ignore differing vgids.
  - Fix two more segfaults if an empty config file section encountered.
  - Fix a leak in a reporting error path.
  - Add devices/cache_dir & devices/cache_file_prefix, deprecating devices/cache.


author: Alasdair Kergon <agk@redhat.com> - 2.02.24-1
changelog:
  - Add BuildRequires readline-static until makefiles get fixed.
  - Fix processing of exit status in init scripts
  - Fix vgremove to require at least one vg argument.
  - Fix reading of striped LVs in LVM1 format.
  - Flag nolocking as clustered so clvmd startup sees clustered LVs.
  - Add a few missing pieces of vgname command line validation.
  - Support the /dev/mapper prefix on most command lines.


author: Alasdair Kergon <agk@redhat.com> - 2.02.27-1
changelog:
  - Add -f to vgcfgrestore to list metadata backup files.
  - Add pvdisplay --maps implementation.
  - Add devices/preferred_names config regex list for displayed device names.
  - Add vg_mda_count and pv_mda_count columns to reports.
  - Change cling alloc policy attribute character from 'C' to l'.
  - Print warnings to stderr instead of stdout.
  - Fix snapshot cow area deactivation if origin is not active.
  - Reinitialise internal lvmdiskscan variables when called repeatedly.
  - Allow keyboard interrupt during user prompts when appropriate.
  - Fix deactivation code to follow dependencies and remove symlinks.
  - Fix a segfault in device_is_usable() if a device has no table.
  - Fix creation and conversion of mirrors with tags.
  - Add command stub for pvck.
  - Handle vgsplit of an entire VG as a vgrename.
  - Fix vgsplit for lvm1 format (set and validate VG name in PVs metadata).
  - Split metadata areas in vgsplit properly.
  - Fix and clarify vgsplit error messages.
  - Update lists of attribute characters in man pages.
  - Remove unsupported LVM1 options from vgcfgrestore man page.
  - Update vgcfgrestore man page to show mandatory VG name.
  - Update vgrename man page to include UUID and be consistent with lvrename.
  - Add some more debug messages to clvmd startup.
  - Fix thread race in clvmd.
  - Make clvmd cope with quorum devices.
  - Add extra internal error checking to clvmd.
  - Fix missing lvm_shell symbol in lvm2cmd library.
  - Move regex functions into libdevmapper.
  - Add kernel and device-mapper targets versions to lvmdump.
  - Add /sys/block listings to lvmdump.
  - Make lvmdump list /dev recursively.
  - Mark /etc/lvm subdirectories as directories in spec file.


author: Alasdair Kergon <agk@redhat.com> - 2.02.28-1
changelog:
  - vgscan and pvscan now trigger clvmd -R, which should now work.
  - Fix clvmd logging so you can get lvm-level debugging out of it.
  - Allow clvmd debug to be turned on in a running daemon using clvmd -d [-C].
  - Add more cluster info to lvmdump.
  - Fix lvdisplay man page to say LV size is reported in sectors, not KB.
  - Fix loading of persistent cache if cache_dir is used.
  - Only permit --force, --verbose and --debug arguments to be repeated.
  - Add support for renaming mirrored LVs.
  - Add --mirrorlog argument to specify log type for mirrors.
  - Don't leak a file descriptor if flock or fcntl fails.
  - Detect stream write failure reliably.
  - Reduce severity of lstat error messages to very_verbose.
  - Update to use autoconf 2.61, while still supporting 2.57.


author: Alasdair Kergon <agk@redhat.com> - 2.02.29-1
changelog:
  - Make clvmd backup vg metadata on remote nodes.
  - Decode cluster locking state in log message.
  - Change file locking state messages from debug to very verbose.
  - Fix --addtag to drop @ prefix from name.
  - Stop clvmd going haywire if a pre_function fails.
  - Avoid nested vg_reads when processing PVs in VGs and fix associated locking.
  - Attempt to remove incomplete LVs with lvcreate zeroing/activation problems.
  - Add full read_ahead support.
  - Add lv_read_ahead and lv_kernel_read_ahead fields to reports and lvdisplay.
  - Prevent lvconvert -s from using same LV as origin and snapshot.
  - Fix human-readable output of odd numbers of sectors.
  - Add pv_mda_free and vg_mda_free fields to reports for raw text format.
  - Add LVM2 version to 'Generated by' comment in metadata.
  - Show 'not usable' space when PV is too large for device in pvdisplay.
  - Ignore and fix up any excessive device size found in metadata.
  - Fix error message when fixing up PV size in lvm2 metadata (2.02.11).
  - Fix orphan-related locking in pvdisplay and pvs.
  - Fix missing VG unlocks in some pvchange error paths.
  - Add some missing validation of VG names.
  - Detect md superblocks version 1.0, 1.1 and 1.2.
  - Add some pv-related error paths.
  - Handle future sysfs subsystem/block/devices directory structure.
  - Fix a bug in lvm_dump.sh checks for lvm/dmsetup binaries.
  - Fix underquotations in lvm_dump.sh.
  - Print --help output to stdout, not stderr.
  - After a cmdline processing error, don't print help text but suggest --help.
  - Add %PVS extents option to lvresize, lvextend, and lvcreate.
  - Remove no-longer-correct restrictions on PV arg count with stripes/mirrors.
  - Fix strdup memory leak in str_list_dup().
  - Link with -lpthread when static SELinux libraries require that.
  - Detect command line PE values that exceed their 32-bit range.
  - Include strerror string in dev_open_flags' stat failure message.
  - Avoid error when --corelog is provided without --mirrorlog. (2.02.28)
  - Correct --mirrorlog argument name in man pages (not --log).
  - Clear MIRROR_NOTSYNCED LV flag when converting from mirror to linear.
  - Modify lvremove to prompt for removal if LV active on other cluster nodes.
  - Add '-f' to vgremove to force removal of VG even if LVs exist.


author: Alasdair Kergon <agk@redhat.com> - 2.02.30-6
changelog:
  - Remove static libraries and binaries and move most binaries out of /usr.
  - Fix a segfault if using pvs with --all argument.
  - Fix vgreduce PV list processing not to process every PV in the VG.
  - Reinstate VG extent size and stripe size defaults (halved).
  - Set default readahead to twice maximium stripe size.
  - Detect non-orphans without MDAs correctly.
  - Prevent pvcreate from overwriting MDA-less PVs belonging to active VGs.
  - Don't use block_on_error with mirror targets version 1.12 and above.
  - Change vgsplit -l (for unimplemented --list) into --maxlogicalvolumes.
  - Update vgsplit to accept vgcreate options when new VG is destination.
  - Update vgsplit to accept existing VG as destination.
  - Major restructuring of pvmove and lvconvert code, adding stacking support.
  - Add new convert_lv field to lvs output.
  - Permit LV segment fields with PV segment reports.
  - Extend lvconvert to use polldaemon and wait for completion of initial sync.
  - Add seg_start_pe and seg_pe_ranges to reports.
  - Add fsadm interface to filesystem resizing tools.
  - Update --uuid argument description in man pages.
  - Print warning when lvm tools are running as non-root.


author: Alasdair Kergon <agk@redhat.com> - 2.02.31-7
changelog:
  - Avoid readahead error message when using default setting of lvcreate -M1.
  - Fix lvcreate --nosync not to wait for non-happening sync.
  - Add very_verbose lvconvert messages.


author: Alasdair Kergon <agk@redhat.com> - 2.02.32-8
changelog:
  - Fix pvs, vgs, lvs error exit status on some error paths.
  - Fix new parameter validation in vgsplit and test mode.
  - Fix internal metadata corruption in lvchange --resync.


author: Alasdair Kergon <agk@redhat.com> - 2.02.33-9
changelog:
  - Improve internal label caching performance while locks are held.
  - Fix mirror log name construction during lvconvert.


author: Alasdair Kergon <agk@redhat.com> - 2.02.38-1
changelog:
  - libdevmapper: Make dm_hash_iter safe against deletion.
  - libdevmapper: Accept a NULL pointer to dm_free silently.
  - libdevmapper: Calculate string size within dm_pool_grow_object.
  - libdevmapper: Send reporting field help text to stderr not stdout.

  - dmsetup: Add tables_loaded, readonly and suspended columns to reports.
  - dmsetup: Add --nameprefixes for new report output format FIELD=VALUE.

  - Add --nameprefixes to reporting tools for field name prefix output format.
  - Fix return values for reporting commands when run with no PVs, LVs, or VGs.
  - Add omitted unlock_vg() call when sigint_caught() during vg processing.
  - Fix free_count when reading pool metadata.
  - Fix segfault when using pvcreate on a device containing pool metadata.
  - In script-processing mode, stop if any command fails.
  - Warn if command exits with non-zero status code without a prior log_error.
  - Correct config file line numbers in messages when parsing comments.
  - Add missing deactivation after activation failure in lvcreate -Zy.
  - When removing LV symlinks, skip any where the VG name is not determined.
  - Fix vgsplit internal counting of snapshot LVs.
  - Update vgsplit to only restrict split with active LVs involved in split.
  - Fix vgsplit to only move hidden 'snapshotN' LVs when necessary.
  - Update vgsplit man page to reflect lvnames on the cmdline.
  - Update vgsplit to take "-n LogicalVolumeName" on the cmdline.
  - Fix vgsplit error paths to release vg_to lock.
  - Avoid spurious duplicate VG messages referring to VGs that are gone.
  - Drop dev_name_confirmed error message to debug level.
  - Fix setpriority error message to signed int.
  - Add assertions to trap deprecated P_ and V_ lock usage.
  - Avoid using DLM locks with LCK_CACHE type P_ lock requests.
  - Don't touch /dev in vgrename if activation is disabled.
  - Exclude VG_GLOBAL from internal concurrent VG lock counter.
  - Fix vgmerge snapshot_count when source VG contains snapshots.
  - Fix internal LV counter when a snapshot is removed.
  - Fix metadata corruption writing lvm1-formatted metadata with snapshots.
  - Fix lvconvert -m0 allocatable space check.
  - Don't attempt remote metadata backups of non-clustered VGs.
  - Improve preferred_names lvm.conf example.
  - Fix vgdisplay 'Cur LV' field to match lvdisplay output.
  - Fix lv_count report field to exclude hidden LVs.
  - Fix some pvmove error status codes.
  - Indicate whether or not VG is clustered in vgcreate log message.
  - Mention default --clustered setting in vgcreate man page.
  - Fix vgreduce to use vg_split_mdas to check sufficient mdas remain.
  - Update lvmcache VG lock state for all locking types now.
  - Fix output if overriding command_names on cmdline.
  - Add check to vg_commit() ensuring VG lock held before writing new VG metadata.
  - Add validation of LV name to pvmove -n.
  - Add some basic internal VG lock validation.
  - Fix vgsplit internal counting of snapshot LVs.
  - Update vgsplit to only restrict split with active LVs involved in split.
  - Fix vgsplit to only move hidden 'snapshotN' LVs when necessary.
  - Update vgsplit man page to reflect lvnames on the cmdline.
  - Update vgsplit to take "-n LogicalVolumeName" on the cmdline.
  - Fix vgsplit error paths to release vg_to lock.
  - Fix vgsplit locking of new VG.
  - Avoid erroneous vgsplit error message for new VG.
  - Suppress duplicate message when lvresize fails because of invalid vgname.
  - Cache VG metadata internally while VG lock is held.
  - Fix redundant lvresize message if vg doesn't exist.
  - Make clvmd-cman use a hash rather than an array for node updown info.
  - Decode numbers in clvmd debugging output.
  - Fix uninitialised mutex in clvmd if all daemons are not running at startup.
  - Add config file overrides to clvmd when it reads the active LVs list.
  - Make clvmd refresh the context correctly when lvm.conf is updated.
  - Fix another allocation bug with clvmd and large node IDs.
  - Fix uninitialised variable in clvmd that could cause odd hangs.
  - Correct command name in lvmdiskscan man page.
  - clvmd no longer crashes if it sees nodeids over 50.
  - Fix potential deadlock in clvmd thread handling.
  - Update usage message for clvmd.
  - Fix clvmd man page not to print <br> and clarified debug options.
  - Escape double quotes and backslashes in external metadata and config data.
  - Correct a function name typo in _line_append error message.
  - Fix resetting of MIRROR_IMAGE and VISIBLE_LV after removal of LV.
  - Fix remove_layer_from_lv to empty the LV before removing it.
  - Add missing no-longer-used segs_using_this_lv test to check_lv_segments.
  - Fix lvconvert detection of mirror conversion in progress.
  - Avoid automatic lvconvert polldaemon invocation when -R specified.
  - Fix 'pvs -a' to detect VGs of PVs without metadata areas.
  - Divide up internal orphan volume group by format type.
  - Fix lvresize to support /dev/mapper prefix in the LV name.
  - Fix lvresize to pass new size to fsadm when extending device.
  - Fix unfilled parameter passed to fsadm from lvresize.
  - Update fsadm to call lvresize if the partition size differs (with option -l).
  - Fix fsadm to support VG/LV names.


author: Alasdair Kergon <agk@redhat.com> - 2.02.38-2
changelog:
  - dmsetup: Add --unquoted and --rows to 'info -c' command.
  - libdevmapper: Fix inverted no_flush debug message.


author: Alasdair Kergon <agk@redhat.com> - 2.02.39-3
changelog:
  - Fix up cache for PVs without mdas after consistent VG metadata is processed.
  - Update validation of safe mirror log type conversions in lvconvert.
  - Fix lvconvert to disallow snapshot and mirror combinations.
  - Fix reporting of LV fields alongside unallocated PV segments.
  - Add --unquoted and --rows to reporting tools.
  - Avoid undefined status code after _memlock commands in lvm shell.
  - Fix and improve readahead 'auto' calculation for stripe_size.
  - Fix lvchange output for -r auto setting if auto is already set.
  - Fix add_mirror_images not to dereference uninitialized log_lv upon failure.
  - Add --force to lvextend and lvresize.
  - Fix vgchange to not activate component mirror volumes directly.


author: Fabio M. Di Nitto <fdinitto@redhat.cm> - 2.02.39-5
changelog:
  - Add BuildRequires on cmanlib-devel. This is required after libcman split
    from cman and cman-devel into cmanlib and cmanlib-devel.
  - Make versioned BuildRequires on cman-devel and cmanlib-devel more strict
    to guarantee to get the right version.


author: Alasdair Kergon <agk@redhat.com> - 2.02.43-1
changelog:
  - Upstream merge of device-mapper and lvm2 source.
  - Correct prototype for --permission on lvchange and lvcreate man pages.
  - Exit with non-zero status from vgdisplay if couldn't show any requested VG.
  - libdevmapper.pc: Use simplified x.y.z version number.
  - Accept locking fallback_to_* options in the global section as documented.
  - Several fixes to lvconvert involving mirrors.
  - Avoid overwriting in-use on-disk text metadata when metadataarea fills up.
  - Generate man pages from templates and include version.
  - Fix misleading error message when there are no allocatable extents in VG.
  - Fix handling of PVs which reappeared with old metadata version.
  - Fix validation of --minor and --major in lvcreate to require -My always.
  - Allow lvremove to remove LVs from VGs with missing PVs.
  - In VG with PVs missing, by default allow activation of LVs that are complete.
  - Require --force with --removemissing in vgreduce to remove partial LVs.
  - No longer write out PARTIAL flag into metadata backups.
  - Treat new default activation/missing_stripe_filler "error" as an error target.
  - Add devices/md_chunk_alignment to lvm.conf.
  - Pass struct physical_volume to pe_align and adjust for md chunk size.
  - Avoid shuffling remaining mirror images when removing one, retaining primary.
  - Prevent resizing an LV while lvconvert is using it.
  - Avoid repeatedly wiping cache while VG_GLOBAL is held in vgscan & pvscan.
  - Fix pvresize to not allow resize if PV has two metadata areas.
  - Fix setting of volume limit count if converting to lvm1 format.
  - Fix vgconvert logical volume id metadata validation.
  - Fix lvmdump metadata gather option (-m) to work correctly.
  - Fix allocation bug in text metadata format write error path.
  - Fix vgcfgbackup to properly check filename if template is used.
  - vgremove tries to remove lv snapshot first.
  - Improve file descriptor leak detection to display likely culprit and filename.
  - Avoid looping forever in _pv_analyze_mda_raw used by pvck.
  - Change lvchange exit status to indicate if any part of the operation failed.
  - Fix pvchange and pvremove to handle PVs without mdas.
  - Fix pvchange -M1 -u to preserve existing extent locations when there's a VG.
  - Cease recognising snapshot-in-use percentages returned by early devt kernels.
  - Add backward-compatible flags field to on-disk format_text metadata.
  - libdevmapper: Only resume devices in dm_tree_preload_children if size changes.
  - libdevmapper: Extend deptree buffers so the largest possible device numbers fit.
  - libdevmapper: Underline longer report help text headings.


author: Alasdair Kergon <agk@redhat.com> - 2.02.44-1
changelog:
  - Add --nameprefixes, --unquoted, --rows to pvs, vgs, lvs man pages.
  - Fix lvresize size conversion for fsadm when block size is not 1K.
  - Fix pvs segfault when run with orphan PV and some VG fields.
  - Display a 'dev_size' of zero for missing devices in reports.
  - Add pv_mda_size to pvs and vg_mda_size to vgs.
  - Fix lvmdump /sys listing to include virtual devices directory.
  - Add "--refresh" functionality to vgchange and vgmknodes.
  - Avoid exceeding LV size when wiping device.
  - Calculate mirror log size instead of using 1 extent.
  - Ensure requested device number is available before activating with it.
  - Fix incorrect exit status from 'help <command>'.
  - Fix vgrename using UUID if there are VGs with identical names.
  - Fix segfault when invalid field given in reporting commands.
  - Use better random seed value in temp file creation.
  - Add read_urandom to read /dev/urandom. Use in uuid calculation.
  - Fix race in vgcreate that would result in second caller overwriting first.
  - Fix uninitialised lv_count in vgdisplay -c.
  - Don't skip updating pvid hash when lvmcache_info struct got swapped.
  - Fix startup race in clvmd.
  - Cope with snapshot dependencies when removing a whole VG with lvremove.
  - Make man pages and tool help text consistent using | for alternative options.
  - Add "all" field to reports expanding to all fields of report type.
  - Enforce device name length and character limitations in libdm.


author: Alasdair Kergon <agk@redhat.com> - 2.02.45-1
changelog:
  - Update clusterlib and corosync dependencies.
  - Attempt proper clean up in child before executing fsadm or modprobe.
  - Do not scan devices if reporting only attributes from PV label.
  - Use pkgconfig to obtain corosync library details during configuration.
  - Fix error returns in clvmd-corosync interface to DLM.
  - Add --refresh to vgchange and vgmknodes man pages.
  - Pass --test from lvresize to fsadm as --dry-run.
  - Prevent fsadm from checking mounted filesystems.
  - No longer treats any other key as 'no' when prompting in fsadm.
  - Add --dataalignment to pvcreate to specify alignment of data area.
  - Fix unblocking of interrupts after several commands.
  - Provide da and mda locations in debug message when writing text format label.
  - Mention the restriction on file descriptors at invocation on the lvm man page.
  - Index cached vgmetadata by vgid not vgname to cope with duplicate vgnames.
  - No longer require kernel and metadata major numbers to match.
  - If kernel supports only one dm major number, use in place of any supplied.
  - Add option to /etc/sysconfig/cluster to select cluster type for clvmd.
  - Allow clvmd to start up if its lockspace already exists.
  - Separate PV label attributes which do not need parse metadata when reporting.
  - Remove external dependency on the 'cut' command from fsadm.
  - Fix pvs segfault when pv mda attributes requested for unavailable PV.
  - Add fsadm support for reszing ext4 filesysystems.
  - Change lvm2-cluster to corosync instead of cman.
  - Fix some old changelog typos in email addresses.


author: Alasdair Kergon <agk@redhat.com> - 2.02.47-1
changelog:
  - Inherit readahead setting from underlying devices during activation.
  - Detect LVs active on remote nodes by querying locks if supported.
  - Enable online resizing of mirrors.
  - Use suspend with flush when device size was changed during table preload.
  - Implement query_resource_fn for cluster_locking.
  - Support query_resource_fn in locking modules.
  - Fix pvmove to revert operation if temporary mirror creation fails.
  - Fix metadata export for VG with missing PVs.
  - Add vgimportclone and install it and the man page by default.
  - Force max_lv restriction only for newly created LV.
  - Do not query nonexistent devices for readahead.
  - Reject missing PVs from allocation in toollib.
  - Fix PV datalignment for values starting prior to MDA area. (2.02.45)
  - Add sparse devices: lvcreate -s --virtualoriginsize (hidden zero origin).
  - Fix minimum width of devices column in reports.
  - Add lvs origin_size field.
  - Implement lvconvert --repair for repairing partially-failed mirrors.
  - Fix vgreduce --removemissing failure exit code.
  - Fix remote metadata backup for clvmd.
  - Fix metadata backup to run after vg_commit always.
  - Fix pvs report for orphan PVs when segment attributes are requested.
  - Fix pvs -a output to not read volume groups from non-PV devices.
  - Introduce memory pools per volume group (to reduce memory for large VGs).
  - Always return exit error status when locking of volume group fails.
  - Fix mirror log convert validation question.
  - Enable use of cached metadata for pvs and pvdisplay commands.
  - Fix memory leak in mirror allocation code.
  - Save and restore the previous logging level when log level is changed.
  - Fix error message when archive initialization fails.
  - Make sure clvmd-corosync releases the lockspace when it exits.
  - Fix segfault for vgcfgrestore on VG with missing PVs.
  - Block SIGTERM & SIGINT in clvmd subthreads.
  - Detect and conditionally wipe swapspace signatures in pvcreate.
  - Fix maximal volume count check for snapshots if max_lv set for volume group.
  - Fix lvcreate to remove unused cow volume if the snapshot creation fails.
  - Fix error messages when PV uuid or pe_start reading fails.
  - Flush memory pool and fix locking in clvmd refresh and backup command.
  - Fix unlocks in clvmd-corosync. (2.02.45)
  - Fix error message when adding metadata directory to internal list fails.
  - Fix size and error message of memory allocation at backup initialization.
  - Remove old metadata backup file after renaming VG.
  - Restore log_suppress state when metadata backup file is up-to-date.
  - Export dm_tree_node_size_changed() from libdevmapper.
  - Fix segfault when getopt processes dmsetup -U, -G and -M options.
  - Add _smp_mflags to compilation and remove DESTDIR.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 2.02.47-2
changelog:
  - BuildRequire newer version of corosynclib (0.97-1) to link against
    latest libraries version (soname 4.0.0).
  - Add lvm2-2_02_48-cluster-cpg-new-api.patch to port clvmd-corosync
    to new corosync cpg API.


author: Alasdair Kergon <agk@redhat.com> - 2.02.48-1
changelog:
  - Abort if automatic metadata correction fails when reading VG to update it.
  - Don't fallback to default major number in libdm: use dm_task_set_major_minor.
  - Explicitly request fallback to default major number in device mapper.
  - Ignore suspended devices during repair.
  - Suggest using lvchange --resync when adding leg to not-yet-synced mirror.
  - Destroy toolcontext on clvmd exit to avoid memory pool leaks.
  - Fix lvconvert not to poll mirror if no conversion in progress.
  - Fix memory leaks in toolcontext error path.
  - Reinstate partial activation support in clustered mode.
  - Allow metadata correction even when PVs are missing.
  - Use 'lvm lvresize' instead of 'lvresize' in fsadm.
  - Do not use '-n' realine option in fsadm for rescue disk compatiblity.
  - Round up requested readahead to at least one page and print warning.
  - Try to repair vg before actual vgremove when force flag provided.
  - Unify error messages when processing inconsistent volume group.
  - Introduce lvconvert --use_policies (repair policy according to lvm.conf).
  - Fix rename of active snapshot with virtual origin.
  - Fix convert polling to ignore LV with different UUID.
  - Cache underlying device readahead only before activation calls.
  - Fix segfault when calculating readahead on missing device in vgreduce.
  - Remove verbose 'visited' messages.
  - Handle multi-extent mirror log allocation when smallest PV has only 1 extent.
  - Add LSB standard headers and functions (incl. reload) to clvmd initscript.
  - When creating new LV, double-check that name is not already in use.
  - Remove /dev/vgname/lvname symlink automatically if LV is no longer visible.
  - Rename internal vorigin LV to match visible LV.
  - Suppress 'removed' messages displayed when internal LVs are removed.
  - Fix lvchange -a and -p for sparse LVs.
  - Fix lvcreate --virtualsize to activate the new device immediately.
  - Make --snapshot optional with lvcreate --virtualsize.
  - Generalise --virtualoriginsize to --virtualsize.
  - Skip virtual origins in process_each_lv_in_vg() without --all.
  - Fix counting of virtual origin LVs in vg_validate.
  - Attempt to load dm-zero module if zero target needed but not present.
  - Add crypt target handling to libdevmapper tree nodes.
  - Add splitname command to dmsetup.
  - Add subsystem, vg_name, lv_name, lv_layer fields to dmsetup reports.
  - Make mempool optional in dm_split_lvm_name() in libdevmapper.


author: Fabio M. Di Nitto <fdinitto@redhat.com> 2.02.48-2
changelog:
  - BuildRequires and Requires on stable versions of both corosync-lib (1.0.0-1)
    and cluster-lib (3.0.0-20).


author: Alasdair Kergon <agk@redhat.com> - 2.02.49-1
changelog:
  - Exclude VG_GLOBAL from vg_write_lock_held so scans open devs read-only again.
  - Fix dev name mismatch in vgcreate man page example.
  - Check md devices for a partition table during device scan.
  - Add extended device (blkext) and md partition (mdp) types to filters.
  - Make text metadata read errors for segment areas more precise.
  - Fix text segment metadata read errors to mention correct segment name.
  - Include segment and LV names in text segment import error messages.
  - Fix memory leak in vgsplit when re-reading the vg.
  - Permit several segment types to be registered by a single shared object.
  - Update the man pages to document size units uniformly.
  - Allow commandline sizes to be specified in terms of bytes and sectors.
  - Update 'md_chunk_alignment' to use stripe-width to align PV data area.
  - Fix segfault in vg_release when vg->cmd is NULL.
  - Add dm_log_with_errno and dm_log_with_errno_init, deprecating the old fns.
  - Fix whitespace in linear target line to fix identical table line detection.
  - Add device number to more log messages during activation.


author: Alasdair Kergon <agk@redhat.com> - 2.02.50-1
changelog:
  - Add libs and devel subpackages to include shared libraries for applications.
    N.B. The liblvm2app API is not frozen yet and may still be changed
    Send any feedback to the mailing list lvm-devel@redhat.com.
  - Remove obsolete --with-dmdir from configure.
  - Add global/wait_for_locks to lvm.conf so blocking for locks can be disabled.
  - Fix race condition with vgcreate and vgextend on same device since 2.02.49.
  - Add an API version number, LVM_LIBAPI, to the VERSION string.
  - Return EINVALID_CMD_LINE not success when invalid VG name format is used.
  - Remove unnecessary messages after vgcreate/vgsplit code change in 2.02.49.
  - Store any errno and error messages issued while processing each command.


author: Alasdair Kergon <agk@redhat.com> - 2.02.51-2
changelog:
  - Fix clvmd locking broken in 2.02.50-1.
  - Only change LV /dev symlinks on ACTIVATE not PRELOAD (so not done twice).
  - Make lvconvert honour log mirror options combined with downconversion.
  - Add devices/data_alignment_detection to lvm.conf.
  - Add devices/data_alignment_offset_detection to lvm.conf.
  - Add --dataalignmentoffset to pvcreate to shift start of aligned data area.
  - Update synopsis in lvconvert manpage to mention --repair.
  - Document -I option of clvmd in the man page.


author: Milan Broz <mbroz@redhat.com> - 2.02.51-3
changelog:
  - Fix global locking in PV reporting commands (2.02.49).
  - Fix pvcreate on a partition (2.02.51).
  - Build clvmd with both cman and corosync support.


author: Alasdair Kergon <agk@redhat.com> - 2.02.52-1
changelog:
  - Prioritise write locks over read locks by default for file locking.
  - Add local lock files with suffix ':aux' to serialise locking requests.
  - Fix readonly locking to permit writeable global locks (for vgscan). (2.02.49)
  - Make readonly locking available as locking type 4.
  - Fix global locking in PV reporting commands (2.02.49).
  - Make lvchange --refresh only take a read lock on volume group.
  - Fix race where non-blocking file locks could be granted in error.
  - Fix pvcreate string termination in duplicate uuid warning message.
  - Don't loop reading sysfs with pvcreate on a non-blkext partition (2.02.51).
  - Fix vgcfgrestore error paths when locking fails (2.02.49).
  - Make clvmd check corosync to see what cluster interface it should use.
  - Fix vgextend error path - if ORPHAN lock fails, unlock / release vg (2.02.49).
  - Clarify use of PE ranges in lv{convert|create|extend|resize} man pages.
  - Restore umask when device node creation fails.
  - Check kernel vsn to use 'block_on_error' or 'handle_errors' in mirror table.


author: Alasdair Kergon <agk@redhat.com> - 2.02.52-2
changelog:
  - Build dmeventd and place into a separate set of subpackages.
  - Remove no-longer-needed BuildRoot tag and buildroot emptying at install.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.52-3
changelog:
  - Enable udev synchronisation code.
  - Install default udev rules for device-mapper and LVM2.
  - Add BuildRequires: libudev-devel.
  - Add Requires: libudev (to check udev is running).
  - Add Requires: util-linux-ng (blkid used in udev rules).


author: Alasdair Kergon <agk@redhat.com> - 2.02.53-1
changelog:
  - Create any directories in /dev with umask 022. (#507397)
  - Handle paths supplied to dm_task_set_name by getting name from /dev/mapper.
  - Add splitname and --yes to dmsetup man page.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.56-1
changelog:
  - Update to latest upstream release with various fixes and enhancements
    detailed in WHATS_NEW.
    Resolves: #463271 #533275


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.57-1
changelog:
  - Add --splitmirrors to lvconvert to split off part of a mirror.
  - Allow vgremove to remove a VG with PVs missing after a prompt.
  - Add activation/udev_rules config option in lvm.conf.
  - Add --poll flag to vgchange and lvchange to control background daemon launch.
  - Impose limit of 8 mirror images to match the in-kernel kcopyd restriction.
  - Log failure type and recognise type 'F' (flush) in dmeventd mirror plugin.
  - Add --noudevrules option for dmsetup to disable /dev node management by udev.
  - Fix 'dmsetup info -c -o all' to show all fields.
  - Fix coredump and memory leak for 'dmsetup help -c'. 
  - Rename mirror_device_fault_policy to mirror_image_fault policy.
  - Use extended status of new kernel snapshot target 1.8.0 to detect when empty.
  - Allow use of precommitted metadata when a PV is missing.
  - Add global/abort_on_internal_errors to lvm.conf to assist testing.
  - If aborting due to internal error, always send that message to stderr.
  - Keep log type consistent when changing mirror image count.
  - Exit with success in lvconvert --repair --use-policies on failed allocation.
  - Ensure any background daemon exits without duplicating parent's functionality.
  - Change background daemon process names to "(lvm2)".
  - Fix internal lock state after forking.
  - Remove empty PV devices if lvconvert --repair is using defined policies.
  - Use fixed buffer to prevent stack overflow in persistent filter dump.
  - Propagate metadata commit and revert notifications to other cluster nodes.
  - Fix metadata caching and lock state propagation to remote nodes in clvmd.
  - Properly decode all flags in clvmd messages including VG locks.
  - Drop cached metadata after device was auto-repaired and removed from VG.
  - Clear MISSING_PV flag if PV reappeared and is empty.
  - Fix removal of multiple devices from a mirror.
  - Also clean up PVs flagged as missing in vgreduce --removemissing --force.
  - Fix some pvresize and toollib error paths with missing VG releases/unlocks.
  - Explicitly call suspend for temporary mirror layer.
  - Add memlock information to do_lock_lv debug output.
  - Always bypass calls to remote cluster nodes for non-clustered VGs. 
  - Permit implicit cluster lock conversion in pre/post callbacks on local node.
  - Permit implicit cluster lock conversion to the lock mode already held.
  - Fix lock flag masking in clvmd so intended code paths get invoked.
  - Remove newly-created mirror log from metadata if initial deactivation fails.
  - Improve pvmove error message when all source LVs are skipped.
  - Fix memlock imbalance in lv_suspend if already suspended.
  - Fix pvmove test mode not to poll (and fail).
  - Fix vgcreate error message if VG already exists.
  - Fix tools to use log_error when aborted due to user response to prompt.
  - Fix ignored readahead setting in lvcreate --readahead.
  - Fix clvmd memory leak in lv_info_by_lvid by calling release_vg.
  - If LVM_UDEV_DISABLE_CHECKING is set in environment, disable udev warnings.
  - If DM_UDEV_DISABLE_CHECKING is set in environment, disable udev warnings.
  - Always set environment variables for an LVM2 device in 11-dm-lvm.rules.
  - Disable udev rules for change events with DISK_RO set. 
  - Add dm_tree_add_dev_with_udev_flags to provide wider support for udev flags.
  - Correct activated or deactivated text in vgchange summary message.
  - Fix fsadm man page typo (fsdam).
    Resolves: #549870


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.58-1
changelog:
  - Fix clvmd automatic target module loading crash.
  - Fix allocation code not to stop at the first area of a PV that fits.
  - Add support for the "snapshot-merge" kernel target (2.6.33-rc1).
  - Add --merge to lvconvert to merge a snapshot into its origin.
  - Disable openais and corosync support for clvmd.
    Resolves: #249478 #493055


author: Alasdair Kergon <agk@redhat.com> - 2.02.60-1
changelog:
  - Add cmirror subpackage for clustered mirrors.
  - Sleep before first progress check iff pvmove/lvconvert interval has prefix '+'.
  - Fix first syslog message prefix for dmeventd plugins.
  - Make failed locking initialisation messages more descriptive.
  - Add cman requires to cluster subpackage.
  - Set 'preferred_names' in default lvm.conf.
  - Add libdevmapper-event-lvm2.so to serialise dmeventd plugin liblvm2cmd use.
  - Stop dmeventd trying to access already-removed snapshots.
  - Fix clvmd to never scan suspended devices.
  - Fix detection of completed snapshot merge.
  - Improve snapshot merge metadata import validation.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.61-1
changelog:
  - Add %ORIGIN support to lv{create,extend,reduce,resize} --extents.
  - Accept a list of LVs with 'lvconvert --merge @tag' using process_each_lv.
  - Remove false "failed to find tree node" error when activating merging origin.
  - Exit with success when lvconvert --repair --use-policies performs no action.
  - Avoid unnecessary second resync when adding mimage to core-logged mirror.
  - Make clvmd -V return status zero.
  - Fix cmirrord segfault in clog_cpg list processing when converting mirror log. 
  - Deactivate temporary pvmove mirror cluster-wide when activating it fails.
  - Add missing metadata vg_reverts in pvmove error paths.
  - Unlock shared lock in clvmd if activation calls fail.
  - Add lvm_pv_get_size, lvm_pv_get_free and lvm_pv_get_dev_size to lvm2app.
  - Change lvm2app to return all sizes in bytes as documented (not sectors).
  - Exclude internal VG names and uuids from lists returned through lvm2app.
  - Add LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES environment variable.
  - Add DM_UDEV_DISABLE_LIBRARY_FALLBACK udev flag to rely on udev only.
  - Remove hard-coding that skipped _mimage devices from 11-dm-lvm.rules.
  - Export dm_udev_create_cookie function to create new cookies on demand.
  - Add --udevcookie, udevcreatecookie and udevreleasecookie to dmsetup.
  - Set udev state automatically instead of using DM_UDEV_DISABLE_CHECKING.
  - Set udev state automatically instead of using LVM_UDEV_DISABLE_CHECKING.
  - Remove pointless versioned symlinks to dmeventd plugin libraries.
    Resolves: #561422 #561423 #563321


author: Alasdair Kergon <agk@redhat.com> - 2.02.64-1
changelog:
  - Avoid pointless initialisation when the 'version' command is run directly.
  - Fix memory leak for invalid regex pattern input.
  - Display invalid regex pattern for filter configuration in case of error.
  - Fix -M and --type to use strings, not pointers that change on config refresh.
  - Fix lvconvert error message when existing mirrored LV is not found.
  - Set appropriate udev flags for reserved LVs.
  - Disallow the direct removal of a merging snapshot.
  - Don't preload the origin when removing a snapshot whose merge is pending.
  - Disallow the addition of mirror images while a conversion is happening.
  - Disallow primary mirror image removal when mirror is not in-sync.
  - Remove obsolete --name parameter from vgcfgrestore.
  - Add -S command to clvmd to restart the daemon preserving exclusive locks.
  - Increment lvm2app version from 1 to 2 (memory allocation changes).
  - Change lvm2app memory alloc/free for pv/vg/lv properties.
  - Change daemon lock filename from lvm2_monitor to lvm2-monitor for consistency.
  - Add support for new IMPORT{db} udev rule available in udev v152.
  - Add DM_UDEV_PRIMARY_SOURCE_FLAG udev flag to recognize proper DM events.
  - Also include udev libs in libdevmapper.pc.
  - Cache bitset locations to speed up _calc_states.
  - Add a regex optimisation pass for shared prefixes and suffixes.
  - Add dm_bit_and and dm_bitset_equal to libdevmapper.
  - Speed up dm_bit_get_next with ffs().
  - Remove 'lvmconf --lockinglibdir' from cluster post: locking is now built-in.
  - Move libdevmapper-event-lvm2.so to devel package.
  - Explicitly specify libdevmapper-event.so* attributes.
  - Drop support for upgrades from very old versions that used lvm not lvm2.
  - Move libdevmapper-event plug-in libraries into new device-mapper subdirectory.
  - Don't verify lvm.conf contents when using rpm --verify.
  - Move development links to shared objects to /usr.
  - Change libdevmapper deactivation to fail if device is open.
  - Wipe memory buffers for libdevmapper dm-ioctl parameters before releasing.
  - Add support for ioctl's DM_UEVENT_GENERATED_FLAG.
  - Allow incomplete mirror restore in lvconvert --repair upon insufficient space.
  - Do not reset position in metadata ring buffer on vgrename and vgcfgrestore.
  - Allow VGs with active LVs to be renamed.
  - Only pass visible LVs to tools in cmdline VG name/tag expansions without -a.
  - Use C locale and mlockall in clvmd and dmeventd.
  - Mask LCK_HOLD in cluster VG locks for upgrade compatibility with older clvmd.
  - Add activation/polling_interval to lvm.conf as --interval default.
  - Don't ignore error if resuming any LV fails when resuming groups of LVs.
  - Skip closing persistent filter cache file if open failed.
  - Permit mimage LVs to be striped in lvcreate, lvresize and lvconvert.
  - Fix pvmove allocation to take existing parallel stripes into account.
  - Fix incorrect removal of symlinks after LV deactivation fails.
  - Fix is_partitioned_dev not to attempt to reopen device.
  - Fix another thread race in clvmd.
  - Improve vg_validate to detect some loops in lists.
  - Change most remaining log_error WARNING messages to log_warn.
  - Always use blocking lock for VGs and orphan locks.
  - Allocate all memory for segments from private VG mempool.
  - Optimise searching PV segments for seeking the most recently-added.
  - Remove duplicated vg_validate checks when parsing cached metadata.
  - Use hash table of LVs to speed up parsing of text metadata with many LVs.
  - Fix two vg_validate messages, adding whitespace and parentheses.
  - When dmeventd is not forking because of -d flag, don't kill parent process.
  - Fix dso resource leak in error path of dmeventd.
  - Fix --alloc contiguous policy only to allocate one set of parallel areas.
  - Do not allow {vg|lv}change --ignoremonitoring if on clustered VG.
  - Add ability to create mirrored logs for mirror LVs.
  - Fix clvmd cluster propagation of dmeventd monitoring mode.
  - Allow ALLOC_ANYWHERE to split contiguous areas.
  - Add some assertions to allocation code.
  - Introduce pv_area_used into allocation algorithm and add debug messages.
  - Add activation/monitoring to lvm.conf.
  - Add --monitor and --ignoremonitoring to lvcreate.
  - Don't allow resizing of internal logical volumes.
  - Avoid scanning all pvs in the system if operating on a device with mdas.
  - Disable long living process flag in lvm2app library.
  - Fix pvcreate device md filter check.
  - Suppress repeated errors about the same missing PV uuids.
  - Bypass full device scans when using internally-cached VG metadata.
  - Only do one full device scan during each read of text format metadata.
  - Look up missing PVs by uuid not dev_name in pvs to avoid invalid stat.
  - Rewrite clvmd init script.
  - Add default alternative to mlockall using mlock to reduce pinned memory size.
  - Add use_mlockall and mlock_filter to activation section of lvm.conf.
  - Handle misaligned devices that report alignment_offset of -1.
  - Extend core allocation code in preparation for mirrored log areas.
  - No longer fall back to looking up active devices by name if uuid not found.
  - Don't touch /dev in vgmknodes if activation is disabled.
  - Add --showkeys parameter description to dmsetup man page.
  - Add --help option as synonym for help command.
  - Add lvm2app functions lvm_{vg|lv}_{get|add|remove}_tag() functions.
  - Refactor snapshot-merge deptree and device removal to support info-by-uuid.
  - Change spec file to excluding cluster components from the build on s390.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.65-1
changelog:
  - Disallow vgchange --clustered if there are active mirrors or snapshots.
  - Fix truncated total size displayed by pvscan.
  - Skip internal lvm devices in scan if ignore_suspended_devices is set.
  - Do not merge old device cache after we run full scan. (2.02.56)
  - Add new --sysinit compound option to vgchange and lvchange.
  - Fix clvmd init script never to deactivate non-clustered volume groups.
  - Drop duplicate errors for read failures and missing devices to verbose level.
  - Do not print encryption key in message debug output (cryptsetup luksResume).
  - Use -d to control level of messages sent to syslog by dmeventd.
  - Change -d to -f to run dmeventd in foreground.
  - Fix udev flags on remove in create_and_load error path.
  - Add dm_list_splice() function to join two lists together.
  - Use /bin/bash for scripts with bashisms.
  - Switch Libs.private to Requires.private in devmapper.pc and lvm2app.pc.
  - Use pkgconfig Requires.private for devmapper-event.pc.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.66-2
changelog:
  - Simplify and fix Requires package headers.
  - If unable to obtain snapshot percentage leave value blank on reports.
  - Use new install_system_dirs and install_initscripts makefile targets.
  - Add lvm2app functions to lookup a vgname from a pvid and pvname.
  - Change internal processing of PVs in pvchange.
  - Validate internal lock ordering of orphan and VG_GLOBAL locks.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.68-1
changelog:
  - Have device-mapper-libs require device-mapper (circular) for udev rules.
  - Clear exec_prefix.
  - Use early udev synchronisation and update of dev nodes for clustered mirrors.
  - Fix udev rules to handle spurious events properly.
  - Add lv_path to reports to offer full /dev pathname.
  - Avoid abort when generating cmirror status.
  - Fix clvmd initscript status to print only active clustered LVs. 
  - Fix segfault in clvmd -R if no response from daemon received.
  - Honour log argument when down-converting stacked mirror.
  - Sleep to workaround clvmd -S race: socket closed early and server drops cmd. 
  - Exit successfully when using -o help (but not -o +help) with LVM reports.
  - Add man pages for lvmconf, dmeventd and non-existent lvmsadc and lvmsar tools.
  - Add --force, --nofsck and --resizefs to lvresize/extend/reduce man pages.
  - Fix lvm2cmd example in documentation.
  - Fix typo in warning message about missing device with allocated data areas.
  - Add device name and offset to raw_read_mda_header error messages.
  - Allow use of lvm2app and lvm2cmd headers in C++ code.
  - Require partial option in lvchange --refresh for partial LVs.
  - Don't merge unchanged persistent cache file before dumping if tool scanned.
  - Avoid selecting names under /dev/block if there is an alternative.
  - Fix clvmd initscript restart command to start clvmd if not yet running.
  - Handle failed restart of clvmd using -S switch properly.
  - Use built-in absolute paths in clvmd (clvmd restart and PV and LV queries).
  - Consistently return ECMD_FAILED if interrupted processing multiple LVs.
  - Add --type parameter description to the lvcreate man page.
  - Document 'clear' in dmsetup man page.
  - Replace strncmp kernel version number checks with proper ones.
  - Update clustered log kernel module name to log-userspace for 2.6.31 onwards.
  - Support autoloading of dm-mod module for kernels from 2.6.35.
  - Add dm_tree_node_set_presuspend_node() to presuspend child when deactivating.
  - Do not fail lvm_init() if init_logging() or _init_rand() generates an errno.
  - Fix incorrect memory pool deallocation while using vg_read for files.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.69-1
changelog:
  - Add metadata/vgmetadatacopies to lvm.conf.
  - Add --metadataignore to pvcreate and vgextend.
  - Add vg_mda_copies, pv_mda_used_count and vg_mda_used_count to reports.
  - Describe --vgmetadatacopies in lvm.conf and other man pages.
  - Add --[vg]metadatacopies to select number of mdas to use in a VG.
  - Make the metadata ignore bit control read/write metadata areas in a PV.
  - Add pvchange --metadataignore to set or clear a metadata ignore bit. 
  - Refactor metadata code to prepare for --metadataignore / --vgmetadatacopies.
  - Ensure region_size of mirrored log does not exceed its full size.
  - Preload libc locale messages to prevent reading it in memory locked state.
  - Fix handling of simultaneous mirror image and mirrored log image failure.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.69-2
changelog:
  - Always pass unsuspended dm devices through persistent filter to other filters.
  - Move test for suspended dm devices ahead of other filters.
  - Fix another segfault in clvmd -R if no response from daemon received. (2.02.68)
  - Preserve memlock balance in clvmd when activation triggers a resume.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.72-2
changelog:
  - Make vgck warn about missing PVs.
  - Revert failed table load preparation after "create, load and resume".
  - Check if cluster log daemon is running before allowing cmirror create.
  - Add dm_create_lockfile to libdm and use for pidfiles for all daemons.
  - Correct LV list order used by lvconvert when splitting a mirror.
  - Check if LV with specified name already exists when splitting a mirror.
  - Fix suspend/resume logic for LVs resulting from splitting a mirror.
  - Fix possible hang when all mirror images of a mirrored log fail.
  - Adjust auto-metadata repair and caching logic to try to cope with empty mdas.
  - Update pvcreate, {pv|vg}change, and lvm.conf man pages about metadataignore.
  - Prompt if metadataignore with vgextend or pvchange would adjust vg_mda_copies.
  - Adjust vg_mda_copies if metadataignore given with vgextend or pvchange.
  - Speed up the regex matcher.
  - Use "nowatch" udev rule for inappropriate devices.
  - Document LVM fault handling in lvm_fault_handling.txt.
  - Clarify help text for vg_mda_count.
  - Add more verbose messages while checking volume_list and hosttags settings.
  - Add log_error when strdup fails in {vg|lv}_change_tag().
  - Do not log backtrace in valid _lv_resume() code path.
  - Remove log directly if all mirror images of a mirrored log fail.
  - Randomly select which mdas to use or ignore.
  - Add printf format attributes to yes_no_prompt and fix a caller.
  - Remove superfluous suspended device counter from clvmd.
  - Fix lvm shell crash when input is entirely whitespace.
  - Update partial mode warning message.
  - Restore the removemissing behaviour of lvconvert --repair --use-policies.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.72-4
changelog:
  - Fix data corruption bug in cluster mirrors.
  - Require logical volume(s) to be explicitly named for lvconvert --merge.
  - Disallow 'mirrored' log type for cluster mirrors.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.72-5
changelog:
  - Fix clvmd init script to require proper dependencies.
  - Recognise and give preference to md device partitions (blkext major).
  - Split-mirror operations were ignoring user-specified PVs.
  - Never scan internal LVM devices.
  - Fix segfault in regex matcher with characters of ordinal value > 127.
  - Use built-in rule for device aliases: block/ < dm- < disk/ < mapper/ < other.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.72-8
changelog:
  - Fix potential for corruption during cluster mirror device failure.
  - Fix 'lvconvert --splitmirrors' in cluster operation.
  - Ignore snapshots when performing mirror recovery beneath an origin.
  - Add suspend_lv_origin and resume_lv_origin using LCK_ORIGIN_ONLY.
  - Allow internal suspend and resume of origin without its snapshots.
  - Fix dev_manager_transient to access -real device not snapshot-origin.
  - Monitor origin -real device below snapshot instead of overlay device.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.82-1
changelog:
  - Allow exclusive activation of snapshots in a cluster.
  - Add addnodeonresume and addnodeoncreate switch to dmsetup.
  - Add dm_tak_secure_data fn to libdevmapper to wipe all ioctl buffers in kernel.
  - Increase hash table size to 1024 LV names and 64 PV uuids.
  - Fix node and symlink operations in /dev for recent udev_sync optimalisation.
  - Remove unneeded checks for open_count in lv_info().
  - Synchronize with udev before checking open_count in lv_info().
  - Remove fs_unlock() from lv_resume path.
  - Allow CLVMD_CMD_SYNC_NAMES to be propagated around the cluster if requested.
  - Avoid rebuilding of uuid validation table.
  - Improve lvcreate "insufficient extents" errors to "insufficient free space".
  - Update to latest upstream release with various fixes
    and enhancements detailed in WHATS_NEW file.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.83-1
changelog:
  - Fix CRC32 calculation on big endian CPU (2.02.75).
  - Update to latest upstream release with various fixes
    and enhancements detailed in WHATS_NEW file.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.83-3
changelog:
  - Mitigate annoying error warning from device is usable check if run as non-root.
  - Fallback to control node creation only if node doesn't exist yet.
  - Avoid possible endless loop in _free_vginfo when 4 or more VGs have same name.
  - Fix to make resuming exclusive cluster mirror use local target type.
  - Lower secure data flag warning to verbose level if unsupported by kernel.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.86-1
changelog:
  - Fix read-only identical table reload supression.
  - Suppress low-level locking errors and warnings while using --sysinit.
  - Remove --force option from lvrename manpage.
  - Change DEFAULT_UDEV_SYNC to 1 so udev_sync is used even without any config.
  - Compare also file size to detect changed config file.
  - Update to latest upstream release with various fixes
    and enhancements detailed in WHATS_NEW file.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.87-1
changelog:
  - Update to latest upstream release with various fixes
    and enhancements detailed in WHATS_NEW file.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.87-2
changelog:
  - Terminate pv_attr field correctly (2.02.86).
  - Fix resource leak when strdup fails in _get_device_status() (2.02.85).
  - Fix unsafe table load when splitting off smaller mirror from a larger one.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.87-3
changelog:
  - Fix overly strict extent-count divisibility requirements for striped mirrors.
  - Fix rounding direction in lvresize when reducing volume size.
  - Fix possible overflow of size if %FREE or %VG is used.
  - Fix vgchange activation of snapshot with virtual origin.
  - Activate virtual snapshot origin exclusively (only on local node in cluster).
  - Fix lv_mirror_count to handle mirrored stripes properly.
  - Fix failure to down-convert a mirror to linear due to udev "dev open" conflict.
  - Fix mirrored log creation when PE size is small - force log_size >= region_size.
  - Fix log size calculation when only a log is being added to a mirror.
  - Work around resume_lv causing error LV scanning during splitmirror operation.
  - Begin using 64-bit status field flags.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.87-4
changelog:
  - Fix splitmirror in cluster having different DM/LVM views of storage.
  - Fix improper udev settings during suspend/resume for mirror sub-LVs.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.87-6
changelog:
  - Fix lv_info open_count test for disabled verify_udev_operations (2.02.86).
  - Log dev name now returned to kernel for registering during cmirror CTR.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-1
changelog:
  - Update to latest upstream release with initial support for thinly-provisioned
    devices and scalable snapshots, improved support for RAID personalities,
    initial support for LVM metadata caching daemon and various other fixes
    and enhancements detailed in WHATS_NEW file.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-2
changelog:
  - Fix a regression in handling of lvchange/lvcreate --major/--minor (2.02.95).
  - Fix name conflicts that prevent down-converting RAID1 when specifying a device.
  - Improve thin_check option passing and use configured path.
  - Add --with-thin-check configure option for path to thin_check.
  - Restart dmeventd on device-mapper-event package upgrade.
  - Do not run a new dmeventd instance on restart if there's no existing one.
  - Detect lvm binary path in lvmetad udev rules.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-3
changelog:
  - Restart clvmd daemon on lvm2-cluster package upgrade.
  - Keep exclusive activation in pvmove if LV is already active.
  - Disallow pvmove for exclusive LV if some affected LVs are not exclusively activated.
  - Remove unused and wrongly set cluster VG flag from clvmd lock query command.
  - Fix pvmove for exclusively activated LV pvmove in clustered VG (2.02.86).
  - Detect VG name being part of the LV name in lvconvert --splitmirrors -n.
  - Add 'vgscan --cache' functionality for consistency with 'pvscan --cache'.
  - Use 'pvscan --cache' instead of vgscan in lvmetad init script.
  - Exit immediately if LISTEN_PID env var incorrect during systemd handover.
  - Update and fix monitoring of thin pool devices.
  - Fix initializiation of thin monitoring (2.02.92).
  - Remove watch udev rule from 13-dm-disk.rules.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-4
changelog:
  - Fix lvresize of thin pool for striped devices.
  - Round upwards when specifying number of extents for lvresize.
  - Round downwards strip alignment for lvcreate with %FREE.
  - Fix problems when specifying PVs during RAID down-converts.
  - Fix ability to handle failures in mirrored log (2.02.89).
  - Change message severity to log_very_verbose for missing dev info in udev db.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-5
changelog:
  - Add lvmetad man page.
  - Fix RAID device replacement code so that it works under snapshot.
  - Fix inability to split RAID1 image while specifying a particular PV.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-6
changelog:
  - Allow subset of failed devices to be replaced in RAID LVs.
  - Prevent resume from creating error devices that already exist from suspend.
  - Fix lvconvert error message for non-mergeable volumes.
  - Fix volume group unlocking in vgreduce error path.
  - Update and correct lvs man page with supported column names.
  - Rename (Blk)DevNames/DevNos dmsetup header to (Blk)DevNamesUsed/DevNosUsed.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-7
changelog:
  - Disallow snapshots of mirror segment type.
  - Fix bug in cmirror that caused incorrect status info to print on some nodes.
  - Disallow changing cluster attribute of VG while RAID LVs are active.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-8
changelog:
  - Fix up-convert when mirror activation is controled by volume_list and tags.
  - Add a note for global/mirror_segtype_default setting that RAID1 is not cluster-aware.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-9
changelog:
  - Re-enable partial activation of non-thin LVs until it can be fixed (2.02.90).
  - Reinstate snapshots of mirror segment type.
    Warn of deadlock risk when using snapshots of mirror segment type.
  - Set delay_resume_if_new on deptree snapshot origin.
  - Add Conflicts: vdsm < 4.9-113.0 (new 'target' and 'zero' LV attr breaks vdsm).


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.97-1
changelog:
  - Use 'ignore' discards for thin metadata created with older versions.
  - Use proper condition to check for unsupported discards settings.
  - Update lvs manpage with discards (2.02.97).
  - Add support for lvcreate --discards.
  - Issue error message when arguments do not match specified RAID type.
  - Update to latest upstream release with various fixes
    and enhancements detailed in WHATS_NEW file.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-1
changelog:
  - Don't try to issue discards to a missing PV to avoid segfault.
  - Fix vgchange -aay not to activate non-matching LVs that follow a matching LV.
  - Fix lvchange --resync for RAID LVs which had no effect.
  - Add RAID10 support (--type raid10).
  - Introduce blkdeactivate script to deactivate block devs with dependencies.
  - Apply 'dmsetup mangle' for dm UUIDs besides dm names.
  - Use -q as short form of --quiet.
  - Suppress non-essential stdout with -qq.
  - Add log/silent to lvm.conf equivalent to -qq.
  - Add (p)artial attribute to lvs.
  - Implement devices/global_filter to hide devices from lvmetad.
  - Add lvmdump -l, to collect a state dump from lvmetad.
  - Add --discards to lvconvert.
  - Add --poolmetadata to lvconvert and support thin meta/data dev stacking.
  - Support creation of read-only thin volumes (lvcreate -p r).
  - Support changes of permissions for thin snapshot volumes.
  - Make lvremove ask before discarding data areas.
  - Prohibit not yet supported change of thin-pool to read-only.
  - Using autoextend percent 0 for thin pool fails 'lvextend --use-policies'.
  - Make vgscan --cache an alias for pvscan --cache.
  - Clear lvmetad metadata/PV cache before a rescan.
  - Fix a segmentation fault upon receiving a corrupt lvmetad response.
  - Give inconsistent metadata warnings in pvscan --cache.
  - Avoid overlapping locks that could cause a deadlock in lvmetad.
  - Fix memory leaks in libdaemon and lvmetad.
  - Optimize libdaemon logging for a fast no-output path.
  - Only create lvmetad pidfile when running as a daemon (no -f).
  - Warn if lvmetad is running but disabled.
  - Warn about running lvmetad with use_lvmetad = 0 in example.conf.
  - Update lvmetad help output (flags and their meaning).
  - Make pvscan --cache read metadata from LVM1 PVs.
  - Make libdaemon buffer handling asymptotically more efficient.
  - Make --sysinit suppress lvmetad connection failure warnings.
  - Prohibit usage of lvcreate --thinpool with --mirrors.
  - Fix lvm2api origin reporting for thin snapshot volume.
  - Add implementation of lvm2api function lvm_percent_to_float.
  - Allow non power of 2 thin chunk sizes if thin pool driver supports that.
  - Allow limited metadata changes when PVs are missing via [vg|lv]change.
  - Do not start dmeventd for lvchange --resync when monitoring is off.
  - Remove pvscan --cache from lvm2-lvmetad init script.
  - Report invalid percentage for property snap_percent of non-snaphot LVs.
  - Disallow conversion of thin LVs to mirrors.
  - Fix lvm2api data_percent reporting for thin volumes.
  - Do not allow RAID LVs in a clustered volume group.
  - Enhance insert_layer_for_lv() with recursive rename for _tdata LVs.
  - Skip building dm tree for thin pool when called with origin_only flag.
  - Ensure descriptors 0,1,2 are always available, using /dev/null if necessary.
  - Use /proc/self/fd when available for closing opened descriptors efficiently.
  - Fix inability to create, extend or convert to a large (> 1TiB) RAID LV.
  - Update lvmetad communications to cope with clients using different filters.
  - Clear LV_NOSYNCED flag when a RAID1 LV is converted to a linear LV.
  - Disallow RAID1 upconvert if the LV was created with --nosync.
  - Disallow addition of RAID images until the array is in-sync.
  - Fix RAID LV creation with '--test' so valid commands do not fail.
  - Add lvm_lv_rename() to lvm2api.
  - Fix setvbuf code by closing and reopening stream before changing buffer.
  - Disable private buffering when using liblvm.
  - When private stdin/stdout buffering is not used always use silent mode.
  - Fix 32-bit device size arithmetic needing 64-bit casting throughout tree.
  - Fix dereference of NULL in lvmetad error path logging.
  - Fix buffer memory leak in lvmetad logging.
  - Change lvmetad logging syntax from -ddd to -l {all|wire|debug}.
  - Add new libdaemon logging infrastructure.
  - Support unmount of thin volumes from pool above thin pool threshold.
  - Update man page to reflect that dm UUIDs are being mangled as well.
  - Add 'mangled_uuid' and 'unmangled_uuid' fields to dmsetup info -c -o.
  - Mangle device UUID on dm_task_set_uuid/newuuid call if necessary.
  - Add dm_task_get_uuid_mangled/unmangled to libdevmapper.
  - Always reset delay_resume_if_new flag when stacking thin pool over anything.
  - Don't create value for dm_config_node and require dm_config_create_value call.
  - Check for existing new_name for dmsetup rename.
  - Fix memory leak in dmsetup _get_split_name() error path.
  - Add Requires: bash >= 4.0 for blkdeactivate script.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-3
changelog:
  - Init lvmetad lazily to avoid early socket access on config overrides.
  - Hardcode use_lvmetad=0 if cluster locking used and issue a warning msg.
  - Avoid reading mirrors with failed devices in its mirrored log.
  - Avoid reading from mirrors that have failed devices if they block I/O.
  - Change lvs heading Copy% to Cpy%Sync and print RAID4/5/6 sync% there too.
  - Fix dm_task_set_cookie to properly process udev flags if udev_sync disabled.
  - Add Requires: device-mapper-persistent-data for thin provisioning support.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-4
changelog:
  - Add DM_DISABLE_UDEV environment variable to manage dev nodes by libdm only.
  - Recognize DM_DISABLE_UDEV environment variable for a complete fallback.
  - Do not verify udev operations if --noudevsync command option is used.
  - Automatically deactivate failed preloaded dm tree node.
  - Fix lvm2app to return all property sizes in bytes.
  - Add lvm.conf option global/thin_disabled_features.
  - Add lvconvert support to swap thin pool metadata volume.
  - Implement internal function detach_pool_metadata_lv().
  - Fix lvm2app and return lvseg discards property as string.
  - Allow forced vgcfgrestore of lvm2 metadata with thin volumes.
  - Add lvm.conf thin pool defs thin_pool_{chunk_size|discards|zero}.
  - Support discards for non-power-of-2 thin pool chunks.
  - Support allocation of pool metadata with lvconvert command.
  - Move common functionality for thin lvcreate and lvconvert to toollib.
  - Use lv_is_active() instead of lv_info() call.
  - Disallow pvmove on RAID LVs until they are addressed properly
  - Automatically restore MISSING PVs with no MDAs.
  - Do not allow --splitmirrors on RAID10 logical volumes.
  - When no '-i' argument is given for RAID10, default to 2 stripes.
  - Mirrored log is now fixed before its mirror when double-fault occurs.
  - Exit pvscan --cache immediately if cluster locking used or lvmetad not used.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-5
changelog:
  - Avoid a global lock in pvs when lvmetad is in use.
  - Fix crash in pvscan --cache -aay triggered by non-mda PV.
  - Fix memleak in device_is_usable mirror testing function.
  - Do not ignore -f in lvconvert --repair -y -f for mirror and raid volumes.
  - Fix regression that caused inability to create a snapshot of an inactive LV.
  - Remove warning about unsupported discards for non-power-of-2 thin pool chunks.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-6
changelog:
  - Limit RAID device replacement to repair only if LV is not in-sync.
  - Disallow RAID device replacement or repair on inactive LVs.
  - Fix possible race while removing metadata from lvmetad.
  - Fix possible deadlock when querying and updating lvmetad at the same time.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-7
changelog:
  - Synchronize with udev in pvscan --cache and fix dangling udev_sync cookies.
  - Fix autoactivation to not autoactivate VG/LV on each change of the PVs used.
  - Fix lvmetad updates for lvm1 format and fix reported internal errors.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.100-1
changelog:
  -  o Features/Extensions/Additions:
  - Add DM_ABORT_ON_INTERNAL_ERRORS env var support to abort on internal errors.
  - Verify clvmd message validity before processing and log error if incorrect.
  - Add initial support thin pool lvconvert --repair.
  - Add support for poolmetadataspare LV, that will be used for pool recovery.
  - Improve activation order when creating thin pools in non-clustered VG.
  - Add lvm2-activation-net systemd unit to activate LVs on net-attached storage.
  - Automatically flag thin snapshots to be skipped during activation.
  - Add support for persistent flagging of LVs to be skipped during activation.
  - Make selected thinp settings customizable by a profile.
  - Support storing profile name in metadata for both VGs and LVs.
  - Add support for configuration profiles.
  - Add support for thin volumes in vgsplit.
  - Require 1.9 thin pool target version for online thin pool metadata resize.
  - Add lvresize support for online thin pool metadata volume resize.
  - Add detection for thin pool metadata resize kernel support.
  - Add vg->vg_ondisk / lv_ondisk() holding committed metadata.
  - Add detection of mounted fs also for vgchange deactivation.
  - Avoid a global lock in pvs when lvmetad is in use.
  - Detect maximum usable size for snapshot for lvresize.
  - Improve RAID kernel status retrieval to include sync_action/mismatch_cnt.
  - Add external origin support for lvcreate.
  - Support automatic config validation.
  - Add PV header extension: extension version, flags and bootloader areas.
  - Initial support for lvconvert of thin external origin.
  - Improve activation code for better support of stacked devices.
  - vgimport '--force' now allows import of VGs with missing PVs.
  - Allow removal or replacement of RAID LV components that are error segments.
  - Make 'vgreduce --removemissing' able to handle RAID LVs with missing PVs.
  - Add lvconvert support to swap thin pool metadata volume.
  - Allow vgcfgrestore of lvm2 metadata with thin volumes if --force is used.
  - Give precedence to EMC power2 devices with duplicate PVIDs.
  - Recognise Storage Class Memory (IBM S/390) devices in filter.
  - Recognise STEC skd devices in filter.
  - Recognise Violin Memory vtms devices in filter.
  - Support discards for non-power-of-2 thin pool chunks.
  - Automatically restore MISSING PVs with no MDAs.
  - Support allocation of pool metadata with lvconvert command.
  - Detect mounted fs also via reading /proc/self/mountinfo.
  -  o Command Interface/Options:
  - Support ARG_GROUPABLE with merge_synonym (for --raidwritemostly).
  - Add --ignoreactivationskip to lvcreate/vgchange/lvchange to ignore skip flag.
  - Add --setactivationskip to lvcreate/lvchange to set activation skip flag.
  - Add --type profilable to lvm dumpconfig to show profilable config settings.
  - Add --mergedconfig to lvm dumpconfig for merged --config/--profile/lvm.conf.
  - Support changing VG/LV profiles: vgchange/lvchange --profile/--detachprofile.
  - Add new --profile command line arg to select a configuration profile for use.
  - For creation of snapshot require size for at least 3 chunks.
  - Do not accept size parameters bigger then 16EiB.
  - Accept --yes in all commands so test scripts can be simpler.
  - Add lvcreate/lvchange --[raid]{min|max}recoveryrate for raid LVs.
  - Add lvchange --[raid]writemostly/writebehind support for RAID1
  - Add lvchange --[raid]syncaction for scrubbing of RAID LVs.
  - Add --validate option to lvm dumpconfig to validate current config on demand.
  - Add --ignoreadvanced and --ignoreunsupported switch to lvm dumpconfig.
  - Add --withcomments and --withversions switch to lvm dumpconfig.
  - Add --type {current|default|missing|new} and --atversion to lvm dumpconfig.
  - Add --bootloaderareasize to pvcreate and vgconvert to create bootloader area.
  - Do not take a free lv name argument for lvconvert --thinpool option.
  - Allow lvconvert --stripes/stripesize only with --mirrors/--repair/--thinpool.
  - Do not ignore -f in lvconvert --repair -y -f for mirror and raid volumes.
  - Support use of option --yes for lvchange --persistent.
  - Fix clvmd support for option -d and properly use its argument.
  -  o Reporting:
  - Issue an error msg if lvconvert --type used incorrectly with other options.
  - Use LOG_DEBUG/ERR msg severity instead default for lvm2-activation-generator.
  - Add LV report fields: raid_mismatch_count/raid_sync_action/raid_write_behind.
  - Add LV reporting fields raid_min_recovery_rate, raid_max_recovery_rate.
  - Add sync_percent as alias for copy_percent LV reporting field.
  - Add lv_ prefix to modules reporting field.
  - Use units B or b (never E) with no decimal places when displaying sizes < 1k.
  - List thin-pool and thin modules for thin volumes.
  - Add 's(k)ip activation' bit to lvs -o lv_attr to indicate skip flag attached.
  - Improve error loging when user tries to interrupt commands.
  - Add vgs/lvs -o vg_profile/lv_profile to report profiles attached to VG/LV.
  - Report lvs volume type 'e' with higher priority.
  - Report lvs volume type 'o' also for external origin volumes.
  - Report lvs target type 't' only for thin pools and thin volumes.
  - Add "active" LV reporting field to show activation state.
  - Add "monitor" segment reporting field to show dmevent monitoring status.
  - Add explicit message about unsupported pvmove for thin/thinpool volumes.
  - Add pvs -o pv_ba_start,pv_ba_size to report bootloader area start and size.
  - Fix pvs -o pv_free reporting for PVs with zero PE count.
  - Report blank origin_size field if the LV doesn't have an origin instead of 0.
  - Report partial and in-sync RAID attribute based on kernel status
  - Log output also to syslog when abort_on_internal_error is set.
  - Change lvs heading Copy% to Cpy%Sync and print RAID4/5/6 sync% there too.
  - Report error for nonexisting devices in dmeventd communication.
  - Reduce some log_error messages to log_warn where we don't fail.
  -  o Configuration:
  - Add lvm.conf thin_repair/dump_executable and thin_repair_options.
  - Add activation/auto_set_activation_skip to control activation skip flagging.
  - Add default.profile configuration profile and install it on make install.
  - Add config/profile_dir to set working directory to load profiles from.
  - Use mirror_segtype_default if type not specified for linear->mirror upconvert.
  - Refine lvm.conf and man page documentation for autoactivation feature.
  - Override system's global_filter settings for vgimportclone.
  - Find newest timestamp of merged config files.
  - Add 'config' section to lvm.conf to set the way the LVM configuration is handled.
  - Add global/raid10_segtype_default to lvm.conf.
  - Accept activation/raid_region_size in preference to mirror_region_size config.
  - Add log/debug_classes to lvm.conf to control debug log messages.
  - Allow empty activation/{auto_activation|read_only|}_volume_list config option.
  - Add lvm.conf option global/thin_disabled_features.
  - Add lvm.conf thin pool allocation settings thin_pool_{chunk_size|discards|zero}.
  - Relax ignore_suspended_devices to read from mirrors that don't have a device marked failed.
  -  o Documentation:
  - Add man page entries for profile configuration and related options.
  - Document lvextend --use-policies option in man.
  - Improve lvcreate, lvconvert and lvm man pages.
  -  o API/interfaces:
  - liblvm/python API: Additions: PV create/removal/resize/listing
  - liblvm/python API: Additions: LV attr/origin/Thin pool/Thin LV creation
  - Fix exported symbols regex for non-GNU busybox sed.
  - Add LV snapshot support to liblvm and python-lvm.
  - Fix lvm2app to return all property sizes in bytes (not sectors).
  - Fix lvm2app and return lvseg discards property as string.
  - Remove python liblvm object. systemdir can only be changed using env var now.
  - Add DM_DISABLE_UDEV environment variable to manage dev nodes by libdm only.
  - Add dm_get_status_snapshot() for parsing snapshot status.
  - Append discards and read-only fields to exported struct dm_status_thin_pool.
  - Validate passed params to dm_get_status_raid/thin/thin_pool().
  - Fix dm_task_set_cookie to properly process udev flags if udev_sync disabled.
  - Add dm_mountinfo_read() for parsing /proc/self/mountinfo.
  - Add dm_config_write_{node_out/one_node_out} for enhanced config output.
  - Add dm_config_value_is_bool to check for boolean value in supported formats.
  - Add DM_ARRAY_SIZE public macro.
  - Add DM_TO_STRING public macro.
  - Implement ref-counting for parents in python lib.
  -  o Fixes (general):
  - Create dmeventd timeout threads as "detached" so exit status is freed.
  - Fix inability to remove a VG's cluster flag if it contains a mirror.
  - Suppress arg: prefix in log_sys_error macro when arg is empty string.
  - Fix bug making lvchange unable to change recovery rate for RAID.
  - Prohibit conversion of thin pool to external origin.
  - When creating PV on existing LV don't forbid reserved LV names on LVs below.
  - When converting mirrors, default segtype should be the same unless specified.
  - Add pipe_open/close() to use instead of less efficient/secure popen().
  - Ignore previous LV seg with alloc contiguous & cling when num stripes varies.
  - Do not zero init 4KB of thin snapshot for non-zeroing thin pool (2.02.94).
  - Correct thin creation error paths.
  - Add whole log_lv and metadata_lv sub volumes when creating partial tree.
  - Properly use snapshot layer for origin which is also thin volume.
  - Avoid generating metadata backup when calling update_pool_lv().
  - Send thin messages also for active thin pool and inactive thin volume.
  - Avoid creation of multiple archives for one command.
  - Avoid flushing thin pool when just requesting transaction_id.
  - Fix use of too big chunks of memory when communication with lvmetad.
  - Also filter partitions on mpath components if multipath_component_detection=1.
  - Do not use persistent filter with lvmetad.
  - Move syslog code out of signal handle in dmeventd.
  - Fix lvresize --use-policies of VALID but 100% full snapshot.
  - Skip monitoring of snapshots that are already bigger then origin.
  - Refuse to init a snapshot merge in lvconvert if there's no kernel support.
  - Fix alignment of PV data area if detected alignment less than 1 MB (2.02.74).
  - Fix premature DM version checking which caused useless mapper/control access.
  - Fix creation and removal of clustered snapshot.
  - Fix clvmd caching of metadata when suspending inactive volumes.
  - Fix lvmetad error path in lvmetad_vg_lookup() for null vgname.
  - Fix clvmd _cluster_request() return code in memory fail path.
  - Fix vgextend to not allow a PV with 0 MDAs to be used while already in a VG.
  - Fix PV alignment to incorporate alignment offset if the PV has zero MDAs.
  - Fix missing cleanup of flags when the LV is detached from pool.
  - Fix check for some forbidden discards conversion of thin pools.
  - Fix blkdeactivate to handle nested mountpoints and mangled mount paths.
  - Synchronize with udev in pvscan --cache and fix dangling udev_sync cookies.
  - Fix autoactivation to not autoactivate VG/LV on each change of the PVs used.
  - Limit RAID device replacement to repair only if LV is not in-sync.
  - Disallow RAID device replacement or repair on inactive LVs.
  - Unlock vg mutex in error path when lvmetad tries to lock_vg.
  - Detect key string duplication failure in config_make_nodes_v in libdaemon.
  - Disallow pvmove on RAID LVs until they are addressed properly
  - Recognize DM_DISABLE_UDEV environment variable for a complete fallback.
  - Do not verify udev operations if --noudevsync command option is used.
  - When no --stripes argument is given when creating a RAID10 volume, default to 2 stripes.
  - Do not allow lvconvert --splitmirrors on RAID10 logical volumes.
  - Skip mlocking [vectors] on arm architecture.
  - Repair a mirrored log before the mirror itself when both fail.
  - Don't use lvmetad in lvm2-monitor.service ExecStop to avoid a systemd issue.
  - Exit pvscan --cache immediately if cluster locking used or lvmetad not used.
  - Hardcode use_lvmetad=0 if cluster locking used and issue a warning msg.
  - Avoid trying to read a mirror that has a failed device in its mirrored log.
  - Fix 'dmsetup splitname -o' to not fail if used without '-c' switch (1.02.68).
  - Fix segfault for truncated string token in config file after the first '"'.
  - Fix config node lookup inside empty sections to not return the section itself.
  - Fix parsing of 64bit snapshot status in dmeventd snapshot plugin.
  - Always return success on dmeventd -V command call.
  -  o Fixes (segfaults/crashes/deadlocks/races):
  - Fix metadata area offset/size overflow if it's >= 4g and while using lvmetad.
  - Fix segfault if devices/global_filter is not specified correctly.
  - Fix segfault when reporting raid_syncaction for older kernels.
  - Fix vgcfgrestore crash when specified incorrect vg name.
  - Avoid crash-inducing race in lvmetad when VG disappears during rename.
  - Fix possible race while removing metadata from lvmetad.
  - Fix possible deadlock when querying and updating lvmetad at the same time.
  - Check for memory failure of dm_config_write_node() in lvmetad.
  - Fix crash in pvscan --cache -aay triggered by non-mda PV.
  - Prevent double free error after dmeventd call of _fill_device_data().
  -  o Fixes (resource leaks/memleaks):
  - Fix clogd descriptor leak when daemonizing.
  - Fix clvmd descriptor leak on restart.
  - Release memory allocated with _cached_info().
  - Release memory and unblock signals in lock_vol error path.
  - Fix memory resource leak in memlocking error path.
  - Fix memleak in dmeventd thin plugin in device list obtaining err path.
  - Fix socket leak on error path in lvmetad's handle_connect.
  - Fix memleak on error path for lvmetad's pv_found.
  - Fix memleak in device_is_usable mirror testing function.
  - Fix memory leak on error path for pvcreate with invalid uuid.
  - Fix resource leak in error path of dmeventd's umount of thin volume.
  - Close open dmeventd FIFO file descriptors on exec (FD_CLOEXEC).
  -  o Testing:
  - Fix test for active snapshot in cluster before resizing it.
  - Add python-lvm unit test case
  -  o Other:
  - Require confirmation for vgchange -c when no VGs listed explicitly.
  - Also skip /var and /var/log by default in blkdeactivate when unmounting.
  - Add support for bind mounts in blkdeactivate.
  - Add blkdeactivate -v/--verbose for debug output from external tools used.
  - Add blkdeactivate -e/--errors for error messages from external tools used.
  - Suppress messages from external tools called in blkdeactivate by default.
  - Workaround gcc v4.8 -O2 bug causing failures if config/checks=1 (32bit arch).
  - Add --with-thin-repair and --with-thin-dump configure options.
  - Use local activation for clearing snapshot COW device.
  - Add configure --with-default-profile-subdir to select dir to keep profiles in.
  - Creation of snapshot takes at most 100% origin coverage.
  - Use LC_ALL to set locale in daemons and fsadm instead of lower priority LANG.
  - Remove dependency on fedora-storage-init.service in lvm2 systemd units.
  - Depend on lvm2-lvmetad.socket in lvm2-monitor.service systemd unit.
  - Optimize out setting the same value of read_ahead.
  - Automatically deactivate failed preloaded dm tree node.
  - Process thin messages once to active thin pool target for dm_tree.
  - Move common functionality for thin lvcreate and lvconvert to toollib.
  -  o Packaging:
  - Do not include /lib/udev and /lib/udev/rules.d in device-mapper package.
  - Change Source0 link to ftp://sources.redhat.com/pub/lvm2/releases/LVM2.<version>.tgz
  - Fix some incorrect changelog dates.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.100-2
changelog:
  - Refresh existing VG before autoactivating (event retrigger/device reappeared).
  - Move mpath device filter before partitioned filter (which opens devices).
  - Fix vgck to notice on-disk corruption even if lvmetad is used.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.100-3
changelog:
  - Do not allow passing empty new name for dmsetup rename.
  - Check for exactly one lv segment in validation of thin pools and volumes.
  - Fix dmeventd unmonitoring of thin pools.
  - Fix lvresize for stacked thin pool volumes (i.e. mirrors).
  - Support most of lvchange operations on stacked thin pool meta/data LVs.
  - Disable pvmove of merging or converting logical volumes.
  - Enable pvmove of snapshots and snapshot origins.
  - Fix inability to specify LV name when pvmove'ing a RAID, mirror, or thin-LV.
  - Add ability to pvmove RAID, mirror, and thin volumes.
  - Avoid unlimited recursion when creating dtree containing inactive pvmove LV.
  - Add man page entries for lvmdump's -u and -l options.
  - Remove "mpath major is not dm major" msg for mpath component scan (2.02.94).
  - Don't assume stdin file descriptor is readable.
  - Write Completed debug message before reinstating log defaults after command.
  - Use pvscan -b in udev rules to avoid a deadlock on udev process count limit.
  - Add pvscan -b/--background for the command to be processed in the background.
  - Direct udev to use 3min timeout for LVM devices. Recent udev has default 30s.
  - Do not scan multipath or RAID components and avoid incorrect autoactivation.
  - Fix MD/loop udev handling to fire autoactivation after setup or coldplug only.
  - Fix ignored lvmetad update on loop device configuration (2.02.99)
  - Fix lvm2app segfault while using lvm_list_pvs_free fn if there are no PVs.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.100-4
changelog:
  - Fix RAID calculation for sufficient allocatable space.
  - Conversion from linear to mirror or RAID1 now honors mirror_segtype_default.
  - Fix contiguous & cling allocation policies for parity RAID. (2.02.100)
  - lvconvert no longer converts LVs of "mirror" segment type to thinpool.
  - lvconvert no longer converts thinpool sub-LVs to "mirror" segment type.
  - Make RAID capable of single-machine exclusive operations in a cluster.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.100-5
changelog:
  - Fix failing metadata repair when lvmetad is used.
  - Fix incorrect memory handling when reading messages from lvmetad.
  - Fix locking in lvmetad when handling the PV which is gone.
  - Fix lvconvert when converting to a thin pool and thin LV at once.
  - Recognize new flag to skip udev scanning in udev rules and act appropriately.
  - Add support for flagging an LV to skip udev scanning during activation.
  - Improve message when unable to change discards setting on active thin pool.
  - Add --ignoreskippedcluster for exit status success when clustered VGs skipped.
  - Define symbolic names for subsystem udev flags in libdevmapper for easier use.
  - Make subsystem udev rules responsible for importing DM_SUBSYSTEM_UDEV_FLAG*.
  - Remove extra GOTO jump in lvmetad udev rules causing incorrect lvmetad update.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.100-6
changelog:
  - Fix lvconvert swap of poolmetadata volume for active thin pool
  - Check for open count with a timeout before removal/deactivation of an LV.
  - Add workaround for deactivation problem of opened virtual snapshot.
  - Report RAID images split with tracking as out-of-sync ("I").
  - Recognise NVM Express devices in filter.
  - Fix possible race while creating/destroying memory pools.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.100-7
changelog:
  - Add ignore_lvm_mirrors to config file to read/ignore labels on mirrors.
  - Revert to using devices/obtain_device_list_from_udev=0 by default.
  - Add internal flag for temporary LVs to properly direct udev to not interfere.
  - Fix endless loop in blkdeactivate <device>... if unable to umount/deactivate.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.107-2
changelog:
  - Add report/list_item_separator lvm.conf option.
  - Add lv_active_{locally,remotely,exclusively} LV reporting fields.
  - Comment out devices/{preferred_names,filter} in default lvm.conf file.
  - Enhance lvconvert thin, thinpool, cache and cachepool command line support.
  - Display 'C' only for cache and cache-pool target types in lvs.
  - Prompt for confirmation before change LV into a snapshot exception store.
  - Return proper error codes for some failing lvconvert funtions.
  - Add initial code to use cache tools (cache_check|dump|repair|restore).
  - Add --activationmode degraded to activate degraded raid volumes by default.
  - Add separate lv_active_{locally,remotely,exclusively} LV reporting fields.
  - Recognize "auto"/"unmanaged" values in selection for appropriate fields only.
  - Add report/binary_values_as_numeric lvm.conf option for binary values as 0/1.
  - Add --binary arg to pvs,vgs,lvs and {pv,vg,lv}display -C for 0/1 on reports.
  - Add separate reporting fields for each each {pv,vg,lv}_attr bit.
  - Separate LV device status reporting fields out of LV fields.
  - Fix regression causing PVs not in VGs to be marked as allocatable (2.02.59).
  - Fix VG component of lvid in vgsplit/vgmerge and check in vg_validate.
  - Add lv_full_name, lv_parent and lv_dm_path fields to reports.
  - Change lv_path field to suppress devices that never appear in /dev/vg.
  - Postpone thin pool lvconvert prompts (2.02.107).
  - Require --yes option to skip prompt to lvconvert thin pool chunksize.
  - Support lvremove -ff to remove thin volumes from broken thin pools.
  - Require --yes to skip raid repair prompt.
  - Change makefile %.d generation to handle filename changes without make clean.
  - Fix use of buildir in make pofile.
  - Enhance private volumes UUIDs with suffixed for easier detection.
  - Do not use reserved _[tc]meta volumes for temporary LVs.
  - Leave backup pool metadata with _meta%d suffix instead of reserved _tmeta%d.
  - Allow RAID repair to reuse PVs from same image that suffered a failure.
  - New RAID images now avoid allocation on any PVs in the same parent RAID LV.
  - Always reevaluate filters just before creating PV.
  - Fix dm_report_field_string_list to handle delimiter with multiple chars.
  - Add dm_report_field_reserved_value for per-field reserved value definition.


author: Alasdair Kergon <agk@redhat.com> - 2.02.108-1
changelog:
  - Add lvscan --cache which re-scans constituents of a particular LV.
  - Make dmeventd's RAID plugin re-scan failed PVs when lvmetad is in use.
  - Improve lvconvert --merge and --splitsnapshot validation.


author: Alasdair Kergon <agk@redhat.com> - 2.02.109-1
changelog:
  - Allow approximate allocation with +%FREE in lvextend.
  - Fix a segfault in lvscan --cache when devices were already missing. (2.02.108)
  - Display actual size changed when resizing LV.
  - Remove possible spurious "not found" message on PV create before wiping.
  - Handle upgrade from 2.02.105 when an LV now gaining a uuid suffix is active.
  - Remove lv_volume_type field from reports. (2.02.108)
  - Fix incorrect persistent .cache after vgcreate with PV creation. (2.02.108)
  - Add dm_tree_set_optional_uuid_suffixes to libdevmapper to handle upgrades.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.109-2
changelog:
  - Fix pvcreate_check() to update cache correctly after signature wiping.
  - Fix primary device lookup failure for partition when processing mpath filter.
  - Remove spurious "Skipping mirror LV" message on pvmove of clustered mirror.
  - If LV inactive and non-clustered, do not issue "Cannot deactivate" on -aln.
  - Cleanly error when creating RAID with stripe size < PAGE_SIZE.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.110-1
changelog:
  - Fix manipulation with thin-pools which are excluded via volume_list.
  - Support lv/vgremove -ff to remove thin vols from broken/inactive thin pools.
  - Fix typo breaking configure --with-lvm1=shared.
  - Modify lvresize code to handle raid/mirrors and physical extents.
  - Don't allow pvcreate to proceed if scanning or filtering fails.
  - Print name of LV which on activation triggers delayed snapshot merge.
  - Add lv_layout and lv_role LV reporting fields.
  - Properly display lvs lv_attr volume type and target type bit for cache origin.
  - Improve libdevmapper-event select() error handling.
  - Add extra check for matching transation_id after message submitting.
  - Add dm_report_field_string_list_unsorted for str. list report without sorting.
  - Support --deferred with dmsetup remove to defer removal of open devices.
  - Update dm-ioctl.h to include DM_DEFERRED_REMOVE flag.
  - Add support for selection to match string list subset, recognize { } operator.
  - Fix string list selection with '[value]' to not match list that's superset.
  - Fix string list selection to match whole words only, not prefixes.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.111-1
changelog:
  - Reinstate nosync logic when extending mirror. (2.02.110)
  - Fix total area extent calculation when allocating cache pool. (2.02.110)
  - Pass properly sized char buffers for sscanf when initializing clvmd.
  - Restore proper buffer size for parsing mountinfo line (1.02.89)


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.117-1
changelog:
  - Update to latest upstream release with various fixes and
    enhancementsdetailed in WHATS_NEW and WHATS_NEW_DM file.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.118-1
changelog:
  - Fix LV processing with selection to always do the selection on initial state.
  - Store metadata size + checksum in lvmcache and add struct lvmcache_vgsummary.
  - Remove inaccessible clustered PVs from 'pvs -a'.
  - Don't invalidate cached orphan information while global lock is held.
  - Avoid rescan of all devices when requested pvscan for removed device.
  - Measure configuration timestamps with nanoseconds when available.
  - Disable lvchange of major and minor of pool LVs.
  - Fix pvscan --cache to not scan and read ignored metadata areas on PVs.
  - Disallow vgconvert from changing metadata format when lvmetad is used.
  - Don't do a full read of VG when creating a new VG with an existing name.
  - Reduce amount of VG metadata parsing when looking for vgname on a PV.
  - Avoid reparsing same metadata when reading same metadata from multiple PVs.
  - Save extra device open/close when scanning device for size.
  - Fix seg_monitor field to report status also for mirrors and thick snapshots.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.118-2
changelog:
  - Don't skip invalidation of cached orphans if vg write lck is held (2.02.118).
  - Add --enable-halvm and --disable-halvm options to lvmconf script.
  - Add --services, --mirrorservice and --startstopservices option to lvmconf.
  - Use proper default value of global/use_lvmetad when processing lvmconf script.
  - Set correct vgid when updating cache when writing PV metadata.
  - Don't silently accept lvcreate -m with raid4/5/6.
  - Add A_PARTITION_BY_TAGS set when allocated areas should not share tags.
  - Respect allocation/cling_tag_list during intial contiguous allocation.
  - Don't skip invalidation of cached orphans if vg write lck is held (2.02.118).
  - Log relevant PV tags when using cling allocation.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.118-3.el6_7.2
changelog:
  - Fix alloc segfault when extending LV with fewer stripes than in first seg.
  - Fix regression in cache causing some PVs to bypass filters (2.02.105).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - tkmib doco had #!/usr/bin/perl55
  - include snmpcheck and tkmib again (still needs some CPAN module, however).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - don't depend on /etc/init.d so that package will work with 6.2.
  - perl path fiddles no longer needed.
  - rely on brp-compress frpm rpm to compress man pages.
  - patch from ucd-snmp CVS (Wes Hardaker).
  - configure.in needs to check for rpm libraries correctly (#23033).
  - add simple logrotate script (#21399).
  - add options to create pidfile and log with syslog with addresses (#23476).


author: Matt Wilson <msw@redhat.com>
changelog:
  - configure with --enable-reentrant and added "smux" and "agentx" to
    --with-mib-modules= argument (#29626)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Updated to 4.2.1. Removed 2 obsolete patches (fromcvs and #18153)
  - Include /usr/share/snmp/snmpconf in %files


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Enabled IPv6 support (RFE #47764)
  - Hopefully final fix of snmpwalk problem (#42153). Thanks to Douglas Warzecha
    for the patch and Matt Domsch for reporting the problem.


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Removed tkmib from the package once again as we don't ship the Tk.pm CPAN
    perl module required to run it (#49363)
  - Added missing Provides for the .so.0 libraries as rpm doesn't seem to find
    those during the build anymore (it used to) (#46388)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed a couple of security issues:
    o /tmp race and setgroups() privilege problem
    o Various buffer overflow and format string issues.
    o One signedness problem in ASN handling.
  - Fixed an important RFE to support bcm5820 cards. (#51125)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Final bcm5820 fix. Last one was broken.
  - Fixed bugzilla bug (#51960) where the binaries contained rpath references.


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed a server segfault for snmpset operation (#53640). Thanks to Josh Giles
    and Wes Hardaker for the patch.


author: Phil Knirsch <phil@redhat.de> 4.2.3-1
changelog:
  - Update to 4.2.3 final.
  - Fixed libtool/rpath buildroot pollution problem.
  - Fixed library naming problem.


author: Phil Knirsch <pknirsch@redhat.com> 4.2.3-4
changelog:
  - Added the snmptrapd init script as per request (#49205)
  - Fixed the again broken rpm query stuff (#57444)
  - Removed all old and none-used db related stuff (libs and header checks/files)


author: Phil Knirsch <pknirsch@redhat.com> 5.0.1-5
changelog:
  - Added --enable-ucd-snmp-compatibility for compatibility with older version
    and fixed installation thereof.
  - Got rid of the perl(Tk) dependancy by removing snmpcheck.
  - Include /usr/include/ucd-snmp in the filelist.
  - Fixed a problem with the ucd-snmp/version.h file.


author: Phil Knirsch <pknirsch@redhat.com> 5.0.8-2
changelog:
  - Hack to make it build on 64bit platforms with /usr/lib64 correctly.
  - Fixed bug #85071 (leak of open descriptors for ipv6).


author: Phil Knirsch <pknirsch@redhat.com> 5.0.9-1
changelog:
  - Updated to latest upstream version net-snmp-5.0.9
  - Added patch to fix net-snmp-perl problems (#105842).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-1
changelog:
  - Updated to latest net-snmp-5.1 upstream version.
  - Tons of specfile and patch cleanup.
  - Cleaned up perl stuff (mib2c etc, see #107707).
  - Added lm_sensors support patch for x86 archs from Kaj J. Niemi (#107618).
  - Added support for custom mib paths and mibs to snmptrapd initscript (#102762)


author: Phil Knirsch <pknirsch@redhat.com> 5.1-2
changelog:
  - Included BuildPrereq on lm_sensors-devel on x86 archs (#110616).
  - Fixed deprecated initscript options (#110618).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-3
changelog:
  - Removed snmpcheck again, needs perl(Tk) which we don't ship (#111194).
  - Fixed getopt definition in include file (#111209).
  - Included Kaj J. Niemi's patch for broken perl module (#111319).
  - Included Kaj J. Niemi's patch for broken async getnext perl call (#111479).
  - Included Kaj J. Niemi's patch for broken hr_storage (#111502).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-9
changelog:
  - Reverted removal of _includir redefiniton due to php-snmp dependancy.
  - Remove SO_BSDCOMPAT setsockopt() call, deprecated.


author: Phil Knirsch <pknirsch@redhat.com> 5.1-12
changelog:
  - Hacked an ugly perl hack to get rid of perl RPATH problems.
  - Fixed 64bit patch and applied it. ;-)


author: Phil Knirsch <pknirsch@redhat.com> 5.1.1-2
changelog:
  - Added Kaj J. Niemi that fixes ipAdEntIfIndex problem (#119106)
  - Added Kaj J. Niemi to shut up memshared message for 2.6 kernel (#119203)


author: Radek Vokal <rvokal@redhat.com> 5.1.2-4
changelog:
  - New prereq for net-snmp-devel
  - lelf check removed from configure.in (#128748)
  - fixed snmpd coredump when sent SIGHUP (#127314)


author: Phil Knirsch <pknirsch@redhat.com> 5.1.2-9
changelog:
  - Droped obsolete lm-sensors patch and enabled lmSensors module
  - Marked several patches to be removed for 5.1.3


author: Radek Vokal <rvokal@redhat.com> 5.1.2-12
changelog:
  - snmpd crash with 'interfaces' directives in snmpd.conf fixed #139010
  - rather dirty patch fixing conf directory for net-snmp-config


author: Radek Vokal <rvokal@redhat.com> - 5.1.2-3
changelog:
  - patch from CVS - kill extra carriage return (#144917)
  - removed patch for interface indexing - doesn't show virtual interfaces


author: Radek Vokal <rvokal@redhat.com> - 5.2.1-5
changelog:
  - 64bit needed some changes, was causing timeouts on 64bit archs!? 
  - affects bugs #125432 and #132058


author: Radek Vokal <rvokal@redhat.com> - 5.2.1-12
changelog:
  - session free fixed, agentx modules build fine (#157851)
  - fixed dependency for net-snmp libs (#156932)


author: Radek Vokal <rvokal@redhat.com> - 5.2.2-0.rc6.1
changelog:
  - update to rc6, snmpnetstat changes due to license problems
  - persistent files in directory defined by snmp.conf persistentDir are 
    loaded at startup


author: Radek Vokal <rvokal@redhat.com> - 5.2.2-4
changelog:
  - check for header files in configure
  - patch for SNMPv3 traps / session user creation (net-snmp bz#1374087)


author: Radek Vokal <rvokal@redhat.com> 5.3-2
changelog:
  -  Security fix. Bug granting write access to read-only users 
     or communities which were configured  using the "rocommunity" 
     or "rouser" snmpd.conf tokens fixed


author: Radek Vokál <rvokal@redhat.com> 5.3-7
changelog:
  - fix parsing of /proc/diskstats
  - fix disman monitor crash
  - fix perl vendor name
  - fix OID lookup fail


author: Radek Vokal <rvokal@redhat.com> 5.3.1.pre2-1
changelog:
  - update to 5.3.1.pre2
  - fix multilib issues (#192736)
    On system with /usr/lib64 use net-snmp-config64 and net-snmp-config64.h


author: Radek Vokal <rvokal@redhat.com> 5.3.1.0-5
changelog:
  - SMUX support is still needed .. will disappear later!
  - static libs should be in devel not libs (#203571)
  - fix lm_sensors issues


author: Radek Vokál <rvokal@redhat.com> - 1:5.4-13
changelog:
  - fix overly verbose log message (#221911)
  - few minor tweaks for review - still not perfect
  - fix linking with lcrypto (#231805)


author: Jan Safranek <jsafranek@redhat.com> 5.4-14
changelog:
  - fix snmptrapd hostname logging (#238587)
  - fix udpEndpointProcess remote IP address (#236551)
  - fix -M option of net-snmp-utils (#244784)
  - default snmptrapd.conf added (#243536)
  - fix crash when multiple exec statements have the same name
    (#243536)
  - fix ugly error message when more interfaces share
    one IP address (#209861)


author: Jan Safranek <jsafranek@redhat.com> 5.4-16
changelog:
  - supported lm_sensors on ppc64 (#249255)
  - snmpconf generates config files with proper selinux context
    (#247462)
  - fix leak  in udp transport (#247771)
  - add alpha to supported archs in net-snmp-config (#246825)
  - fix hrSWInst (#250237)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-3
changelog:
  - include these tables: ip-mib/ipv4InterfaceTable
    ip-mib/ipv6InterfaceTable, ip-mib/ipAddressPrefixTable
  - fix Requires of net-snmp-devel to include lmsensors-devel on supported
    architectures


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-5
changelog:
  - move mib2c-update from net-snmp-utils to net-snmp-perl, where
    mib2c is located
  - add tkmib to net-snmp-gui package (#167933)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-6
changelog:
  - add support of lm_sensors v3
  - added procps to build dependencies (#380321)
  - removed beecrypt from dependencies
  - fixed crash on reading xen interfaces (#386611)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-9
changelog:
  - introduce /etc/sysconfig/snmpd. Use it to specify snmpd command line options.
    /etc/snmp/snmpd.options is not used anymore (#431391)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-15
changelog:
  - explicitly require lm_sensor > 3 for build (#442718)
  - create multilib net-snmp-config on multilib architectures only


author: Jan Safranek <jsafranek@redhat.com> 5.4.2-2
changelog:
  - redistribute the perl scripts to the net-snmp package,
    net-snmp-utils doesn't depend on perl now (#462484)


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-1
changelog:
  - explicitly require the right version and release of net-snmp and
    net-snmp-libs
  - update to net-snmp-5.4.2.1 to fix CVE-2008-4309


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-12
changelog:
  - make the default configuration less noisy, i.e. do not print "Connection from
    UDP:" and "Received SNMP packet(s) from UDP:" messages on each connection.
    (#509055)


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-13
changelog:
  - package cleanup, remove unnecessary patches
  - move local state file from /var/net-snmp/ to /var/lib/net-snmp


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-2
changelog:
  - introduce /etc/sysconfig/snmptrapd. Use it to specify snmptrapd command
    line options.  /etc/snmp/snmptrapd.options is not used anymore (#540799)
  - build-in ipAddressPrefixTable, ipDefaultRouterTable, ipv6ScopeZoneIndexTable,
    ipIfStatsTable, SCTP-MIB, RMON-MIB and Etherlike-MIBs
  - remove ucd5820stat helper script, it depends on get5820stats, which is not
    available in Fedora
  - move sample services ipf-mod.pl to documentation
  - remove logrotate config, snmpd logs into syslog


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-3
changelog:
  - prepare the .spec file for review
  - run automatic regression suite after the compilation of the package
    to check for obvious regressions
  - remove unnecessary package dependencies


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-4
changelog:
  - fix udpTable indexes on big-endian systems (#543352)
  - fix snmptrapd init script to survive with empty /etc/sysconfig/snmptrapd
  - lower the default log level of snmpd to get rid of the debug messages


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-7
changelog:
  - fix invalid access to memory in tcpListenerTable (#551030)
  - fix crash with interfaces without broadcast addresses (like OpenVPN's tun0)
    (#549390)
  - fix responding to broadcast SNMP requests (#549390)
  - port patches from RHEL-5 to avoid regressions


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-14
changelog:
  - store temporary files in /var/run/net-snmp instead of /tmp (SELinux does
    not allow writing /tmp) (#560081)
  - fix filedescriptor leak in RMON-MIB and Etherlike-MIB (#562108)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-15
changelog:
  - remove net-snmp-gui subpackage, perl-Tk is being removed from
    distro (#568786)
  - fix IF-MIB::ifSpeed of inactive interfaces (#561884)
  - correct the package license


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-19
changelog:
  - fixed exit code of snmp utilities when wrong argument to '-A' option
    is specified (#574061)
  - fixed BER parsing of incoming packets - siletnly discard the invalid ones
    according to RFC (#568651)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-21
changelog:
  - fixed hrFSTable and hrStorageTable to provide persistent table indexes
    according to RFS 2790 (#595325)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-22
changelog:
  - fixed value of ipIfStatsTable.Ip6ReasmReqds (#597265)
  - added missing include files from util_funcs directory (#604636)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-23
changelog:
  - fixed segfault when parsing snmpd.conf with disman entries (#607080)
  - fixed value of IP-MIB::ipv6InterfaceForwarding (#607074)
  - fixed output of snmptranslate tool when displaying ranges of UNSIGNED
    type (#606874)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-27.1
changelog:
  - fixed truncation of sysObjectID (#641113)
  - fixed assertions in calculating of statistics in IF-MIB (#621664)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-28
changelog:
  - fixed recompilation of the package on machine without IPv6 (#657835)
  - fixed SMUX getting stuck on big-endian platforms (#665053)
  - fixed OID comparsion in snmpwalk, now the output does not include
    objects outside requested subtree (#636890)
  - fixed IPv4 address creation in ipAddressTable (#616764)
  - added IPv6 address creation to ipAddressTable (#616336)
  - fixed value of ipAddressPrefixAutonomousFlag OID (#625262)
  - fixed ipv6IfTable - new interfaces were not added there (#627564)
  - extended BRIDGE-MIB implementation to cover RFC 4363 (#630157)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-31
changelog:
  - fixed BRIDGE-MIB implementation in /usr/bin/snmp-bridge-mib,
    now it supports embedded perl and answers GETNEXT requests correctly
    (#630157).


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-32
changelog:
  - fixed varbind parsing in python netsnmp module (#711481)
  - fixed session initialization in python netsnmp module (#710667)
  - fixed crash when getting out-of-memory in inetNetToMediaTable (#708947)
  - added xfs and jfs filesystem support to hrStorageTable (#707912)
  - fixed snmpd to purge zombies resulted from pass_persist process exit
    (#703682)
  - added a log message when snmpd detects two interfaces with the same
    IP address and thus having only one ipTable entry for both (#702171)
  - added new snmpd.conf options 'interface_fadeout' and
    'interface_replace_old' to controll snmpd behavior when more
    interfaces get the same name (#702165)
  - fixed snmptrapd leaking memory when processing traps in embedded perl
    (#678314)
  - fixed hrSystemDate timezone sign (#683680)
  - fixed snmp logging 'truncating integer value > 32 bits' for
    UCD-SNMP-MIB::systemStats (#681949)
  - fixed rare race condition in hrSWRunTable (#683563)
  - recompiled with relro for better security (#725657)
  - snmpd should not change request-id when sending multiple SMUX messages
    (#708370)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-38
changelog:
  - fixed snmpd crashing with many AgentX subagent (#749227)
  - fixed SNMPv2-MIB::sysObjectID value when "sysObjectID" config file
    option with long OID was used (#786931)
  - fixed value of BRIDGE-MIB::dot1dBasePortIfIndex.1 (#740172)
  - fixed parsing of "proxy" snmpd.conf option not to enable
    verbose logging by default (#746903)
  - added new "realStorageUnits" config file option to support
    disks > 16 TB in hrStorageTable (#741789)
  - added vxfs, reiserfs and ocfs2 filesystem support to hrStorageTable
    (#746903)
  - fixed snmpd sigsegv when embedded perl script registers one handler
    twice (#748907)
  - fixed setting of SNMP-TARGET-MIB::snmpTargetAddrRowStatus via
    SNMP-SET request on 64-bit platforms (#754275)
  - fixed crash when /var/lib/net-snmp/mib_indexes/ files have wrong
    SELinux context (#754971)
  - fixed memory leak when agentx subagent disconnects in the middle
    of request processing (#736580)
  - fixed slow (re-)loads of TCP-MIB::tcpConnectionTable (#789909)
  - removed 'error finding row index in _ifXTable_container_row_restore'
    error message (#788954)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-43
changelog:
  - fixed value of UCD-SNMP-MIB::extCommand to contain full command
    line (#842279)
  - fixed rpath to perl.so (#848319)
  - added support for port numbers in 'clientaddr' configuration
    option (#833013)
  - fixed rare snmptrapd crash on SIGHTERM handling when embedded perl
    is used (#824402)
  - fixed engineID of outgoing traps if 'trapsess -e <engineID>' is used in
    snmpd.conf (#800671)
  - updated documentation of '-c' option of snmptrapd (#784502)
  - fixed endless loop when SIGTEM arrives in middle of internal query
    processing (#851637)
  - fixed UCD-DISKIO-MIB::diskIOLA values (#848155)
  - removed various error log messages related to counte64 expansions
    (#846906)
  - removed various error log messages when IPv6 is disabled (#845157)
  - added support of cvfs filesystem in hrStorageTable (#846532)
  - fixed rare race condintion when populating UCD-SNMP-MIB::prTable,
    which could result in some entries missing in the table (#846436)
  - added support of simfs filesystem in hrStorageTable (#861152)
  - fixed responding to requests on a multihost machine (#825889)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-45
changelog:
  - fixed potential memory leak on realloc failure when processing 'extend'
    option (#893119)
  - added precise enumeration of configuration files searched to
    snmp_config(5) man page (#907571)
  - set permissions of snmpd.conf and snmptrapd conf to 0600 (#919239)
  - fixed kernel threads in hrSWRunTable (#919952)
  - fixed various error codes in Python module (#955771)
  - fixed snmpd crashing in the middle of agentx request processing when
    a subagent disconnects (#955511)
  - allow 'includeFile' and 'includeDir' options in configuration files
    (#917816)
  - fixed netlink message size (#927474)
  - fixed IF-MIB::ifSpeedHi on systems with non-standard interface speeds
    (#947973)
  - fixed BRIDGE-MIB::dot1dBasePortTable not to include the bridge itself
    as a port (#960568)
  - fixed snmpd segfault when 'agentaddress' configuration options is used
    and too many SIGHUP signals are received (#968898)
  - updated UCD-SNMP-MIB::dskTable to dynamically add/remove disks
    if 'includeAllDisks' is specified in snmpd.conf (#922691)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-46
changelog:
  - fixed parsing of bulk responses (#983116)
  - added support of vzfs filesystem in hrStorageTable (#989498)
  - fixed endless loop when parsing sendmail configuration file with
    queue groups (#991213)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-49
changelog:
  - fixed snmp daemons and utilities crashing in FIPS mode (#1001830)
  - added support of btrfs filesystem in hrStorageTable (#1006706)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-50
changelog:
  - added 'diskio' option to snmpd.conf, it's possible to monitor only selected
    devices in diskIOTable (#990674)
  - fixed CVE-2014-2284: denial of service flaw in Linux implementation of
    ICMP-MIB (#1073223)
  - added cache to hrSWRunTable to provide consistent results (#1007634)
  - skip 'mvfs' (ClearCase) when skipNFSInHostResources is enabled (#1073237)
  - fixed snmptrapd crashing on forwarding SNMPv3 traps (#1131844)
  - fixed HOST-RESOURCES-MIB::hrSystemProcesses (#1134335)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-51
changelog:
  - added faster caching into IP-MIB::ipNetToMediaTable (#789500)
  - fixed compilation with "-Werror=format-security" (#1181994)
  - added clear error message when port specified in 'clientaddrr' config
    option cannot be bound (#886468)
  - fixed error check in IP-MIB::ipAddressTable (#1012430)
  - fixed agentx client crash on failed response (#1023570)
  - fixed dashes in net-snmp-config.h (#1034441)
  - fixed crash on monitor trigger (#1050970)
  - fixed 'netsnmp_assert 1 == new_val->high failed' message in system log
    (#1065210)
  - fixed parsing of 64bit counters from SMUX subagents (#1069046)
  - Fixed HOST-RESOURCES-MIB::hrProcessorTable on machines with >100 CPUs
    (#1070075)
  - fixed net-snmp-create-v3-user to have the same content on 32 and 64bit
    installations (#1073544)
  - fixed IPADDRESS value length in Python bindings (#1100099)
  - fixed hrStorageTable to contain 31 bits integers (#1104293)
  - fixed links to developer man pages (#1119567)
  - fixed storageUseNFS functionality in hrStorageTable (#1125793)
  - fixed netsnmp_set Python bindings call truncating at the first '\000'
    character (#1126914)
  - fixed log level of SMUX messages (#1140234)
  - use python/README to net-snmp-python subpackage (#1157373)
  - fixed forwarding of traps with RequestID=0 in snmptrapd (#1146948)
  - fixed typos in NET-SNMP-PASS-MIB and SMUX-MIB (#1162040)
  - fixed close() overhead of extend commands (#1188295)
  - fixed lmSensorsTable not reporting sensors with duplicate names (#967871)
  - fixed hrDeviceTable with interfaces with large ifIndex (#1195547)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-52
changelog:
  - Fixed snmptrapd crash when '-OQ' parameter is used and invalid trap is
    received (#CVE-2014-3565)


author: Christopher Aillon <caillon@redhat.com> 4.6-4
changelog:
  - Use the NSPR version numbering scheme reported by NSPR,
    which unfortunately is not exactly the same as the real
    version (4.6 != 4.6.0 according to RPM and pkgconfig).


author: Christopher Aillon <caillon@redhat.com>
changelog:
  - Stop shipping static libraries; NSS and dependencies no longer
    require static libraries to build.


author: Kai Engert <kengert@redhat.com> 4.6.1-2
changelog:
  - Do not use -ansi when compiling, because of a compilation
    problem with latest glibc and anonymous unions.
    See also bugzilla.mozilla.org # 322427.


author: Kai Engert <kengert@redhat.com> - 4.6.5-2
changelog:
  - Update to latest ipv6 upstream patch
  - Add upstream patch to fix a thread cleanup issue
  - Now requires pkgconfig


author: Kai Engert <kengert@redhat.com> - 4.6.6-2
changelog:
  - Update thread-cleanup patch to latest upstream version
  - Add upstream patch to support PR_STATIC_ASSERT


author: Elio Maldonado <emaldona@redhat.com> - 4.9.5-3
changelog:
  - Bump the release tag so it's higher than the one for rhel-6.4.z
  - Resolves: rhbz#919180 - Rebase to nspr-4.9.5


author: Elio Maldonado <emaldona@redhat.com> - 4.10.0-1
changelog:
  - Update Version to 4.10.0 to prevent Mozilla apps update problems as
  - reported and fixed on https://bugzilla.redhat.com/show_bug.cgi?id=981166
  - Resolves: rhbz#1002643 - Rebase RHEL 6 to NSPR 4.10 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 4.10.0-2
changelog:
  - Rebase to nspr-4.10.2
  - Resolves: rhbz#1032488 - CVE-2013-5607 (MFSA 2013-103) Avoid unsigned integer wrapping in PL_ArenaAllocate (MFSA 2013-103)


author: Elio Maldonado <emaldona@redhat.com> - 4.10.8-1
changelog:
  - Rebase to nspr-4.10.8
  - Resolves: Bug 1200920 - Rebase nspr to 4.10.8 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 4.10.8-2
changelog:
  - Resolves: Bug 1269360 - CVE-2015-7183
  - nspr: heap-buffer overflow in PL_ARENA_ALLOCATE can lead to crash (under ASAN), potential memory corruption


author: Christopher Aillon <caillon@redhat.com> 3.11-0.cvs
changelog:
  - Initial import into Fedora Core, based on a CVS snapshot of
    the NSS_3_11_RTM tag
  - Fix up the pkcs11-devel subpackage to contain the proper headers
  - Build with RPM_OPT_FLAGS
  - No need to have rpath of /usr/lib in the pc file


author: Kai Engert <kengert@redhat.com> - 3.11.3-2
changelog:
  - Revert the attempt to require latest NSPR, as it is not yet available
    in the build infrastructure.


author: Kai Engert <kengert@redhat.com> - 3.11.5-1
changelog:
  - Update to 3.11.5
  - This update fixes two security vulnerabilities with SSL 2
  - Do not use -rpath link option
  - Added several unsupported tools to tools package


author: Kai Engert <kengert@redhat.com> - 3.11.5-2
changelog:
  - Fix rhbz#230545, failure to enable FIPS mode
  - Fix rhbz#220542, make NSS more tolerant of resets when in the 
    middle of prompting for a user password.


author: Kai Engert <kengert@redhat.com> - 3.11.7-2
changelog:
  - Update to 3.11.7, but freebl/softokn remain at 3.11.5.
  - Use a workaround to avoid mozilla bug 51429.


author: Kai Engert <kengert@redhat.com> - 3.11.7-10
changelog:
  - Add /etc/prelink.conf.d/nss-prelink.conf in order to blacklist
    our signed libraries and protect them from modification.


author: Kai Engert <kengert@redhat.com> - 3.11.99.3-2
changelog:
  - Build against gcc 4.3.0, use workaround for bug 432146
  - Run the test suite after the build and abort on failures.


author: Kai Engert <kengert@redhat.com> - 3.12.0.3-3
changelog:
  - nss package should own /etc/prelink.conf.d folder, rhbz#452062
  - use upstream patch to fix test suite abort


author: Kai Engert <kaie@redhat.com> - 3.12.3-3
changelog:
  - ship .chk files instead of running shlibsign at install time
  - include .chk file in softokn-freebl subpackage
  - add patch for upstream nss bug 488350


author: Kai Engert <kaie@redhat.com> - 3.12.3-7
changelog:
  - re-enable test suite
  - add patch for upstream bug 488646 and add newer paypal
    certs in order to make the test suite pass


author: Elio Maldonado <emaldona@redhat.com> - 3.12.3.99.3-5
changelog:
  - updated pem module incorporates various patches
  - fix off-by-one error when computing size to reduce memory leak. (483855)
  - fix data type to work on x86_64 systems. (429175)
  - fix various memory leaks and free internal objects on module unload. (501080)
  - fix to not clone internal objects in collect_objects().  (501118)
  - fix to not bypass initialization if module arguments are omitted. (501058)
  - fix numerous gcc warnings. (500815)
  - fix to support arbitrarily long password while loading a private key. (500180) 
  - fix memory leak in make_key and memory leaks and return values in pem_mdSession_Login (501191)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.3.99.3-10
changelog:
  - must install libnssutil3.since nss-util is untagged at the moment
  - preserve time stamps when installing various files


author: Elio Maldonado+emaldona@redhat.com - 3.12.3.99.3-11
changelog:
  - split off nss-softokn and nss-util as subpackages with their own rpms
  - first phase of splitting nss-softokn and nss-util as their own packages


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-19
changelog:
  - remove patches that are now in nss-softokn and
  - remove spurious exec-permissions for nss.pc per rpmlint
  - single requires line in nss.pc.in


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-22
changelog:
  - Fix nss-config not to include nssutil
  - Add BuildRequires on nss-softokn and nss-util since build also runs the test suite


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-25
changelog:
  - Remove nss-prelink.conf as signed all shared libraries moved to nss-softokn
  - Add a temprary hack to nss.pc.in to unblock builds


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-29
changelog:
  - Restoring patches 2 and 7 as we still compile all sources
  - Applying the nss-nolocalsql.patch solves nss-tools sqlite dependency problems


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-30
changelog:
  - Fix FORTIFY_SOURCE buffer overflows in test suite on ppc and ppc64 - bug 519766
  - Fixed requires and buildrequires as per recommendations in spec file review


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-2
changelog:
  - Remove symbolic links to shared libraries from devel - 521155
  - No rpath-link in nss-softokn-config


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-3
changelog:
  - PEM module implements memory management for internal objects - 509705
  - PEM module doesn't crash when processing malformed key files - 512019


author: Elio Maldonado<emaldona@redhat.com - 3.12.4-9
changelog:
  - Install blank databases and configuration file for system shared database
  - nsssysinit queries system for fips mode before relying on environment variable


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-14
changelog:
  - Fix bug where user was prompted for a password when listing keys on an empty system database (#527048)
  - Fix setup-nsssysinit to handle more general flags formats (#527051)


author: Elio Maldonado<emaldona@redhat.com> - 3.12.5-1.8
changelog:
  - Fix nsssysinit to set the default flags on the crypto module (#545779)
  - Fix nsssysinit to enable apps to use the system cert store, patch contributed by David Woodhouse (#546221)
  - Fix segmentation fault when listing keys or certs in the database, patch contributed by Kamil Dudka (#540387)
  - Sysinit requires coreutils for post install scriplet (#547067)
  - Remove redundant header from the pem module


author: Elio Maldonado <emaldona@redhat.com> - 3.12.5-7.1
changelog:
  - Updated to 3.12.5 from CVS import from Fedora 12
  - Moved blank legacy databases to the lookaside cache
  - Reenabled the full test suite
  - Retagging for a RHEL-6-test-build


author: Elio Maldonado <emaldona@redhat.com> - 3.12.5-7.3
changelog:
  - Resolves: #551784 rebuilt after nss-softokn and nss-util builds
  - this will generate the coorect nss.spec


author: Elio Maldonado <emaldona@redhat.com> - 3.12.6-5
changelog:
  - Appying the changes in previous log
  - Changing some BuildRequires to >= as well
  - Temporarily disabling all tests for faster builds


author: Elio Maldonado <emaldona@redhat.com> - 3.12.8-2
changelog:
  - Add suppport for pkcs8 formatted keys in the pem module
  - Add verify(not md5 size mtime) to configuration files attributes
  - Prevent nss-sysinit disabling on package upgrade
  - Create pkcs11.txt with correct permissions regardless of current umask
  - Add option to setup-nsssysinit.sh to report nss-sysinit status
  - Update test certificate which had expired


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-2
changelog:
  - Prefer user database ca cert trust settings system's ones
  - Swap internal key slot on fips mode switches


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-3
changelog:
  - Add requires for pkcs11-devel on nss-softokn-freebl devel
  - Run the test suites in check section per packaging guidelines


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-7
changelog:
  - Update expired PayPayEE.cert test certificate
  - Conditionalize some database tests on user not being root


author: Elio Maldonado <emaldona@redhat.com> - 3.13.1-1
changelog:
  - Resolves: Bug 744070 - Update to 3.13.1
  - Resolves: Bug 784674 - nss should protect against being called before nss_Init
  - Resolves: Bug 784490 - CVE-2011-3389 HTTPS: block-wise chosen-plaintext attack against SSL/TLS (BEAST)


author: Elio Maldonado <emaldona@redhat.com> - 3.13.1-4
changelog:
  - Add two needed patches
  - Resolves: rhbz#783315 - Need nss workaround for freebl bug that causes openswan to drop connections
  - Resolves: rhbz#747387 - Unable to contact LDAP Server during winsync


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-1
changelog:
  - Update to 3.13.3
  - Resolves: rhbz#798539 - Distrust MITM subCAs issued by TrustWave
  - Remove builtins-nssckbi_1_88_rtm.patch which the rebase obsoletes


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-2
changelog:
  - Resolves: rhbz#746632 - pem_CreateObject mem leak on non existing file name
  - Resolves: rhbz#768669 - PEM unregistered callback causes SIGSEGV


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-3
changelog:
  - Resolves: rhbz#746632 - pem_CreateObject mem leak on non existing file name
  - Use completed patch per code review


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-1
changelog:
  - Rebase to nss-3.14.0.0-1
  - Resolves: rhbz#837089
  - Update ssl-cbc-random-iv patch for new sources
  - Remove patches rendered obsoleted by rebase to 3.14
  - Add a patch to enforce no pkcs11 bypass


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-7
changelog:
  - Add dummy sources file to test for and prevent breaking rhpkg commands
  - Enable testing for 'rhpk upload' and 'rhpk new-sources' breakage such as hangs
  - Related: rhbz#837089


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-8
changelog:
  - PEM peminit returns CKR_CANT_LOCK when needed to inform caller module isn't thread safe
  - Resolves: rhbz#555019 - [PEM] invalid writes in multi-threaded libcurl based application


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-9
changelog:
  - Fix locking issue causing curl hangs and authenticate to the correct session
  - Resolves: rhbz#872838


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-12
changelog:
  - Recreate the distrust patch by backporting the upstream one
  - Resolves: rhpbz#890914 - Dis-trust TURKTRUST mis-issued *.google.com certificate


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-1
changelog:
  - Update to NSS_3.14.3_RTM
  - Resolves: rhbz#918950 - [RFE][RHEL6] Rebase to nss-3.14.3 to fix the lucky-13 issue
  - Update expired test certificates (fixed in upstream bug 852781)
  - Sync up pem module's rsawrapr.c with softoken's upstream changes for nss-3.14.3
  - Reactivate the aia tests


author: Elio Maldonado - 3.14.3-2
changelog:
  - Install sechash.h and secmodt.h which are now provided by nss-devel
  - Resolves: rhbz#918950 - [RFE][RHEL6] Rebase to nss-3.14.3 to fix the lucky-13 issue
  - Remove unsafe -r option from commands that remove headers already shipped by nss-util and nss-softoken


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-3
changelog:
  - Ensure pem uses system freebl as with this update freebl brings in new API's
  - Resolves: rhbz#918950 - [RFE][RHEL6] Rebase to nss-3.14.3 to fix the lucky-13 issue


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-4
changelog:
  - Revert to accepting MD5 on digital signatures by default
  - Resolves: rhbz#918136 - nss 3.14 - MD5 hash algorithm disabled


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-5
changelog:
  - Syncup with uptream changes for aes gcm and ecc suiteb
  - Enable ecc support for suite b
  - Apply several upstream AES GCM fixes
  - Use the pristine nss upstream sources with ecc included
  - Export NSS_ENABLE_ECC=1 in both the build and the check sections
  - Make failed requests for unsupoprted ssl pkcs 11 bypass non fatal
  - Resolves: rhbz#882408 - NSS_NO_PKCS11_BYPASS must preserve ABI
  - Related:  rhbz#918950  - rebase nss to 3.14.3


author: Kai Engert <kaie@redhat.com> - 3.14.3-33
changelog:
  - Configure libnssckbi.so to use the alternatives system
    in order to prepare for a drop in replacement.
    Please ensure that older packages that don't use the alternatives
    system for libnssckbi.so have a smaller n-v-r.


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-34
changelog:
  - Fix race condition in cert code related to smart cards
  - Resolves: rhbz#903017 - Firefox hang when CAC/PIV smart card certificates are viewed in the certificate manager


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-37
changelog:
  - Do not hold issuer certificate handles in the crl cache
  - Resolves: rhbz#961659 - SQL backend does not reload certificates


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-1
changelog:
  - Rebase to NSS_3.15.1_RTM
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x) 
  - Update patches on account of the shallow tree with the rebase to 3.15.1
  - Update the pem module sources  nss-pem-20130405.tar.bz2 with latest patches applied
  - Remove patches rendered obsolete by the nss rebase and the updated nss-pem sources
  - Enable the iquote.patch to access newly introduced types


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-2
changelog:
  - Fix relative path in %check section to prevent undetected test failures
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-4
changelog:
  - Require nss-softokn-fips
  - Resolves: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-5
changelog:
  - Disable the cipher suite already run as part of the nss-softokn build
  - Resolves: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-6
changelog:
  - Fix all.sh test for which application was last build by updating nss-versus-softoken-test.path
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Kai Engert <kaie@redhat.com> - 3.15.1-7
changelog:
  - Additional syntax fixes in nss-versus-softoken-test.patch
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-8
changelog:
  - Don't require nss-softokn-fips
  - Resolves: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-9
changelog:
  - Rebuild for the pem module to link with freel from nss-softokn-3.14.3-6.el6
  - Related: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]
  - Related: rhbz#1010224 - NSS 3.15 breaks SSL in OpenLDAP clients


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-10
changelog:
  - Restore a mistakenly removed patch
  - Resolves: rhbz#961659 - SQL backend does not reload certificates


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-11
changelog:
  - Fix the test for zero failures in the %check section
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-12
changelog:
  - Add a zero default value to the DISABLETEST and TEST_FAILURES checks
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-13
changelog:
  - Add zero default value to DISABLETEST check and fix the TEST_FAILURES check and reporting
  - Resolves: rhbz#990631 - file permissions of pkcs11.txt/secmod.db must be kept when modified by NSS
  - Related: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-14
changelog:
  - Add s390x and ia64 to the %define multilib_arches list used for defining alt_ckbi
  - Resolves: rhbz#1016044 - nss.s390: primary link for libnssckbi.so must be /usr/lib64/libnssckbi.so


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-15
changelog:
  - Using export NSS_DISABLE_HW_GCM=1 to deal with some problemmatic build systems
  - Resolves: rhbz#1016044 - nss.s390: primary link for libnssckbi.so must be /usr/lib64/libnssckbi.so


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-1
changelog:
  - Update to NSS_3_15_3_RTM
  - Resolves: Bug 1032472 - CVE-2013-5605 CVE-2013-5606 CVE-2013-1741
  - Resolves: Bug 1031238 - deadlock in trust domain lock and object lock


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-2
changelog:
  - Build nss without softoken, freebl, or util sources in the build source tree
  - Resolves: Bug 1032472 - CVE-2013-5605 CVE-2013-5606 CVE-2013-1741


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-3
changelog:
  - Disable hw gcm on rhel-5 based build environments where OS lacks support
  - Rollback changes to build nss without softokn until Bug 689919 is approved
  - Cipher suite was run as part of the nss-softokn build


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-4
changelog:
  - Revoke trust in one mis-issued anssi certificate
  - Resolves: Bug 1042686 - nss: Mis-issued ANSSI/DCSSI certificate (MFSA 2013-117) [rhel-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-5
changelog:
  - Resolves: Bug 895339 - [PEM] active FTPS with encrypted client key ends up with SSL_ERROR_TOKEN_INSERTION_REMOVAL


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-6
changelog:
  - make derEncodingsMatch work with encrypted keys
  - rename a patch, dropped the experimental moniker from it
  - Resolves: Bug 895339 - [PEM] active FTPS with encrypted client key ends up with SSL_ERROR_TOKEN_INSERTION_REMOVAL


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-7
changelog:
  - Fix the numbering and naming of the patches
  - Resolves: Bug 895339 - [PEM] active FTPS with encrypted client key ends up with SSL_ERROR_TOKEN_INSERTION_REMOVAL


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-8
changelog:
  - Install man pages for the nss security tools
  - Resolves: Bug 606022 - nss security tools lack man pages


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-9
changelog:
  - Improve support for ECDSA algorithm via pluggable ECC
  - Document the purpose of the iquote.patch
  - Resolves: Bug 1057224 - Pluggable ECC in NSS not enabled on RHEL 6 and above


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-10
changelog:
  - Prevent users from disabling the internal crypto module
  - Resolves: Bug 1059176 - nss segfaults with opencryptoki module


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-11
changelog:
  - Resolves: Bug 689919 - build without any softoken or util sources in the tree
  - Add define-uint32.patch to deal with using older version of nss-softokn
  - Fix suboptimal test failure detection shell code in the %check
  unset DISPLAY
   section


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-2
changelog:
  - Restore use of indentation patch until another bug is resolved
  - Resolves: Bug 606022 - nss security tools lack man pages


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-3
changelog:
  - Fix pem module trashing of private keys on failed login
  - Resolves: Bug 1002205 - PEM module trashes private keys if login fails


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-5
changelog:
  - Move removal of directories to the end of the %prep section
  - Resolves: Bug 689919 - build without any softoken or util sources in the tree


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-6
changelog:
  - Update pem sources to the same ones used on rhel-7
  - Remove no longer needed patches on account of this update
  - Resolves: Bug 1002205


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-15
changelog:
  - Resolves: Bug 1165003 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Support TLS_FALLBACK_SCSV in tstclnt and ssltap


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-2
changelog:
  - Restore patch for certutil man page
  - supply missing options descriptions to the man page
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-3
changelog:
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Remove unused indentation pseudo patch
  - require nss util 3.16.2.3


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-1
changelog:
  - Rebase to NSS 3.18
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]
  - Keep the same cipher suite order as we had in NSS_3_15_3_RTM
  - Resolves: Bug 1202488 - openldap-2.4.23-34.el6_5.1.i686 fails after updating nss to nss-3.16.1-4.el6_5.i686
  - Resolves: Bug 1182902 - rhel65 ns-slapd crash, segfault error 4 in libnss3.so in PK11_DoesMechanism at pk11slot.c:1824


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-2
changelog:
  - Replace expired PayPal test certificate that breaks the build
  - Resolves: Bug 1207052 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-3
changelog:
  - Restore a patch that had been mistakenly disabled
  - Resolves: Bug 1207052 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-4
changelog:
  - Fix shell syntax error in nss/tests/all.sh
  - Resolves: Bug 1207052 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-5
changelog:
  - Update and reeneable nss-646045.patch on account of the rebase
  - Resolves: Bug 1207052 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL7.1]


author: Kai Engert <kaie@redhat.com> - 3.18.0-5.1
changelog:
  - Require softokn build 22 to ensure runtime compatibility.
  - Update to CKBI 2.4 from NSS 3.18.1 (the only change in NSS 3.18.1)


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-3
changelog:
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Remove unused indentation pseudo patch
  - require nss util 3.16.2.3
  - Restore patch for certutil man page
  - supply missing options descriptions to the man page


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-4
changelog:
  - Keep the same cipher suite order as we had in NSS_3_15_3_RTM
  - Resolves: Bug 1123092 - openldap-2.4.23-34.el6_5.1.i686 fails after updating nss to nss-3.16.1-4.el6_5.i686


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-1
changelog:
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]
  - Resolves: Bug 1131311 - rhel65 ns-slapd crash, segfault error 4 in libnss3.so in PK11_DoesMechanism at pk11slot.c:1824
  - Temporarily disable some tests until expired PayPalEE.cert is renewed


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-2
changelog:
  - Replace expired PayPal test certificate that breaks the build
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-3
changelog:
  - Restore a patch that had been mistakenly disabled
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-4
changelog:
  - Fix shell syntax error in nss/tests/all.sh
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-5
changelog:
  - Update and reeneable nss-646045.patch on account of the rebase
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL7.1]


author: Kai Engert <kaie@redhat.com> - 3.18.0-5.3
changelog:
  - On RHEL 6.x keep the TLS version defaults unchanged.
  - Require softokn build 22 to ensure runtime compatibility.
  - Relax the requirement from pkcs11-devel to nss-softokn-freebl-devel
    to allow same or newer.
  - Update to CKBI 2.4 from NSS 3.18.1 (the only change in NSS 3.18.1)


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-8
changelog:
  - Prevent TLS 1.2 Transcript Collision attacks against MD5 in key exchange protocol
  - Resolves: Bug 1289881


author: Elio Maldonado <emaldona@redhat.com> - 3.12.4-11
changelog:
  - Move libfreebl3.so and its .chk file to /lib{64} keeping
  - symbolic links to them in /usr/lib{64} so as not break others


author: Elio Maldonado <emaldona@redhat.com> - 3.12.4-16
changelog:
  - allow prelink of softoken and freebl. Change the verify code to use
    prelink -u if prelink is installed. Fix by Robert Relyea


author: Elio Maldonado <emaldona@redhat.com> - 3.12.6-2.1
changelog:
  - Don't enable FIPS when CONFIG_CRYPTO_FIPS=n
  - Fix typo in the package description
  - Fix capitalization error in prelink conflict statement
  - Require nspr 4.8.4


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-4
changelog:
  - Resolves: rhbz#710298 - fix intel optimized aes code to handle case where input and ouput are in the same buffer


author: Elio Maldonado - 3.12.9-12
changelog:
  - Bootstrapping of the builroot in preparation for rebase to 3.14.3
  - Remove hasht.h from the %files devel list to prevent update conflicts with nss-util
  - With 3.14.3 hasht.h will be provided by nss-util-devel
  - Related: rhbz#919172 - rebase nss-softokn to 3.14.3


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-1
changelog:
  - Update to NSS_3_14_3_RTM
  - Resolves: rhbz#919172 - Rebase to nss-softokn 3.14.3 to fix the lucky-13 issue
  - Add export LD_LIBRARY_PATH=$RPM_BUILD_ROOT//usr/lib64 before the signing commands in __spec_install_post scriplet
    to ensure signing tool links with in-tree freebl so verification uses same algorithm as in signing
  - Add %check section to run the upstream crypto reqression test suite as per packaging guidelines
  - Don't install sechash.h or secmodt.h which as per 3.14 are provided by nss-devel
  - Update the licence to MPLv2.0


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-3
changelog:
  - Add patch to conditionally compile according to old or new sqlite api
  - new is used on rhel-6 while rhel-5 uses old but we need the same code for both
  - Resolves: rhbz#919172 - Rebase to nss-softokn 3.14.3 to fix the lucky-13 issue


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-4
changelog:
  - Enable ECC support for suite b and add upstream fixes for aec gcm
  - Use the unstripped upstream sources with ecc support
  - Limit the ECC support to suite b
  - Apply several upstream aes gcm fixes
  - Rename macros EC_MIN_KEY_BITS and EC_MAX_KEY_BITS per upstream
  - Resolves: rhbz#960208 - Enable ECC in nss-softoken
  - Related: rhbz#919172


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-5
changelog:
  - Resolves: rhbz#976572 - Pick up various upstream GCM code fixes applied since nss-3.14.3 was released
  - Display cpuifo as part of the tests and make NSS_DISABLE_HW_GCM the environment variable to test for
  - When appling the patches use a backup file suffix that better describes the patch purpose


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-6
changelog:
  - create -fips packages 
  - patch submitted by Bob Relyea <rrelyea@redhat.com>
  - fix the script that splits softoken off from nss
  - patch nss/cmd/lib/basicutil.c to build against nss-util-3.15.1
  - Resolves: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-7
changelog:
  - Fix the PR_Access stub to actually access the correct permissions
  - Resolves: rhbz#1008513 - Unable to login in fips mode
  - Run the lowhash tests
  - Require nspr-4.0.0 and nss-util-3.15.1


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-8
changelog:
  - Enable new packaging but don't apply nss-fips-post.patch
  - Related: rhbz#1008513 - Unable to login in fips mode


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-11
changelog:
  - Skip calls to CHECK_FORK in {C & NSC}_GetFunctionList
  - Resolves: Bug 1053437 - Admin server segfault when configuration DS configured on SSL port


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-12
changelog:
  - Avoid call to sdb_measureAccess in lib/softoken/sdb.c s_open if NSS_SDB_USE_CACHE is "yes" or "no"
  - Resolves: Bug 1044666 - Can curl HTTPS requests make fewer access system calls?


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-15
changelog:
  - Fix shlibsign to return non-zero on failure
  - Resolves: Bug 587634 - shlibsign returns 0 although if fails


author: Bob Relyea <rrelyea@redhat.com> - 3.14.3-21
changelog:
  - Require nss-softokn-freebl of at least the same version and release
  - Resolves: Bug 1182662 - nss-softokn-3.14.3-19.el6_6 breaking yum and rpm


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-23
changelog:
  - Pick up upstream freebl patch for CVE-2015-2730
  - Check for P == Q or P ==-Q before adding P and Q


author: Dennis Gilmore <dennis@ausil.us> 3.12.3.99.3-10
changelog:
  - dont include the headers in nss-util only in the -devel package
  - nss-util-devel Requires nss-devel since its only providing a subset of the headers.


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-11
changelog:
  - Remove spurious executable permissions from nss-util-config
  - Shorten some descriptions to keep rpmlint happy


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-3
changelog:
  - Remove symbolic links to shared libraries from devel - 521155
  - Apply nss-nolocalsql patch subset for nss-util
  - No rpath-link in nss-util-config


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-2
changelog:
  - Resolves: rhbz#799192 - Update to 3.13.3
  - Update minimum nspr version for Requires and BuildRequires to 4.9
  - Fix version/release in changelog to match the Version and Release tags, now 3.13.3-2


author: Elio Maldonado <emaldona@redhat.com> - 3.13.5-1
changelog:
  - Update to NSS_3_13_5_RTM
  - Resolves: rhbz#833480 - Update nss-util on RHEL 6.x to NSS 3.13.5 for Mozilla 10.0.6
  - Add -L${libdir}/nss3 to Libs: line in nspr.pc.in


author: Elio Maldonado <emaldona@redhat.com> - 3.13.5-3
changelog:
  - Update to nss-3.14.0.0-1
  - Add temporary patch so utilmod doesn't include any headers from softoken
  - Keep the hasht.h from current nss-softokn-devel
  - Remove the long obsoleted nss-nolocalsql.patch


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-1
changelog:
  - Update to NSS_3_14_3_RTM
  - Resolves: rhbz#919174 - Rebase to 3.14.3 as part of the fix for the lucky-13 issue


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-4
changelog:
  - Resolves: rhbz#976572 - Pick up various upstream GCM code fixes applied since nss-3.14.3 was released


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-5
changelog:
  - Update to NSS_3_15_1_RTM
  - Resolves: rhbz#1002644 - Rebase RHEL 6 to NSS-UTIL 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-3
changelog:
  - Preserve existing permissions when replacing existing pkcs11.txt file, but keep strict default permissions for new files
  - Resolves: rhbz#990631 - file permissions of pkcs11.txt/secmod.db must be kept when modified by NSS


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-2
changelog:
  - Add nss-util portion of a fix for pluggable ecc bug in nss and nss-util
  - Resolves: Bug 1057224 - Pluggable ECC in NSS not enabled on RHEL 6 and above


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-3
changelog:
  - Apply the patch for the pluggable ecc fix
  - Resolves: Bug 1057224 - Pluggable ECC in NSS not enabled on RHEL 6 and above


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-4
changelog:
  - nssutil_growList and nssutil_ReadSecmodDB cleanup
  - Resolves: Bug 1019529 - New defect found in nss-util-3.14.0.0-2.el6


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-4
changelog:
  - Resolves: Bug 1165003 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Remove patches rendered obsolete by the rebase


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-2
changelog:
  - Resolves: Bug 1165003 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Fix the required nspr version to be 4.10.6


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-1
changelog:
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Remove patches rendered obsolete by the rebase


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-2
changelog:
  - Fix the required nspr version to be 4.10.6
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3


author: Rob Crittenden <rcritten@redhat.com> 0.9.1-2
changelog:
  - rename LICENSE to COPYING
  - don't ship the .la in -devel
  - fixup devel requirement to be exactly the parent package, not >=


author: Rob Crittenden <rcritten@redhat.com> 0.9.2-1
changelog:
  - update to 0.9.2
  - Enable loading the NSS PKCS#11 pem module
  - Add a URL
  - Specify the license as LGPLv2+ instead of just LGPL


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - comment out default values for keys, warn about starting with -A (#19316).
  - take out -A from ntpd startup as well.
  - update to 4.0.99k.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - allow comments in %{_sysconfdir}/ntp/step-tickers file (#28786).
  - need patch0 (glibc patch) on ia64 too


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - require/buildprereq libcap/libcap-devel
  - use 'ntp' user, tune the pre/post scripts, %files
  - add $OPTIONS to the init script


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Add the remote root exploit patch (based on ntp-hackers).
  - Enhance droproot patch (more documentation, etc.) <Jarno.Huuskonen@uku.fi>
  - Tweak the droproot patch to include sys/prctl.h, not linux/prctl.h
  (implicit declarations)
  - Remote groupdel commands, shouldn't be needed.
  - Removed -Wcast-qual and -Wconversion due to excessive warnings (hackish).
  - Make ntp compilable with both glibc 2.1 and 2.2.x (very dirty hack)
  - Add %{_sysconfdir}/sysconfig/ntpd which drops root privs by default


author: Harald Hoyer <harald@redhat.de>
changelog:
  - new snapshot
  - removed typos and security patch (already there)
  - commented multicastclient in config file


author: Harald Hoyer <harald@redhat.de> 4.1.0-1
changelog:
  - wow, how stupid can a man be ;).. fixed #50698 
  - updated to 4.1.0 (changes are small and in non-critical regions)


author: Harald Hoyer <harald@redhat.de> 4.1.0b-4
changelog:
  - created drift with dummy value #58294
  - grep for timeservers in ntp.conf also for ntpdate #57837
  - check return value of ntpdate #58836


author: Harald Hoyer <harald@redhat.de> 4.1.1b-1
changelog:
  - updated to version 4.1.1b
  - improved initscript - use ntpdate on -x
  - improved initscript - open firewall only for timeservers
  - ntp-4.1.1a-adjtime.patch removed (already in source)
  - ntp-4.1.1a-mfp.patch removed (already in source)
  - ntp-4.0.99j-vsnprintf.patch removed (already in source)


author: Harald Hoyer <harald@redhat.com> - 4.2.0.a.20040617-4
changelog:
  - removed firewall hole punching from the initscript; rely on iptables
    ESTABLISHED,RELATED or manual firewall configuration


author: Jindrich Novy <jnovy@redhat.com> 4.2.0.a.20050816-1
changelog:
  - update to the latest stable 4.2.0.a.20050816
  - drop upstreamed .gcc4, .vsnprintf patches
  - remove obsolete .autofoo patch
  - make patch numbering less chaotic
  - don't package backup for .droproot patch


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-2
changelog:
  - Fix fails on upgrade, if ntpd is disabled (#166773)
  - A cosmetic patch. There are some comments and braces '{' '}' added.
  - One unprintable character was converted to octal-form .
  - It can be removed anytime (conversion of the cvs-projets for C-Frame 121,
  - (auto-debug, auto-trace for cfr-printnet server).


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-3
changelog:
  - A similar patch as ntp-4.0.99j-vsnprintf.patch in FEDORA CORE 4
  - (current patch is ntp-stable-4.2.0a-20050816-vsnprintf.patch)


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-10
changelog:
  - ntpd does not submit his local clock (if there is no peer).
    ntpdate->ntpd #163862 , Patch13: ntp-stable-4.2.0a-20050816-loconly.patch


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-11
changelog:
  - update man pages (#153195, #162856)
  - drop C-Frame-121, vsnprintf, minusTi and loconly patch
  - prevent segfault when loopback interface is not configured (#159056)
  - spec cleanup


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-12
changelog:
  - fix initscript:
    - replace -U with -u in getopts (#187003)
    - don't pass group to ntpdate -U argument and ignore -i in options (#142926)
    - set ntpconf for -c
    - remove -p 8 from ntpdate arguments
    - don't call ntpdate when step-tickers doesn't contain anything useful
      and -x isn't in options
  - fix default keyfile for ntpdate (#183196)


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-14
changelog:
  - modify ntp.conf, change default restrict, remove broadcastdelay,
    use fedora.pool.ntp.org (#189667)
  - don't install drift file
  - remove unsupported options from ntptrace manpage (#137717)
  - fix default paths in manpages for ntp-keygen and ntpdate


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2-3
changelog:
  - fix manycast support in ntpdate (#194329)
  - reply to manycast requests with null refid
  - enable mlockall (#195617)
  - correct threshold value in ntpdate manpage


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p4-1
changelog:
  - update to 4.2.2p4
  - fix buffer overflow in WWV Audio driver (#216309)
  - don't mark init script as config


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-1
changelog:
  - update to 4.2.4 (#146884)
  - don't use local clock in default config
  - autogenerate man pages from HTML
  - clean up spec a bit


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-3
changelog:
  - disable autoopts option preset mechanisms for ntpd
  - document -I option of ntpd
  - generate makewhatis friendly man pages


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-4
changelog:
  - don't wake up every second (#204748)
  - add option to enable memory locking (#195617)
  - fix broadcast client
  - use option values in ntp-keygen
  - improve man pages


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p0-1
changelog:
  - update to 4.2.4p0
  - fix init script
    - don't add second -g to ntpd options (#228424)
    - update getopts
    - skip all refclocks when parsing ntp.conf
  - spec cleanup


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p0-3
changelog:
  - fix interface updates with -I or -L option (#240254)
  - accept multiple -I options
  - fix broadcast client/server to accept/allow sending
    broadcasts on 255.255.255.255 (#226958)
  - fix return codes in init script (#240120)
  - exit with nonzero code if ntpd -q did not set clock (#240134)
  - drop revert452 patch, fixed in kernel 2.6.19
  - make with _smp_mflags


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p2-2
changelog:
  - ignore tentative addresses (#246297)
  - improve init script (#247003)
  - fix sleep patch
  - ease Autokey setup (#139673)
    - change default keysdir to /etc/ntp/crypto
    - set crypto password in /etc/ntp/crypto/pw
    - don't use randfile if /dev/urandom is used by OpenSSL
  - change default statsdir to /var/log/ntpstats/, use statistics type
    as default filename
  - package more doc files


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p2-5
changelog:
  - avoid use of uninitialized floating-point values in clock_select
  - update license tag (Tom "spot" Callaway)
  - drop sntp, MSNTP license is non-free


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-1
changelog:
  - update to 4.2.4p4
  - fix default NTP version for outgoing packets in ntpdate man page
    (#245408)
  - replace BSD with advertising code in ntpdc and ntpq


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-4
changelog:
  - reset kernel frequency when -x option is used
  - create separate init script for ntpdate
  - add note about paths and exit codes to ntpd man page


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-5
changelog:
  - fix building IPv6 support with new glibc-headers (#436713)
  - avoid unaligned memory access (#435301)
  - fix receiving broadcasts on 255.255.255.255


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-7
changelog:
  - reload resolv.conf after temporary failure in name resolution (#456743)
  - use clock_gettime
  - make subpackages for perl scripts and ntpdate (#452097, #456116)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p5-2
changelog:
  - retry failed name resolution few times before giving up (#460561)
  - don't write drift file upon exit
  - run ntpq with full path in ntp-wait script


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p6-1
changelog:
  - update to 4.2.4p6 (CVE-2009-0021)
  - include dhclient script (David Cantrell)
  - convert COPYRIGHT to UTF-8


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p6-4
changelog:
  - don't restart ntpd in dhclient script with every renewal
  - fix buffer overflow in ntpq (#490617)
  - check status in condrestart (#481261)
  - don't crash when compiled with HAVE_TIMER_CREATE (#486217)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-1
changelog:
  - update to 4.2.4p7 (CVE-2009-1252)
  - improve PLL response when kernel discipline is disabled
  - don't log STA_MODE changes
  - enable nanokernel support
  - allow minpoll 3
  - increase memlock limit
  - move html documentation to -doc subpackage (#492444)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-2
changelog:
  - fix frequency calculation when starting with no drift file
  - reduce phase adjustments beyond Allan intercept in daemon PLL


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-3
changelog:
  - handle system time jumps better
  - don't wake up every second for refclocks without timer
  - don't crash in ntpstat when unknown clock type is received (#505564)
  - make ntpstat process first packet in multipacket response
  - switch to editline
  - set pool.ntp.org vendor zone in spec (#512711)
  - compile with -fno-strict-aliasing


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-1
changelog:
  - update to 4.2.6p5 (#654004, #641800, #714079, #714084, #716968, #819781,
    - bind broadcast client to new interfaces (#973807)
  - allow selection of cipher for private key files (#749530)
  - retry few times in ntpdate init script before giving up (#673198)
  - print synchronization distance instead of dispersion in ntpstat (#830821)
  - ignore duplicate servers from dhclient (#862983)
  - add fourth server to default ntp.conf and use iburst (#667524, #623616)
  - drop comment enabling local driver in default config (#816645)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-2
changelog:
  - don't generate weak control key for resolver (CVE-2014-9293)
  - don't generate weak MD5 keys in ntp-keygen (CVE-2014-9294)
  - fix buffer overflows via specially-crafted packets (CVE-2014-9295)
  - don't mobilize passive association when authentication fails (CVE-2014-9296)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-3
changelog:
  - validate lengths of values in extension fields (CVE-2014-9297)
  - drop packets with spoofed source address ::1 (CVE-2014-9298)
  - add nanosecond support to SHM refclock (#1117704)
  - allow creating all SHM segments with owner-only access (#1122015)
  - allow symmetric keys up to 32 bytes again (#1053551)
  - fix calculation of root dispersion (#1045376)
  - fix crash in ntpq mreadvar command (#1165141)
  - don't step clock for leap second with -x option (#1190619)
  - don't drop packets with source port below 123 (#1171630)
  - use larger RSA exponent in ntp-keygen (#1184421)
  - refresh peers on routing updates (#1193850)
  - increase memlock limit again (#1053568)
  - warn when monitor can't be disabled due to limited restrict (#1166596)
  - improve documentation of restrict command (#1069019)
  - update logconfig documentation for patched default (#1193849)
  - don't build ntpsnmpd (#995134)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-5
changelog:
  - reject packets without MAC when authentication is enabled (CVE-2015-1798)
  - protect symmetric associations with symmetric key against DoS attack
    (CVE-2015-1799)
  - fix generation of MD5 keys with ntp-keygen on big-endian systems
    (CVE-2015-3405)
  - log when stepping clock for leap second or ignoring it with -x (#1204625)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-5.el6_7.2
changelog:
  - check origin timestamp before accepting KoD RATE packet (CVE-2015-7704)
  - allow only one step larger than panic threshold with -g (CVE-2015-5300)


